| Message ID | 20230301154514.3292154-4-neeraj.sanjaykale@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for NXP bluetooth chipsets | expand |
On Wed, 1 Mar 2023, Neeraj Sanjay Kale wrote: > This adds a driver based on serdev driver for the NXP BT serial protocol > based on running H:4, which can enable the built-in Bluetooth device > inside an NXP BT chip. > > This driver has Power Save feature that will put the chip into sleep state > whenever there is no activity for 2000ms, and will be woken up when any > activity is to be initiated over UART. > > This driver enables the power save feature by default by sending the vendor > specific commands to the chip during setup. > > During setup, the driver checks if a FW is already running on the chip > by waiting for the bootloader signature, and downloads device specific FW > file into the chip over UART if bootloader signature is received.. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> > --- > v2: Removed conf file support and added static data for each chip based > on compatibility devices mentioned in DT bindings. Handled potential > memory leaks and null pointer dereference issues, simplified FW download > feature, handled byte-order and few cosmetic changes. (Ilpo Järvinen, > Alok Tiwari, Hillf Danton) > v3: Added conf file support necessary to support different vendor modules, > moved .h file contents to .c, cosmetic changes. (Luiz Augusto von Dentz, > Rob Herring, Leon Romanovsky) > v4: Removed conf file support, optimized driver data, add logic to select > FW name based on chip signature (Greg KH, Ilpo Jarvinen, Sherry Sun) > v5: Replaced bt_dev_info() with bt_dev_dbg(), handled user-space cmd > parsing in nxp_enqueue() in a better way. (Greg KH, Luiz Augusto von Dentz) > v6: Add support for fw-init-baudrate parameter from device tree, > modified logic to detect FW download is needed or FW is running. (Greg > KH, Sherry Sun) > --- > MAINTAINERS | 1 + > drivers/bluetooth/Kconfig | 11 + > drivers/bluetooth/Makefile | 1 + > drivers/bluetooth/btnxpuart.c | 1317 +++++++++++++++++++++++++++++++++ > 4 files changed, 1330 insertions(+) > create mode 100644 drivers/bluetooth/btnxpuart.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 030ec6fe89df..fdb9b0788c89 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -22840,6 +22840,7 @@ M: Amitkumar Karwar <amitkumar.karwar@nxp.com> > M: Neeraj Kale <neeraj.sanjaykale@nxp.com> > S: Maintained > F: Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml > +F: drivers/bluetooth/btnxpuart.c > > THE REST > M: Linus Torvalds <torvalds@linux-foundation.org> > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig > index 5a1a7bec3c42..359a4833e31f 100644 > --- a/drivers/bluetooth/Kconfig > +++ b/drivers/bluetooth/Kconfig > @@ -465,4 +465,15 @@ config BT_VIRTIO > Say Y here to compile support for HCI over Virtio into the > kernel or say M to compile as a module. > > +config BT_NXPUART > + tristate "NXP protocol support" > + depends on SERIAL_DEV_BUS > + help > + NXP is serial driver required for NXP Bluetooth > + devices with UART interface. > + > + Say Y here to compile support for NXP Bluetooth UART device into > + the kernel, or say M here to compile as a module (btnxpuart). > + > + > endmenu > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile > index e0b261f24fc9..7a5967e9ac48 100644 > --- a/drivers/bluetooth/Makefile > +++ b/drivers/bluetooth/Makefile > @@ -29,6 +29,7 @@ obj-$(CONFIG_BT_QCA) += btqca.o > obj-$(CONFIG_BT_MTK) += btmtk.o > > obj-$(CONFIG_BT_VIRTIO) += virtio_bt.o > +obj-$(CONFIG_BT_NXPUART) += btnxpuart.o > > obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o > > diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c > new file mode 100644 > index 000000000000..f581e05ddecb > --- /dev/null > +++ b/drivers/bluetooth/btnxpuart.c > @@ -0,0 +1,1317 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * NXP Bluetooth driver > + * Copyright 2018-2023 NXP > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > + > +#include <linux/serdev.h> > +#include <linux/of.h> > +#include <linux/skbuff.h> > +#include <asm/unaligned.h> > +#include <linux/firmware.h> > +#include <linux/string.h> > +#include <linux/crc8.h> > +#include <linux/crc32.h> > + > +#include <net/bluetooth/bluetooth.h> > +#include <net/bluetooth/hci_core.h> > + > +#include "h4_recv.h" > + > +#define MANUFACTURER_NXP 37 > + > +#define BTNXPUART_TX_STATE_ACTIVE 1 > +#define BTNXPUART_FW_DOWNLOADING 2 > +#define BTNXPUART_CHECK_BOOT_SIGNATURE 3 > + > +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" > +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" > +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" > +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" > +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" > + > +#define CHIP_ID_W9098 0x5c03 > +#define CHIP_ID_IW416 0x7201 > +#define CHIP_ID_IW612 0x7601 > + > +#define HCI_NXP_PRI_BAUDRATE 115200 > +#define HCI_NXP_SEC_BAUDRATE 3000000 > + > +#define MAX_FW_FILE_NAME_LEN 50 > + > +/* Default ps timeout period in milli-second */ > +#define PS_DEFAULT_TIMEOUT_PERIOD 2000 > + > +/* wakeup methods */ > +#define WAKEUP_METHOD_DTR 0 > +#define WAKEUP_METHOD_BREAK 1 > +#define WAKEUP_METHOD_EXT_BREAK 2 > +#define WAKEUP_METHOD_RTS 3 > +#define WAKEUP_METHOD_INVALID 0xff > + > +/* power save mode status */ > +#define PS_MODE_DISABLE 0 > +#define PS_MODE_ENABLE 1 > + > +/* Power Save Commands to ps_work_func */ > +#define PS_CMD_EXIT_PS 1 > +#define PS_CMD_ENTER_PS 2 > + > +/* power save state */ > +#define PS_STATE_AWAKE 0 > +#define PS_STATE_SLEEP 1 > + > +/* Bluetooth vendor command : Sleep mode */ > +#define HCI_NXP_AUTO_SLEEP_MODE 0xfc23 > +/* Bluetooth vendor command : Wakeup method */ > +#define HCI_NXP_WAKEUP_METHOD 0xfc53 > +/* Bluetooth vendor command : Set operational baudrate */ > +#define HCI_NXP_SET_OPER_SPEED 0xfc09 > +/* Bluetooth vendor command: Independent Reset */ > +#define HCI_NXP_IND_RESET 0xfcfc > + > +/* Bluetooth Power State : Vendor cmd params */ > +#define BT_PS_ENABLE 0x02 > +#define BT_PS_DISABLE 0x03 > + > +/* Bluetooth Host Wakeup Methods */ > +#define BT_HOST_WAKEUP_METHOD_NONE 0x00 > +#define BT_HOST_WAKEUP_METHOD_DTR 0x01 > +#define BT_HOST_WAKEUP_METHOD_BREAK 0x02 > +#define BT_HOST_WAKEUP_METHOD_GPIO 0x03 > + > +/* Bluetooth Chip Wakeup Methods */ > +#define BT_CTRL_WAKEUP_METHOD_DSR 0x00 > +#define BT_CTRL_WAKEUP_METHOD_BREAK 0x01 > +#define BT_CTRL_WAKEUP_METHOD_GPIO 0x02 > +#define BT_CTRL_WAKEUP_METHOD_EXT_BREAK 0x04 > +#define BT_CTRL_WAKEUP_METHOD_RTS 0x05 > + > +#define MAX_USER_PARAMS 10 > + > +struct ps_data { > + u8 ps_mode; > + u8 cur_psmode; > + u8 ps_state; I tried to follow the code around these variables but its turned out too hard for me... Should ps_mode perhaps be renamed to target_psmode? Should nxp_enqueue() check if ps_mode was changed or not before calling hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); ? It would be useful to explain somewhere how cur_psmode and ps_state actually differ because they kinda sound the same. > + u8 ps_cmd; > + u8 h2c_wakeupmode; > + u8 cur_h2c_wakeupmode; > + u8 c2h_wakeupmode; > + u8 c2h_wakeup_gpio; > + bool driver_sent_cmd; > + bool timer_on; Look unnecessary, only used to guard del_timer_sync() but it already check for timer_pending(). > + u32 interval; > + struct hci_dev *hdev; > + struct work_struct work; > + struct timer_list ps_timer; > +}; > + case WAKEUP_METHOD_BREAK: > + default: > + if (ps_state == PS_STATE_AWAKE) > + status = serdev_device_break_ctl(nxpdev->serdev, 0); > + else > + status = serdev_device_break_ctl(nxpdev->serdev, -1); > + bt_dev_dbg(hdev, "Set UART break: %s, status=%d", > + ps_state == PS_STATE_AWAKE ? "off" : "on", status); str_on_off() from linux/string_helpers.h > +static int send_wakeup_method_cmd(struct hci_dev *hdev, void *data) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct ps_data *psdata = nxpdev->psdata; > + u8 pcmd[4]; > + struct sk_buff *skb; > + u8 *status; > + > + pcmd[0] = psdata->c2h_wakeupmode; > + pcmd[1] = psdata->c2h_wakeup_gpio; > + switch (psdata->h2c_wakeupmode) { > + case WAKEUP_METHOD_DTR: > + pcmd[2] = BT_CTRL_WAKEUP_METHOD_DSR; > + break; > + case WAKEUP_METHOD_BREAK: > + default: > + pcmd[2] = BT_CTRL_WAKEUP_METHOD_BREAK; > + break; > + } > + pcmd[3] = 0xff; Looks like an unnamed structure. > +static void ps_init(struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct ps_data *psdata = nxpdev->psdata; > + > + serdev_device_set_tiocm(nxpdev->serdev, 0, TIOCM_RTS); > + usleep_range(5000, 10000); > + serdev_device_set_tiocm(nxpdev->serdev, TIOCM_RTS, 0); > + usleep_range(5000, 10000); > + > + switch (psdata->h2c_wakeupmode) { > + case WAKEUP_METHOD_DTR: > + serdev_device_set_tiocm(nxpdev->serdev, 0, TIOCM_DTR); > + serdev_device_set_tiocm(nxpdev->serdev, TIOCM_DTR, 0); > + break; > + case WAKEUP_METHOD_BREAK: > + default: > + serdev_device_break_ctl(nxpdev->serdev, -1); > + usleep_range(5000, 10000); > + serdev_device_break_ctl(nxpdev->serdev, 0); > + usleep_range(5000, 10000); > + break; > + } > + if (!test_bit(HCI_RUNNING, &hdev->flags)) { > + bt_dev_dbg(hdev, "HCI_RUNNING is not set"); > + return; Is this an error that should be returned through the callchain rather than concealed? > + } > + if (psdata->cur_h2c_wakeupmode != psdata->h2c_wakeupmode) > + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, NULL, NULL); > + if (psdata->cur_psmode != psdata->ps_mode) > + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); > +} > + > +/* NXP Firmware Download Feature */ > +static int nxp_download_firmware(struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + int err = 0; > + > + nxpdev->fw_dnld_v1_offset = 0; > + nxpdev->fw_v1_sent_bytes = 0; > + nxpdev->fw_v1_expected_len = HDR_LEN; > + nxpdev->fw_v3_offset_correction = 0; > + nxpdev->baudrate_changed = false; > + nxpdev->timeout_changed = false; > + > + serdev_device_set_baudrate(nxpdev->serdev, HCI_NXP_PRI_BAUDRATE); > + serdev_device_set_flow_control(nxpdev->serdev, 0); > + nxpdev->current_baudrate = HCI_NXP_PRI_BAUDRATE; > + > + /* Wait till FW is downloaded and CTS becomes low */ > + err = wait_event_interruptible_timeout(nxpdev->fw_dnld_done_wait_q, > + !test_bit(BTNXPUART_FW_DOWNLOADING, > + &nxpdev->tx_state), > + msecs_to_jiffies(60000)); > + if (err == 0) { > + bt_dev_err(hdev, "FW Download Timeout."); > + return -ETIMEDOUT; > + } > + > + serdev_device_set_flow_control(nxpdev->serdev, 1); > + err = serdev_device_wait_for_cts(nxpdev->serdev, 1, 60000); > + if (err < 0) { > + bt_dev_err(hdev, "CTS is still high. FW Download failed."); > + return err; > + } > + release_firmware(nxpdev->fw); > + memset(nxpdev->fw_name, 0, MAX_FW_FILE_NAME_LEN); Use sizeof() instead. > + > + /* Allow the downloaded FW to initialize */ > + usleep_range(800000, 1000000); There would be USEC_PER_* constants to make these easier to read. > + return 0; > +} > + > +static void nxp_send_ack(u8 ack, struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + u8 ack_nak[2]; > + > + if (ack == NXP_ACK_V1 || ack == NXP_NAK_V1) { > + ack_nak[0] = ack; > + serdev_device_write_buf(nxpdev->serdev, ack_nak, 1); > + } else if (ack == NXP_ACK_V3) { > + ack_nak[0] = ack; > + ack_nak[1] = crc8(crc8_table, ack_nak, 1, 0xff); > + serdev_device_write_buf(nxpdev->serdev, ack_nak, 2); > + } This could be done as: int len = 1; ack_nak[0] = ack; if (ack == NXP_ACK_V3) { len = 2; ack_nak[1] = crc8(crc8_table, ack_nak, 1, 0xff); } serdev_device_write_buf(nxpdev->serdev, ack_nak, len); or calculate the len with NXP_ACK_V3 ? 2 : 1 on the func call line. > +} > + > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 req_len) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct nxp_bootloader_cmd nxp_cmd5; > + struct uart_config uart_config; > + > + if (req_len == sizeof(nxp_cmd5)) { > + nxp_cmd5.header = __cpu_to_le32(5); > + nxp_cmd5.arg = 0; > + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > + sizeof(nxp_cmd5) - 4)); swab32(crc32_be(...)) seems and odd construct instead of __cpu_to_le32(). > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd5, req_len); > + nxpdev->fw_v3_offset_correction += req_len; > + } else if (req_len == sizeof(uart_config)) { > + uart_config.clkdiv.address = __cpu_to_le32(CLKDIVADDR); > + uart_config.clkdiv.value = __cpu_to_le32(0x00c00000); > + uart_config.uartdiv.address = __cpu_to_le32(UARTDIVADDR); > + uart_config.uartdiv.value = __cpu_to_le32(1); > + uart_config.mcr.address = __cpu_to_le32(UARTMCRADDR); > + uart_config.mcr.value = __cpu_to_le32(MCR); > + uart_config.re_init.address = __cpu_to_le32(UARTREINITADDR); > + uart_config.re_init.value = __cpu_to_le32(INIT); > + uart_config.icr.address = __cpu_to_le32(UARTICRADDR); > + uart_config.icr.value = __cpu_to_le32(ICR); > + uart_config.fcr.address = __cpu_to_le32(UARTFCRADDR); > + uart_config.fcr.value = __cpu_to_le32(FCR); > + uart_config.crc = swab32(crc32_be(0UL, (char *)&uart_config, > + sizeof(uart_config) - 4)); Ditto. > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&uart_config, req_len); > + serdev_device_wait_until_sent(nxpdev->serdev, 0); > + nxpdev->fw_v3_offset_correction += req_len; > + return true; > + } > + return false; > +} > + > +static bool nxp_fw_change_timeout(struct hci_dev *hdev, u16 req_len) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct nxp_bootloader_cmd nxp_cmd7; > + > + if (req_len != sizeof(nxp_cmd7)) > + return false; > + > + nxp_cmd7.header = __cpu_to_le32(7); > + nxp_cmd7.arg = __cpu_to_le32(0x70); > + nxp_cmd7.payload_len = 0; > + nxp_cmd7.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd7, > + sizeof(nxp_cmd7) - 4)); Ditto. > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, req_len); Is it safe to assume req_len is small enough to not leak stack content? > + serdev_device_wait_until_sent(nxpdev->serdev, 0); > + nxpdev->fw_v3_offset_correction += req_len; > + return true; > +} > + > +static u32 nxp_get_data_len(const u8 *buf) > +{ > + struct nxp_bootloader_cmd *hdr = (struct nxp_bootloader_cmd *)buf; > + > + return __le32_to_cpu(hdr->payload_len); > +} > + > +/* for legacy chipsets with V1 bootloader */ > +static int nxp_recv_fw_req_v1(struct hci_dev *hdev, struct sk_buff *skb) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct btnxpuart_data *nxp_data = nxpdev->nxp_data; > + struct v1_data_req *req; > + u32 requested_len; > + int err; > + > + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { > + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); > + goto ret; > + } > + > + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) > + goto ret; This appears in both v1 and v3 (x2) functions, add a common helper for it. > + req = (struct v1_data_req *)skb_pull_data(skb, sizeof(struct v1_data_req)); > + if (!req) > + goto ret; > + > + if ((req->len ^ req->len_comp) != 0xffff) { > + bt_dev_dbg(hdev, "ERR: Send NAK"); > + nxp_send_ack(NXP_NAK_V1, hdev); > + goto ret; > + } > + nxp_send_ack(NXP_ACK_V1, hdev); > + > + if (nxp_data->fw_dnld_use_high_baudrate) { > + if (!nxpdev->timeout_changed) { > + nxpdev->timeout_changed = nxp_fw_change_timeout(hdev, req->len); > + goto ret; > + } > + if (!nxpdev->baudrate_changed) { > + nxpdev->baudrate_changed = nxp_fw_change_baudrate(hdev, req->len); > + if (nxpdev->baudrate_changed) { > + serdev_device_set_baudrate(nxpdev->serdev, > + HCI_NXP_SEC_BAUDRATE); > + serdev_device_set_flow_control(nxpdev->serdev, 1); > + nxpdev->current_baudrate = HCI_NXP_SEC_BAUDRATE; > + } > + goto ret; > + } > + } > + > + if (!strlen(nxpdev->fw_name)) { > + snprintf(nxpdev->fw_name, MAX_FW_FILE_NAME_LEN, "%s", > + nxp_data->fw_name); > + bt_dev_info(hdev, "Request Firmware: %s", nxpdev->fw_name); Don't print at all when there's no error here. > + err = request_firmware(&nxpdev->fw, nxpdev->fw_name, &hdev->dev); > + if (err < 0) { > + bt_dev_err(hdev, "Firmware file %s not found", nxpdev->fw_name); > + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + return err; > + } > + } v1 and v3 duplicates this block except for how the fw_name is acquired, create a helper. > + requested_len = req->len; > + if (requested_len == 0) { > + bt_dev_info(hdev, "FW Downloaded Successfully: %zu bytes", nxpdev->fw->size); > + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q); > + goto ret; > + } > + if (requested_len & 0x01) { > + /* The CRC did not match at the other end. > + * Simply send the same bytes again. > + */ > + requested_len = nxpdev->fw_v1_sent_bytes; > + bt_dev_dbg(hdev, "CRC error. Resend %d bytes of FW.", requested_len); > + } else { > + nxpdev->fw_dnld_v1_offset += nxpdev->fw_v1_sent_bytes; > + > + /* The FW bin file is made up of many blocks of > + * 16 byte header and payload data chunks. If the > + * FW has requested a header, read the payload length > + * info from the header, before sending the header. > + * In the next iteration, the FW should request the > + * payload data chunk, which should be equal to the > + * payload length read from header. If there is a > + * mismatch, clearly the driver and FW are out of sync, > + * and we need to re-send the previous header again. > + */ > + if (requested_len == nxpdev->fw_v1_expected_len) { > + if (requested_len == HDR_LEN) > + nxpdev->fw_v1_expected_len = nxp_get_data_len(nxpdev->fw->data + > + nxpdev->fw_dnld_v1_offset); > + else > + nxpdev->fw_v1_expected_len = HDR_LEN; > + } else { > + if (requested_len == HDR_LEN) { else if > + /* FW download out of sync. Send previous chunk again */ > + nxpdev->fw_dnld_v1_offset -= nxpdev->fw_v1_sent_bytes; > + nxpdev->fw_v1_expected_len = HDR_LEN; > + } > + } > + } > + > + if (nxpdev->fw_dnld_v1_offset + requested_len <= nxpdev->fw->size) > + serdev_device_write_buf(nxpdev->serdev, > + nxpdev->fw->data + nxpdev->fw_dnld_v1_offset, > + requested_len); > + nxpdev->fw_v1_sent_bytes = requested_len; > + > +ret: > + kfree_skb(skb); > + return 0; > +} > + > +static u8 *nxp_get_fw_name_from_chipid(struct hci_dev *hdev, u16 chipid) > +{ > + u8 *fw_name = NULL; > + > + switch (chipid) { > + case CHIP_ID_W9098: > + fw_name = FIRMWARE_W9098; > + break; > + case CHIP_ID_IW416: > + fw_name = FIRMWARE_IW416; > + break; > + case CHIP_ID_IW612: > + fw_name = FIRMWARE_IW612; > + break; > + default: > + bt_dev_err(hdev, "Unknown chip signature %04X", chipid); %04x ? > + break; > + } > + return fw_name; > +} > + > +static int nxp_recv_chip_ver_v3(struct hci_dev *hdev, struct sk_buff *skb) > +{ > + struct v3_start_ind *req = skb_pull_data(skb, sizeof(struct v3_start_ind)); > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + int err; > + > + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { > + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); > + goto ret; > + } > + > + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) > + goto ret; > + > + if (!strlen(nxpdev->fw_name)) { > + snprintf(nxpdev->fw_name, MAX_FW_FILE_NAME_LEN, "%s", > + nxp_get_fw_name_from_chipid(hdev, req->chip_id)); > + > + bt_dev_info(hdev, "Request Firmware: %s", nxpdev->fw_name); > + err = request_firmware(&nxpdev->fw, nxpdev->fw_name, &hdev->dev); > + if (err < 0) { > + bt_dev_err(hdev, "Firmware file %s not found", nxpdev->fw_name); > + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + goto ret; > + } > + } > + nxp_send_ack(NXP_ACK_V3, hdev); > +ret: > + kfree_skb(skb); > + return 0; > +} > + > +static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct v3_data_req *req; > + > + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { > + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); > + goto ret; > + } > + > + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) > + goto ret; > + > + req = (struct v3_data_req *)skb_pull_data(skb, sizeof(struct v3_data_req)); > + if (!req || !nxpdev || !nxpdev->fw) > + goto ret; Can nxpdev really be NULL here? > + nxp_send_ack(NXP_ACK_V3, hdev); > + > + if (!nxpdev->timeout_changed) { > + nxpdev->timeout_changed = nxp_fw_change_timeout(hdev, req->len); > + goto ret; > + } > + > + if (!nxpdev->baudrate_changed) { > + nxpdev->baudrate_changed = nxp_fw_change_baudrate(hdev, req->len); > + if (nxpdev->baudrate_changed) { > + serdev_device_set_baudrate(nxpdev->serdev, > + HCI_NXP_SEC_BAUDRATE); > + serdev_device_set_flow_control(nxpdev->serdev, 1); > + nxpdev->current_baudrate = HCI_NXP_SEC_BAUDRATE; > + } > + goto ret; > + } > + > + if (req->len == 0) { > + bt_dev_info(hdev, "FW Downloaded Successfully: %zu bytes", nxpdev->fw->size); > + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q); > + goto ret; > + } > + if (req->error) > + bt_dev_dbg(hdev, "FW Download received err 0x%02x from chip. Resending FW chunk.", > + req->error); It feels something might be off here, because regardless of req->error, the same serdev_device_write_buf() will occur so the "Resending" part of the comment doesn't make much of a sense. > + if (req->offset < nxpdev->fw_v3_offset_correction) { > + /* This scenario should ideally never occur. > + * But if it ever does, FW is out of sync and > + * needs a power cycle. Use 80 columns. > + */ > + bt_dev_err(hdev, "Something went wrong during FW download. Please power cycle and try again"); > + goto ret; > + } > + > + serdev_device_write_buf(nxpdev->serdev, > + nxpdev->fw->data + req->offset - nxpdev->fw_v3_offset_correction, > + req->len); > + > +ret: > + kfree_skb(skb); > + return 0; > +} > + > +static int nxp_set_baudrate_cmd(struct hci_dev *hdev, void *data) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + u32 new_baudrate = __cpu_to_le32(nxpdev->new_baudrate); __le32 new_baudrate > +static bool nxp_check_boot_sign(struct btnxpuart_dev *nxpdev) > +{ > + int ret; > + > + serdev_device_set_baudrate(nxpdev->serdev, HCI_NXP_PRI_BAUDRATE); > + serdev_device_set_flow_control(nxpdev->serdev, 0); > + set_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > + > + ret = wait_event_interruptible_timeout(nxpdev->check_boot_sign_wait_q, > + !test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, > + &nxpdev->tx_state), > + msecs_to_jiffies(1000)); > + if (ret == 0) > + return false; > + else > + return true; How does does this handle -ERESTARTSYS? But this runs in nxp_setup() so is that even relevant (I don't know). You can also rely on int -> bool conversion here instead of open-coding with if () ... > +} > + > +static int nxp_setup(struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + int err = 0; > + > + if (!nxpdev) > + return 0; How can this happen?? > + set_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + init_waitqueue_head(&nxpdev->fw_dnld_done_wait_q); > + init_waitqueue_head(&nxpdev->check_boot_sign_wait_q); > + > + if (nxp_check_boot_sign(nxpdev)) { > + bt_dev_dbg(hdev, "Need FW Download."); > + err = nxp_download_firmware(hdev); > + if (err < 0) > + return err; > + } else { > + bt_dev_dbg(hdev, "FW already running."); > + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); > + } > + > + serdev_device_set_flow_control(nxpdev->serdev, 1); > + device_property_read_u32(&nxpdev->serdev->dev, "fw-init-baudrate", > + &nxpdev->fw_init_baudrate); > + if (!nxpdev->fw_init_baudrate) > + nxpdev->fw_init_baudrate = FW_INIT_BAUDRATE; > + serdev_device_set_baudrate(nxpdev->serdev, nxpdev->fw_init_baudrate); > + nxpdev->current_baudrate = nxpdev->fw_init_baudrate; > + > + if (nxpdev->current_baudrate != HCI_NXP_SEC_BAUDRATE) { > + nxpdev->new_baudrate = HCI_NXP_SEC_BAUDRATE; > + hci_cmd_sync_queue(hdev, nxp_set_baudrate_cmd, NULL, NULL); > + } > + > + ps_init(hdev); > + > + return 0; > +} > + > +static int nxp_enqueue(struct hci_dev *hdev, struct sk_buff *skb) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + struct ps_data *psdata = nxpdev->psdata; > + struct hci_command_hdr *hdr; > + u8 param[MAX_USER_PARAMS]; > + > + if (!nxpdev || !psdata) > + goto free_skb; > + > + /* if vendor commands are received from user space (e.g. hcitool), update > + * driver flags accordingly and ask driver to re-send the command to FW. > + */ > + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT && !psdata->driver_sent_cmd) { Should this !psdata->driver_sent_cmd do something else than end up into a place labelled send_skb. Maybe return early (or free skb + return)? There's a comment elsewhere stating: "set flag to prevent re-sending command in nxp_enqueue." > + if (!skb->len || skb->len > (MAX_USER_PARAMS + HCI_COMMAND_HDR_SIZE)) > + goto send_skb; > + > + hdr = (struct hci_command_hdr *)skb->data; > + if (hdr->plen != (skb->len - HCI_COMMAND_HDR_SIZE)) > + goto send_skb; Are these two gotos happily sending invalid skbs? > + memcpy(param, skb->data + HCI_COMMAND_HDR_SIZE, hdr->plen); > + switch (__le16_to_cpu(hdr->opcode)) { > + case HCI_NXP_AUTO_SLEEP_MODE: > + if (hdr->plen >= 1) { > + if (param[0] == BT_PS_ENABLE) > + psdata->ps_mode = PS_MODE_ENABLE; > + else if (param[0] == BT_PS_DISABLE) > + psdata->ps_mode = PS_MODE_DISABLE; > + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); > + goto free_skb; > + } > + break; > + case HCI_NXP_WAKEUP_METHOD: > + if (hdr->plen >= 4) { > + psdata->c2h_wakeupmode = param[0]; > + psdata->c2h_wakeup_gpio = param[1]; > + switch (param[2]) { > + case BT_CTRL_WAKEUP_METHOD_DSR: > + psdata->h2c_wakeupmode = WAKEUP_METHOD_DTR; > + break; > + case BT_CTRL_WAKEUP_METHOD_BREAK: > + default: > + psdata->h2c_wakeupmode = WAKEUP_METHOD_BREAK; > + break; > + } > + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, NULL, NULL); > + goto free_skb; > + } > + break; > + case HCI_NXP_SET_OPER_SPEED: > + if (hdr->plen == 4) { > + nxpdev->new_baudrate = *((u32 *)param); > + hci_cmd_sync_queue(hdev, nxp_set_baudrate_cmd, NULL, NULL); > + goto free_skb; > + } > + break; > + case HCI_NXP_IND_RESET: > + if (hdr->plen == 1) { > + hci_cmd_sync_queue(hdev, nxp_set_ind_reset, NULL, NULL); > + goto free_skb; > + } > + break; > + default: > + break; Okay to end up into place labelled send_skb? > + } > + } > + > +send_skb: > + /* Prepend skb with frame type */ > + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); > + skb_queue_tail(&nxpdev->txq, skb); > + > + btnxpuart_tx_wakeup(nxpdev); > +ret: > + return 0; > + > +free_skb: > + kfree_skb(skb); > + goto ret; > +} > + > +static struct sk_buff *nxp_dequeue(void *data) > +{ > + struct btnxpuart_dev *nxpdev = (struct btnxpuart_dev *)data; > + > + ps_wakeup(nxpdev); > + ps_start_timer(nxpdev); > + return skb_dequeue(&nxpdev->txq); > +} > +static int btnxpuart_close(struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + > + if (!nxpdev) > + return 0; Can it be NULL here? > + serdev_device_close(nxpdev->serdev); > + > + return 0; > +} > + > +static int btnxpuart_flush(struct hci_dev *hdev) > +{ > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > + > + if (!nxpdev) > + return 0; Ditto. > + /* Flush any pending characters */ > + serdev_device_write_flush(nxpdev->serdev); > + skb_queue_purge(&nxpdev->txq); > + > + cancel_work_sync(&nxpdev->tx_work); > + > + kfree_skb(nxpdev->rx_skb); > + nxpdev->rx_skb = NULL; > + > + return 0; > +} > + > +static const struct h4_recv_pkt nxp_recv_pkts[] = { > + { H4_RECV_ACL, .recv = hci_recv_frame }, > + { H4_RECV_SCO, .recv = hci_recv_frame }, > + { H4_RECV_EVENT, .recv = hci_recv_frame }, > + { NXP_RECV_FW_REQ_V1, .recv = nxp_recv_fw_req_v1 }, > + { NXP_RECV_CHIP_VER_V3, .recv = nxp_recv_chip_ver_v3 }, > + { NXP_RECV_FW_REQ_V3, .recv = nxp_recv_fw_req_v3 }, > +}; > + > +static bool is_valid_bootloader_signature(const u8 *data, size_t count) > +{ > + if ((*data == NXP_V1_FW_REQ_PKT && count == sizeof(struct v1_data_req) + 1) || > + (*data == NXP_V3_FW_REQ_PKT && count == sizeof(struct v3_data_req) + 1) || > + (*data == NXP_V3_CHIP_VER_PKT && count == sizeof(struct v3_start_ind) + 1)) > + return true; > + else > + return false; > +} > + > +static int btnxpuart_receive_buf(struct serdev_device *serdev, const u8 *data, > + size_t count) > +{ > + struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev); > + > + if (test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) { > + if (!is_valid_bootloader_signature(data, count)) { Use && instead of cascading. > + /* Unknown bootloader signature, skip without returning error */ > + return count; > + } > + } > + > + ps_start_timer(nxpdev); > + > + nxpdev->rx_skb = h4_recv_buf(nxpdev->hdev, nxpdev->rx_skb, data, count, > + nxp_recv_pkts, ARRAY_SIZE(nxp_recv_pkts)); > + if (IS_ERR(nxpdev->rx_skb)) { > + int err = PTR_ERR(nxpdev->rx_skb); > + > + bt_dev_err(nxpdev->hdev, "Frame reassembly failed (%d)", err); > + nxpdev->rx_skb = NULL; > + return err; > + } > + nxpdev->hdev->stat.byte_rx += count; > + return count; > +} > + > +static void btnxpuart_write_wakeup(struct serdev_device *serdev) > +{ > + serdev_device_write_wakeup(serdev); > +} > + > +static const struct serdev_device_ops btnxpuart_client_ops = { > + .receive_buf = btnxpuart_receive_buf, > + .write_wakeup = btnxpuart_write_wakeup, > +}; > + > +static int nxp_serdev_probe(struct serdev_device *serdev) > +{ > + struct hci_dev *hdev; > + struct btnxpuart_dev *nxpdev; > + > + nxpdev = devm_kzalloc(&serdev->dev, sizeof(*nxpdev), GFP_KERNEL); > + if (!nxpdev) > + return -ENOMEM; > + > + nxpdev->nxp_data = (struct btnxpuart_data *)device_get_match_data(&serdev->dev); > + > + nxpdev->serdev = serdev; > + serdev_device_set_drvdata(serdev, nxpdev); > + > + serdev_device_set_client_ops(serdev, &btnxpuart_client_ops); > + > + INIT_WORK(&nxpdev->tx_work, btnxpuart_tx_work); > + skb_queue_head_init(&nxpdev->txq); > + > + /* Initialize and register HCI device */ > + hdev = hci_alloc_dev(); > + if (!hdev) { > + dev_err(&serdev->dev, "Can't allocate HCI device\n"); > + return -ENOMEM; > + } > + > + nxpdev->hdev = hdev; > + > + hdev->bus = HCI_UART; > + hci_set_drvdata(hdev, nxpdev); > + > + hdev->manufacturer = MANUFACTURER_NXP; > + hdev->open = btnxpuart_open; > + hdev->close = btnxpuart_close; > + hdev->flush = btnxpuart_flush; > + hdev->setup = nxp_setup; > + hdev->send = nxp_enqueue; > + SET_HCIDEV_DEV(hdev, &serdev->dev); > + > + if (hci_register_dev(hdev) < 0) { > + dev_err(&serdev->dev, "Can't register HCI device\n"); > + hci_free_dev(hdev); > + return -ENODEV; > + } > + > + if (!ps_init_work(hdev)) > + ps_init_timer(hdev); Eh, shouldn't this fail the probe on error? But then, why is psdata not embedded into btnxpuart_dev but separately allocated? > + crc8_populate_msb(crc8_table, POLYNOMIAL8); Is it okay to populate after HCI device is registered?
On Wed, Mar 01, 2023 at 09:15:14PM +0530, Neeraj Sanjay Kale wrote: > This adds a driver based on serdev driver for the NXP BT serial protocol > based on running H:4, which can enable the built-in Bluetooth device > inside an NXP BT chip. > > This driver has Power Save feature that will put the chip into sleep state > whenever there is no activity for 2000ms, and will be woken up when any > activity is to be initiated over UART. > > This driver enables the power save feature by default by sending the vendor > specific commands to the chip during setup. > > During setup, the driver checks if a FW is already running on the chip > by waiting for the bootloader signature, and downloads device specific FW > file into the chip over UART if bootloader signature is received.. > > Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> <snip> > +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" > +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" > +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" > +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" > +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" Where are this files coming from? Where can I download those? Is loading a combo firmware from the mwifiex driver supported? > +#define HCI_NXP_PRI_BAUDRATE 115200 > +#define HCI_NXP_SEC_BAUDRATE 3000000 What if the UART device does not support 3000000 baudrate (think at limitation on the clock source/divider of the UART)? Shouldn't this be configurable? > +#define NXP_V1_FW_REQ_PKT 0xa5 > +#define NXP_V1_CHIP_VER_PKT 0xaa > +#define NXP_V3_FW_REQ_PKT 0xa7 > +#define NXP_V3_CHIP_VER_PKT 0xab > + > +#define NXP_ACK_V1 0x5a > +#define NXP_NAK_V1 0xbf > +#define NXP_ACK_V3 0x7a > +#define NXP_NAK_V3 0x7b > +#define NXP_CRC_ERROR_V3 0x7c I assume this was already discussed, but the *_V1 looks just like the existing Marvell protocol, is it really worth a new driver? I did not check all the details here, so maybe the answer is just yes. Francesco
Hi Ilpo, Thank you for reviewing this patch. I have resolved most of your review comments in v7 patch, and I have some clarification inline below: > > + > > +struct ps_data { > > + u8 ps_mode; > > + u8 cur_psmode; > > + u8 ps_state; > > I tried to follow the code around these variables but its turned out too hard > for me... Should ps_mode perhaps be renamed to target_psmode? > Renamed to target_psmode since it makes more sense. I have also added a comment for few confusing variables. > Should nxp_enqueue() check if ps_mode was changed or not before calling > hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); ? No. If it does, then the user space tool (hcitool) stays in waiting state for a response. Our intension here in nxp_enqueue() is to simple parse the vendor commands coming from user space (only), and cache few important contents of the command parameters in driver, and pass on the command, as it is, to the FW. When FW replies with a success response, we let the cached values in driver take effect. > > +static void nxp_send_ack(u8 ack, struct hci_dev *hdev) { > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > + u8 ack_nak[2]; > > + > > + if (ack == NXP_ACK_V1 || ack == NXP_NAK_V1) { > > + ack_nak[0] = ack; > > + serdev_device_write_buf(nxpdev->serdev, ack_nak, 1); > > + } else if (ack == NXP_ACK_V3) { > > + ack_nak[0] = ack; > > + ack_nak[1] = crc8(crc8_table, ack_nak, 1, 0xff); > > + serdev_device_write_buf(nxpdev->serdev, ack_nak, 2); > > + } > > This could be done as: > > int len = 1; > > ack_nak[0] = ack; > if (ack == NXP_ACK_V3) { > len = 2; > ack_nak[1] = crc8(crc8_table, ack_nak, 1, 0xff); > } > serdev_device_write_buf(nxpdev->serdev, ack_nak, len); > > or calculate the len with NXP_ACK_V3 ? 2 : 1 on the func call line. I have replaced this code with what you initially suggested here. > > + > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 req_len) > > +{ > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > + struct nxp_bootloader_cmd nxp_cmd5; > > + struct uart_config uart_config; > > + > > + if (req_len == sizeof(nxp_cmd5)) { > > + nxp_cmd5.header = __cpu_to_le32(5); > > + nxp_cmd5.arg = 0; > > + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); > > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > > + sizeof(nxp_cmd5) - 4)); > > swab32(crc32_be(...)) seems and odd construct instead of __cpu_to_le32(). Earlier I had tried using __cpu_to_le32() but that did not work. The FW expects a swapped CRC value for it's header and payload data. > > > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, > > + req_len); > > Is it safe to assume req_len is small enough to not leak stack content? The chip requests chunk of FW data which is never more than 2048 bytes at a time. > > > +static bool nxp_check_boot_sign(struct btnxpuart_dev *nxpdev) { > > + int ret; > > + > > + serdev_device_set_baudrate(nxpdev->serdev, > HCI_NXP_PRI_BAUDRATE); > > + serdev_device_set_flow_control(nxpdev->serdev, 0); > > + set_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > > + > > + ret = wait_event_interruptible_timeout(nxpdev- > >check_boot_sign_wait_q, > > + !test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, > > + &nxpdev->tx_state), > > + msecs_to_jiffies(1000)); > > + if (ret == 0) > > + return false; > > + else > > + return true; > > How does does this handle -ERESTARTSYS? But this runs in nxp_setup() so is > that even relevant (I don't know). This function is waits for 1 second and checks if it is receiving any bootloader signatures over UART. If yes, it means FW download is needed. If no, it means FW is already present on the chip, and we skip FW download. > > +static int nxp_enqueue(struct hci_dev *hdev, struct sk_buff *skb) { > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > + struct ps_data *psdata = nxpdev->psdata; > > + struct hci_command_hdr *hdr; > > + u8 param[MAX_USER_PARAMS]; > > + > > + if (!nxpdev || !psdata) > > + goto free_skb; > > + > > + /* if vendor commands are received from user space (e.g. hcitool), > update > > + * driver flags accordingly and ask driver to re-send the command to > FW. > > + */ > > + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT && > > + !psdata->driver_sent_cmd) { > > Should this !psdata->driver_sent_cmd do something else than end up into a > place labelled send_skb. Maybe return early (or free skb + return)? > There's a comment elsewhere stating: "set flag to prevent re-sending > command in nxp_enqueue." I'm sorry if the comment was misleading. This flag is set to prevent nxp_enqueue() from Parsing the command parameters again, and calling hci_cmd_sync_queue() again. The commands sent from user space, as well as the commands sent by __hci_cmd_sync(), both endup in nxp_enqueue(). Hope this helps! > > > + if (!skb->len || skb->len > (MAX_USER_PARAMS + > HCI_COMMAND_HDR_SIZE)) > > + goto send_skb; > > + > > + hdr = (struct hci_command_hdr *)skb->data; > > + if (hdr->plen != (skb->len - HCI_COMMAND_HDR_SIZE)) > > + goto send_skb; > > Are these two gotos happily sending invalid skbs? As mentioned earlier, in nxp_enqueue, we simply want to catch few vendor command parameters and cache them till the FW replies with a success/failure, and forward those commands to the FW as is. Incase there are any invalid skbs, the FW will send an error response to the user space program. Freeing any skbs in driver will result in user space tools like hcitool to wait indefinitely for a response. > > > + memcpy(param, skb->data + HCI_COMMAND_HDR_SIZE, hdr- > >plen); > > + switch (__le16_to_cpu(hdr->opcode)) { > > + case HCI_NXP_AUTO_SLEEP_MODE: > > + if (hdr->plen >= 1) { > > + if (param[0] == BT_PS_ENABLE) > > + psdata->ps_mode = PS_MODE_ENABLE; > > + else if (param[0] == BT_PS_DISABLE) > > + psdata->ps_mode = PS_MODE_DISABLE; > > + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); > > + goto free_skb; > > + } > > + break; > > + case HCI_NXP_WAKEUP_METHOD: > > + if (hdr->plen >= 4) { > > + psdata->c2h_wakeupmode = param[0]; > > + psdata->c2h_wakeup_gpio = param[1]; > > + switch (param[2]) { > > + case BT_CTRL_WAKEUP_METHOD_DSR: > > + psdata->h2c_wakeupmode = WAKEUP_METHOD_DTR; > > + break; > > + case BT_CTRL_WAKEUP_METHOD_BREAK: > > + default: > > + psdata->h2c_wakeupmode = > WAKEUP_METHOD_BREAK; > > + break; > > + } > > + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, > NULL, NULL); > > + goto free_skb; > > + } > > + break; > > + case HCI_NXP_SET_OPER_SPEED: > > + if (hdr->plen == 4) { > > + nxpdev->new_baudrate = *((u32 *)param); > > + hci_cmd_sync_queue(hdev, nxp_set_baudrate_cmd, NULL, > NULL); > > + goto free_skb; > > + } > > + break; > > + case HCI_NXP_IND_RESET: > > + if (hdr->plen == 1) { > > + hci_cmd_sync_queue(hdev, nxp_set_ind_reset, NULL, > NULL); > > + goto free_skb; > > + } > > + break; > > + default: > > + break; > > Okay to end up into place labelled send_skb? Yes, other vendor commands can be send directly to the chip, as we do not need to cache any info from them. > > + > > + if (hci_register_dev(hdev) < 0) { > > + dev_err(&serdev->dev, "Can't register HCI device\n"); > > + hci_free_dev(hdev); > > + return -ENODEV; > > + } > > + > > + if (!ps_init_work(hdev)) > > + ps_init_timer(hdev); > > Eh, shouldn't this fail the probe on error? > > But then, why is psdata not embedded into btnxpuart_dev but separately > allocated? Initially I planned to keep psdata as a separate data structure, and handle it using ps_* functions. This was to keep the btnxpuart_dev from getting too complex. Anyways I have now embedded a psdata data structure inside btnxpuart_dev. > > > + crc8_populate_msb(crc8_table, POLYNOMIAL8); > > Is it okay to populate after HCI device is registered? Moved this and a couple of other function calls before registering HCI device. > -- > i. Please let me know if you have any concerns or further review comments. Thank you, Neeraj
On Mon, 6 Mar 2023, Neeraj sanjay kale wrote: > Hi Ilpo, > > Thank you for reviewing this patch. I have resolved most of your review comments in v7 patch, and I have some clarification inline below: Further discussion below + I sent a few against v7. > > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 req_len) > > > +{ > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > + struct nxp_bootloader_cmd nxp_cmd5; > > > + struct uart_config uart_config; > > > + > > > + if (req_len == sizeof(nxp_cmd5)) { > > > + nxp_cmd5.header = __cpu_to_le32(5); > > > + nxp_cmd5.arg = 0; > > > + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); > > > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > > > + sizeof(nxp_cmd5) - 4)); > > > > swab32(crc32_be(...)) seems and odd construct instead of __cpu_to_le32(). > Earlier I had tried using __cpu_to_le32() but that did not work. The FW expects a swapped > CRC value for it's header and payload data. So the .crc member should be __be32 then? > > > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, > > > + req_len); > > > > Is it safe to assume req_len is small enough to not leak stack content? > The chip requests chunk of FW data which is never more than 2048 bytes > at a time. Eh, sizeof(*nxp_cmd7) is 16 bytes!?! Are you sure that req_len given to serdev_device_write_buf() is not larger than 16 bytes? > > > +static bool nxp_check_boot_sign(struct btnxpuart_dev *nxpdev) { > > > + int ret; > > > + > > > + serdev_device_set_baudrate(nxpdev->serdev, > > HCI_NXP_PRI_BAUDRATE); > > > + serdev_device_set_flow_control(nxpdev->serdev, 0); > > > + set_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > > > + > > > + ret = wait_event_interruptible_timeout(nxpdev- > > >check_boot_sign_wait_q, > > > + !test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, > > > + &nxpdev->tx_state), > > > + msecs_to_jiffies(1000)); > > > + if (ret == 0) > > > + return false; > > > + else > > > + return true; > > > > How does does this handle -ERESTARTSYS? But this runs in nxp_setup() so is > > that even relevant (I don't know). > This function is waits for 1 second and checks if it is receiving any bootloader signatures > over UART. If yes, it means FW download is needed. If no, it means FW is already present > on the chip, and we skip FW download. Okay, it seems your changes had a side-effect of addressing this. > > > +static int nxp_enqueue(struct hci_dev *hdev, struct sk_buff *skb) { > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > + struct ps_data *psdata = nxpdev->psdata; > > > + struct hci_command_hdr *hdr; > > > + u8 param[MAX_USER_PARAMS]; > > > + > > > + if (!nxpdev || !psdata) > > > + goto free_skb; > > > + > > > + /* if vendor commands are received from user space (e.g. hcitool), > > update > > > + * driver flags accordingly and ask driver to re-send the command to > > FW. > > > + */ > > > + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT && > > > + !psdata->driver_sent_cmd) { > > > > Should this !psdata->driver_sent_cmd do something else than end up into a > > place labelled send_skb. Maybe return early (or free skb + return)? > > There's a comment elsewhere stating: "set flag to prevent re-sending > > command in nxp_enqueue." > I'm sorry if the comment was misleading. This flag is set to prevent nxp_enqueue() from > Parsing the command parameters again, and calling hci_cmd_sync_queue() again. > The commands sent from user space, as well as the commands sent by __hci_cmd_sync(), > both endup in nxp_enqueue(). > Hope this helps! Okay, makes sense now and the logic is also clearer now. However, the brace blocks you added into those cases in bxp_enqueue() you should try to remove. I realize you do it to avoid name collisions because you reused param in each but they introduced these ugly constructs: case XX: { ... goto free_skb; } break;
Hi Francesco, Thank you for your review comments and sorry for the delay. > > > +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" > > +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" > > +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" > > +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" > > +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" > > Where are this files coming from? Where can I download those? > Is loading a combo firmware from the mwifiex driver supported? We are working on submitting these files to linux-firmware. They will be available under nxp/ directory once merged. > > > +#define HCI_NXP_PRI_BAUDRATE 115200 > > +#define HCI_NXP_SEC_BAUDRATE 3000000 > > What if the UART device does not support 3000000 baudrate (think at > limitation on the clock source/divider of the UART)? Shouldn't this be > configurable? We have noted this requirement and decided to design and implement on this in upcoming patches along with other new features. We have a number of customers out there who have been using these chips as well as the legacy Marvell chips, which need FW download at 3000000 baudrate, and so far there were no issues reported. Using a lower standard baudrate affects the time it takes to download the FW, which we are trying to keep strictly under 5 seconds. > > > +#define NXP_V1_FW_REQ_PKT 0xa5 > > +#define NXP_V1_CHIP_VER_PKT 0xaa > > +#define NXP_V3_FW_REQ_PKT 0xa7 > > +#define NXP_V3_CHIP_VER_PKT 0xab > > + > > +#define NXP_ACK_V1 0x5a > > +#define NXP_NAK_V1 0xbf > > +#define NXP_ACK_V3 0x7a > > +#define NXP_NAK_V3 0x7b > > +#define NXP_CRC_ERROR_V3 0x7c > > I assume this was already discussed, but the *_V1 looks just like the existing > Marvell protocol, is it really worth a new driver? I did not check all the details > here, so maybe the answer is just yes. > The 88w8897 was a legacy Marvell chipset, while the newer chipsets we are trying to add here are branded under "NXP". Most of the newer chipset download FW using V3 protocol and few of them use V1 protocol, which is still different from the V1 protocol seen for 8897 chip. Initially we tried to add support for NXP chipsets in hci line-discipline, but Marcel Holtmann advised us to implement this standalone driver based on serdev. Hope this helps! Thanks, Neeraj
On Fri, Mar 10, 2023 at 12:09:09PM +0000, Neeraj sanjay kale wrote: > > > +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" > > > +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" > > > +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" > > > +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" > > > +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" > > > > Where are this files coming from? Where can I download those? > > Is loading a combo firmware from the mwifiex driver supported? > We are working on submitting these files to linux-firmware. They will > be available under nxp/ directory once merged. What about the combo firmware that would be downloaded by mwifiex driver? How is this supposed to interact with it? > > > +#define HCI_NXP_PRI_BAUDRATE 115200 > > > +#define HCI_NXP_SEC_BAUDRATE 3000000 > > What if the UART device does not support 3000000 baudrate (think at > > limitation on the clock source/divider of the UART)? Shouldn't this be > > configurable? > We have noted this requirement and decided to design and implement on > this in upcoming patches along with other new features. We have a > number of customers out there who have been using these chips as well > as the legacy Marvell chips, which need FW download at 3000000 > baudrate, and so far there were no issues reported. Using a lower > standard baudrate affects the time it takes to download the FW, which > we are trying to keep strictly under 5 seconds. ok, just for you to know our hardware, using NXP SoC, will not work with this baudrate (no way to have it given the clock tree we have). > Hope this helps! Yes, thanks! Francesco
Hi Francesco > > On Fri, Mar 10, 2023 at 12:09:09PM +0000, Neeraj sanjay kale wrote: > > > > +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" > > > > +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" > > > > +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" > > > > +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" > > > > +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" > > > > > > Where are this files coming from? Where can I download those? > > > Is loading a combo firmware from the mwifiex driver supported? > > We are working on submitting these files to linux-firmware. They will > > be available under nxp/ directory once merged. > > What about the combo firmware that would be downloaded by mwifiex > driver? How is this supposed to interact with it? If combo firmware is loaded by the mwifiex, then this driver would not detect any bootloader signatures, and would skip FW downloading and move on. Please check the nxp_setup() function. > > > > > +#define HCI_NXP_PRI_BAUDRATE 115200 #define > HCI_NXP_SEC_BAUDRATE > > > > +3000000 > > > What if the UART device does not support 3000000 baudrate (think at > > > limitation on the clock source/divider of the UART)? Shouldn't this > > > be configurable? > > We have noted this requirement and decided to design and implement on > > this in upcoming patches along with other new features. We have a > > number of customers out there who have been using these chips as well > > as the legacy Marvell chips, which need FW download at 3000000 > > baudrate, and so far there were no issues reported. Using a lower > > standard baudrate affects the time it takes to download the FW, which > > we are trying to keep strictly under 5 seconds. > > ok, just for you to know our hardware, using NXP SoC, will not work with this > baudrate (no way to have it given the clock tree we have). Got it! We will work on this requirement for sure and come up with something soon in the next patch for this driver. FYI, firmware download takes around 20 seconds at 115200 baudrate, which is highly unacceptable by many customers. 😊 Thanks, Neeraj
Hi Ilpo, I have resolved most of your comments in v8 patch, and I have few things to discuss regarding the v6 patch. > > > > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 > > > > +req_len) { > > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > > + struct nxp_bootloader_cmd nxp_cmd5; > > > > + struct uart_config uart_config; > > > > + > > > > + if (req_len == sizeof(nxp_cmd5)) { > > > > + nxp_cmd5.header = __cpu_to_le32(5); > > > > + nxp_cmd5.arg = 0; > > > > + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); > > > > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > > > > + sizeof(nxp_cmd5) - > > > > + 4)); > > > > > > swab32(crc32_be(...)) seems and odd construct instead of > __cpu_to_le32(). > > Earlier I had tried using __cpu_to_le32() but that did not work. The > > FW expects a swapped CRC value for it's header and payload data. > > So the .crc member should be __be32 then? > I disagree with using __be32. I have simplified this part of the code in v8 patch, please do check it out. So the CRC part of the data structure will remain __le32, and will be sent over UART to the chip in Little Endian format. It's just that the FW expects the CRC to be byte-swapped. Technically it is big endian format, but you may think of it as a "+1 level" of encryption (although it isn't). So defining this structure member as __be32 can create more questions than answers, leading to more confusion. If it helps, I have also added a small comment in there to signify that the FW expects CRC in byte swapped method. > > > > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, > > > > + req_len); > > > > > > Is it safe to assume req_len is small enough to not leak stack content? > > The chip requests chunk of FW data which is never more than 2048 bytes > > at a time. > > Eh, sizeof(*nxp_cmd7) is 16 bytes!?! Are you sure that req_len given to > serdev_device_write_buf() is not larger than 16 bytes? > I have now replaced req_len with sizeof(<struct>). There is also a check in the beginning of the function to return if req_len is not 16 bytes. > > > > +static bool nxp_check_boot_sign(struct btnxpuart_dev *nxpdev) { > > > > + int ret; > > > > + > > > > + serdev_device_set_baudrate(nxpdev->serdev, > > > HCI_NXP_PRI_BAUDRATE); > > > > + serdev_device_set_flow_control(nxpdev->serdev, 0); > > > > + set_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); > > > > + > > > > + ret = wait_event_interruptible_timeout(nxpdev- > > > >check_boot_sign_wait_q, > > > > > + !test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, > > > > + &nxpdev->tx_state), > > > > + msecs_to_jiffies(1000)); > > > > + if (ret == 0) > > > > + return false; > > > > + else > > > > + return true; > > > > > > How does does this handle -ERESTARTSYS? But this runs in nxp_setup() > > > so is that even relevant (I don't know). > > This function is waits for 1 second and checks if it is receiving any > > bootloader signatures over UART. If yes, it means FW download is > > needed. If no, it means FW is already present on the chip, and we skip FW > download. > > Okay, it seems your changes had a side-effect of addressing this. > > > > > +static int nxp_enqueue(struct hci_dev *hdev, struct sk_buff *skb) { > > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > > + struct ps_data *psdata = nxpdev->psdata; > > > > + struct hci_command_hdr *hdr; > > > > + u8 param[MAX_USER_PARAMS]; > > > > + > > > > + if (!nxpdev || !psdata) > > > > + goto free_skb; > > > > + > > > > + /* if vendor commands are received from user space (e.g. > > > > + hcitool), > > > update > > > > + * driver flags accordingly and ask driver to re-send the > > > > + command to > > > FW. > > > > + */ > > > > + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT && > > > > + !psdata->driver_sent_cmd) { > > > > > > Should this !psdata->driver_sent_cmd do something else than end up > > > into a place labelled send_skb. Maybe return early (or free skb + return)? > > > There's a comment elsewhere stating: "set flag to prevent re-sending > > > command in nxp_enqueue." > > I'm sorry if the comment was misleading. This flag is set to prevent > > nxp_enqueue() from Parsing the command parameters again, and calling > hci_cmd_sync_queue() again. > > The commands sent from user space, as well as the commands sent by > > __hci_cmd_sync(), both endup in nxp_enqueue(). > > Hope this helps! > > Okay, makes sense now and the logic is also clearer now. However, the brace > blocks you added into those cases in bxp_enqueue() you should try to > remove. I realize you do it to avoid name collisions because you reused > param in each but they introduced these ugly constructs: > case XX: > { > ... > goto free_skb; > } > break; > Modified in v8. Thanks again for the review comments! Neeraj.
On Fri, 10 Mar 2023, Neeraj sanjay kale wrote: > Hi Ilpo, > > I have resolved most of your comments in v8 patch, and I have few things to discuss regarding the v6 patch. > > > > > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 > > > > > +req_len) { > > > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > > > + struct nxp_bootloader_cmd nxp_cmd5; > > > > > + struct uart_config uart_config; > > > > > + > > > > > + if (req_len == sizeof(nxp_cmd5)) { > > > > > + nxp_cmd5.header = __cpu_to_le32(5); > > > > > + nxp_cmd5.arg = 0; > > > > > + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); > > > > > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > > > > > + sizeof(nxp_cmd5) - > > > > > + 4)); > > > > > > > > swab32(crc32_be(...)) seems and odd construct instead of > > __cpu_to_le32(). > > > Earlier I had tried using __cpu_to_le32() but that did not work. The > > > FW expects a swapped CRC value for it's header and payload data. > > > > So the .crc member should be __be32 then? > > > I disagree with using __be32. > I have simplified this part of the code in v8 patch, please do check it out. > So the CRC part of the data structure will remain __le32, and will be sent over UART to the chip in Little Endian format. > It's just that the FW expects the CRC to be byte-swapped. > Technically it is big endian format, but you may think of it as a "+1 level" of encryption (although it isn't). > So defining this structure member as __be32 can create more questions > than answers, leading to more confusion. > If it helps, I have also added a small comment in there to signify that > the FW expects CRC in byte swapped method. I'd have still put the member as __be32 and commented the swap expectation there. But it's not an end of the world even in the current form. > > > > > + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, > > > > > + req_len); > > > > > > > > Is it safe to assume req_len is small enough to not leak stack content? > > > The chip requests chunk of FW data which is never more than 2048 bytes > > > at a time. > > > > Eh, sizeof(*nxp_cmd7) is 16 bytes!?! Are you sure that req_len given to > > serdev_device_write_buf() is not larger than 16 bytes? > > > I have now replaced req_len with sizeof(<struct>). > There is also a check in the beginning of the function to return if req_len is not 16 bytes. Ah, I'd missed that check for some reason.
Hi Ilpo > > On Fri, 10 Mar 2023, Neeraj sanjay kale wrote: > > > Hi Ilpo, > > > > I have resolved most of your comments in v8 patch, and I have few things > to discuss regarding the v6 patch. > > > > > > > > +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 > > > > > > +req_len) { > > > > > > + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); > > > > > > + struct nxp_bootloader_cmd nxp_cmd5; > > > > > > + struct uart_config uart_config; > > > > > > + > > > > > > + if (req_len == sizeof(nxp_cmd5)) { > > > > > > + nxp_cmd5.header = __cpu_to_le32(5); > > > > > > + nxp_cmd5.arg = 0; > > > > > > + nxp_cmd5.payload_len = > __cpu_to_le32(sizeof(uart_config)); > > > > > > + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, > > > > > > + sizeof(nxp_cmd5) > > > > > > + - 4)); > > > > > > > > > > swab32(crc32_be(...)) seems and odd construct instead of > > > __cpu_to_le32(). > > > > Earlier I had tried using __cpu_to_le32() but that did not work. > > > > The FW expects a swapped CRC value for it's header and payload data. > > > > > > So the .crc member should be __be32 then? > > > > > I disagree with using __be32. > > I have simplified this part of the code in v8 patch, please do check it out. > > So the CRC part of the data structure will remain __le32, and will be sent > over UART to the chip in Little Endian format. > > It's just that the FW expects the CRC to be byte-swapped. > > Technically it is big endian format, but you may think of it as a "+1 level" of > encryption (although it isn't). > > So defining this structure member as __be32 can create more questions > > than answers, leading to more confusion. > > If it helps, I have also added a small comment in there to signify > > that the FW expects CRC in byte swapped method. > > I'd have still put the member as __be32 and commented the swap > expectation there. But it's not an end of the world even in the current form. This sounds okay to me. I have changed the CRC datatype to __be32 and kept the comment. Thanks, Neeraj
diff --git a/MAINTAINERS b/MAINTAINERS index 030ec6fe89df..fdb9b0788c89 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22840,6 +22840,7 @@ M: Amitkumar Karwar <amitkumar.karwar@nxp.com> M: Neeraj Kale <neeraj.sanjaykale@nxp.com> S: Maintained F: Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +F: drivers/bluetooth/btnxpuart.c THE REST M: Linus Torvalds <torvalds@linux-foundation.org> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 5a1a7bec3c42..359a4833e31f 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -465,4 +465,15 @@ config BT_VIRTIO Say Y here to compile support for HCI over Virtio into the kernel or say M to compile as a module. +config BT_NXPUART + tristate "NXP protocol support" + depends on SERIAL_DEV_BUS + help + NXP is serial driver required for NXP Bluetooth + devices with UART interface. + + Say Y here to compile support for NXP Bluetooth UART device into + the kernel, or say M here to compile as a module (btnxpuart). + + endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index e0b261f24fc9..7a5967e9ac48 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_BT_QCA) += btqca.o obj-$(CONFIG_BT_MTK) += btmtk.o obj-$(CONFIG_BT_VIRTIO) += virtio_bt.o +obj-$(CONFIG_BT_NXPUART) += btnxpuart.o obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c new file mode 100644 index 000000000000..f581e05ddecb --- /dev/null +++ b/drivers/bluetooth/btnxpuart.c @@ -0,0 +1,1317 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * NXP Bluetooth driver + * Copyright 2018-2023 NXP + */ + +#include <linux/module.h> +#include <linux/kernel.h> + +#include <linux/serdev.h> +#include <linux/of.h> +#include <linux/skbuff.h> +#include <asm/unaligned.h> +#include <linux/firmware.h> +#include <linux/string.h> +#include <linux/crc8.h> +#include <linux/crc32.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "h4_recv.h" + +#define MANUFACTURER_NXP 37 + +#define BTNXPUART_TX_STATE_ACTIVE 1 +#define BTNXPUART_FW_DOWNLOADING 2 +#define BTNXPUART_CHECK_BOOT_SIGNATURE 3 + +#define FIRMWARE_W8987 "nxp/uartuart8987_bt.bin" +#define FIRMWARE_W8997 "nxp/uartuart8997_bt_v4.bin" +#define FIRMWARE_W9098 "nxp/uartuart9098_bt_v1.bin" +#define FIRMWARE_IW416 "nxp/uartiw416_bt_v0.bin" +#define FIRMWARE_IW612 "nxp/uartspi_n61x_v1.bin.se" + +#define CHIP_ID_W9098 0x5c03 +#define CHIP_ID_IW416 0x7201 +#define CHIP_ID_IW612 0x7601 + +#define HCI_NXP_PRI_BAUDRATE 115200 +#define HCI_NXP_SEC_BAUDRATE 3000000 + +#define MAX_FW_FILE_NAME_LEN 50 + +/* Default ps timeout period in milli-second */ +#define PS_DEFAULT_TIMEOUT_PERIOD 2000 + +/* wakeup methods */ +#define WAKEUP_METHOD_DTR 0 +#define WAKEUP_METHOD_BREAK 1 +#define WAKEUP_METHOD_EXT_BREAK 2 +#define WAKEUP_METHOD_RTS 3 +#define WAKEUP_METHOD_INVALID 0xff + +/* power save mode status */ +#define PS_MODE_DISABLE 0 +#define PS_MODE_ENABLE 1 + +/* Power Save Commands to ps_work_func */ +#define PS_CMD_EXIT_PS 1 +#define PS_CMD_ENTER_PS 2 + +/* power save state */ +#define PS_STATE_AWAKE 0 +#define PS_STATE_SLEEP 1 + +/* Bluetooth vendor command : Sleep mode */ +#define HCI_NXP_AUTO_SLEEP_MODE 0xfc23 +/* Bluetooth vendor command : Wakeup method */ +#define HCI_NXP_WAKEUP_METHOD 0xfc53 +/* Bluetooth vendor command : Set operational baudrate */ +#define HCI_NXP_SET_OPER_SPEED 0xfc09 +/* Bluetooth vendor command: Independent Reset */ +#define HCI_NXP_IND_RESET 0xfcfc + +/* Bluetooth Power State : Vendor cmd params */ +#define BT_PS_ENABLE 0x02 +#define BT_PS_DISABLE 0x03 + +/* Bluetooth Host Wakeup Methods */ +#define BT_HOST_WAKEUP_METHOD_NONE 0x00 +#define BT_HOST_WAKEUP_METHOD_DTR 0x01 +#define BT_HOST_WAKEUP_METHOD_BREAK 0x02 +#define BT_HOST_WAKEUP_METHOD_GPIO 0x03 + +/* Bluetooth Chip Wakeup Methods */ +#define BT_CTRL_WAKEUP_METHOD_DSR 0x00 +#define BT_CTRL_WAKEUP_METHOD_BREAK 0x01 +#define BT_CTRL_WAKEUP_METHOD_GPIO 0x02 +#define BT_CTRL_WAKEUP_METHOD_EXT_BREAK 0x04 +#define BT_CTRL_WAKEUP_METHOD_RTS 0x05 + +#define MAX_USER_PARAMS 10 + +struct ps_data { + u8 ps_mode; + u8 cur_psmode; + u8 ps_state; + u8 ps_cmd; + u8 h2c_wakeupmode; + u8 cur_h2c_wakeupmode; + u8 c2h_wakeupmode; + u8 c2h_wakeup_gpio; + bool driver_sent_cmd; + bool timer_on; + u32 interval; + struct hci_dev *hdev; + struct work_struct work; + struct timer_list ps_timer; +}; + +struct btnxpuart_data { + bool fw_dnld_use_high_baudrate; + const u8 *fw_name; +}; + +struct btnxpuart_dev { + struct hci_dev *hdev; + struct serdev_device *serdev; + + struct work_struct tx_work; + unsigned long tx_state; + struct sk_buff_head txq; + struct sk_buff *rx_skb; + + const struct firmware *fw; + u8 fw_name[MAX_FW_FILE_NAME_LEN]; + u32 fw_dnld_v1_offset; + u32 fw_v1_sent_bytes; + u32 fw_v3_offset_correction; + u32 fw_v1_expected_len; + wait_queue_head_t fw_dnld_done_wait_q; + wait_queue_head_t check_boot_sign_wait_q; + + u32 new_baudrate; + u32 current_baudrate; + u32 fw_init_baudrate; + bool timeout_changed; + bool baudrate_changed; + + struct ps_data *psdata; + struct btnxpuart_data *nxp_data; +}; + +#define NXP_V1_FW_REQ_PKT 0xa5 +#define NXP_V1_CHIP_VER_PKT 0xaa +#define NXP_V3_FW_REQ_PKT 0xa7 +#define NXP_V3_CHIP_VER_PKT 0xab + +#define NXP_ACK_V1 0x5a +#define NXP_NAK_V1 0xbf +#define NXP_ACK_V3 0x7a +#define NXP_NAK_V3 0x7b +#define NXP_CRC_ERROR_V3 0x7c + +#define HDR_LEN 16 + +#define NXP_RECV_FW_REQ_V1 \ + .type = NXP_V1_FW_REQ_PKT, \ + .hlen = 4, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = 4 + +#define NXP_RECV_CHIP_VER_V3 \ + .type = NXP_V3_CHIP_VER_PKT, \ + .hlen = 4, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = 4 + +#define NXP_RECV_FW_REQ_V3 \ + .type = NXP_V3_FW_REQ_PKT, \ + .hlen = 9, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = 9 + +struct v1_data_req { + __le16 len; + __le16 len_comp; +} __packed; + +struct v3_data_req { + __le16 len; + __le32 offset; + __le16 error; + u8 crc; +} __packed; + +struct v3_start_ind { + __le16 chip_id; + u8 loader_ver; + u8 crc; +} __packed; + +/* UART register addresses of BT chip */ +#define CLKDIVADDR 0x7f00008f +#define UARTDIVADDR 0x7f000090 +#define UARTMCRADDR 0x7f000091 +#define UARTREINITADDR 0x7f000092 +#define UARTICRADDR 0x7f000093 +#define UARTFCRADDR 0x7f000094 + +#define MCR 0x00000022 +#define INIT 0x00000001 +#define ICR 0x000000c7 +#define FCR 0x000000c7 + +#define POLYNOMIAL8 0x07 +#define POLYNOMIAL32 0x04c11db7L + +struct uart_reg { + __le32 address; + __le32 value; +} __packed; + +struct uart_config { + struct uart_reg clkdiv; + struct uart_reg uartdiv; + struct uart_reg mcr; + struct uart_reg re_init; + struct uart_reg icr; + struct uart_reg fcr; + __le32 crc; +} __packed; + +struct nxp_bootloader_cmd { + __le32 header; + __le32 arg; + __le32 payload_len; + __le32 crc; +} __packed; + +static u8 crc8_table[CRC8_TABLE_SIZE]; + +/* Default Power Save configuration */ +#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK +#define DEFAULT_PS_MODE PS_MODE_ENABLE + +#define FW_INIT_BAUDRATE 115200 + +static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode, + u32 plen, + void *param) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + struct sk_buff *skb; + + psdata->driver_sent_cmd = true; /* set flag to prevent re-sending command in nxp_enqueue */ + skb = __hci_cmd_sync(hdev, opcode, plen, param, HCI_CMD_TIMEOUT); + psdata->driver_sent_cmd = false; + + return skb; +} + +static void btnxpuart_tx_wakeup(struct btnxpuart_dev *nxpdev) +{ + if (schedule_work(&nxpdev->tx_work)) + set_bit(BTNXPUART_TX_STATE_ACTIVE, &nxpdev->tx_state); +} + +/* NXP Power Save Feature */ +static void ps_start_timer(struct btnxpuart_dev *nxpdev) +{ + struct ps_data *psdata = nxpdev->psdata; + + if (!psdata) + return; + + if (psdata->cur_psmode == PS_MODE_ENABLE) { + psdata->timer_on = true; + mod_timer(&psdata->ps_timer, jiffies + msecs_to_jiffies(psdata->interval)); + } +} + +static void ps_cancel_timer(struct btnxpuart_dev *nxpdev) +{ + struct ps_data *psdata = nxpdev->psdata; + + flush_work(&psdata->work); + if (psdata->timer_on) + del_timer_sync(&psdata->ps_timer); +} + +static void ps_control(struct hci_dev *hdev, u8 ps_state) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + int status; + + if (psdata->ps_state == ps_state) + return; + + switch (psdata->cur_h2c_wakeupmode) { + case WAKEUP_METHOD_DTR: + if (ps_state == PS_STATE_AWAKE) + serdev_device_set_tiocm(nxpdev->serdev, TIOCM_DTR, 0); + else + serdev_device_set_tiocm(nxpdev->serdev, 0, TIOCM_DTR); + break; + case WAKEUP_METHOD_BREAK: + default: + if (ps_state == PS_STATE_AWAKE) + status = serdev_device_break_ctl(nxpdev->serdev, 0); + else + status = serdev_device_break_ctl(nxpdev->serdev, -1); + bt_dev_dbg(hdev, "Set UART break: %s, status=%d", + ps_state == PS_STATE_AWAKE ? "off" : "on", status); + break; + } + psdata->ps_state = ps_state; + if (ps_state == PS_STATE_AWAKE) + btnxpuart_tx_wakeup(nxpdev); +} + +static void ps_work_func(struct work_struct *work) +{ + struct ps_data *data = container_of(work, struct ps_data, work); + + if (data->ps_cmd == PS_CMD_ENTER_PS && data->cur_psmode == PS_MODE_ENABLE) + ps_control(data->hdev, PS_STATE_SLEEP); + else if (data->ps_cmd == PS_CMD_EXIT_PS) + ps_control(data->hdev, PS_STATE_AWAKE); +} + +static void ps_timeout_func(struct timer_list *t) +{ + struct ps_data *data = from_timer(data, t, ps_timer); + struct hci_dev *hdev = data->hdev; + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + + data->timer_on = false; + if (test_bit(BTNXPUART_TX_STATE_ACTIVE, &nxpdev->tx_state)) { + ps_start_timer(nxpdev); + } else { + data->ps_cmd = PS_CMD_ENTER_PS; + schedule_work(&data->work); + } +} + +static int ps_init_work(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata; + + psdata = kzalloc(sizeof(*psdata), GFP_KERNEL); + if (!psdata) + return -ENOMEM; + + nxpdev->psdata = psdata; + + psdata->interval = PS_DEFAULT_TIMEOUT_PERIOD; + psdata->ps_state = PS_STATE_AWAKE; + psdata->ps_mode = DEFAULT_PS_MODE; + psdata->hdev = hdev; + psdata->c2h_wakeupmode = BT_HOST_WAKEUP_METHOD_NONE; + psdata->c2h_wakeup_gpio = 0xff; + + switch (DEFAULT_H2C_WAKEUP_MODE) { + case WAKEUP_METHOD_DTR: + psdata->h2c_wakeupmode = WAKEUP_METHOD_DTR; + break; + case WAKEUP_METHOD_BREAK: + default: + psdata->h2c_wakeupmode = WAKEUP_METHOD_BREAK; + break; + } + psdata->cur_psmode = PS_MODE_DISABLE; + psdata->cur_h2c_wakeupmode = WAKEUP_METHOD_INVALID; + INIT_WORK(&psdata->work, ps_work_func); + + return 0; +} + +static void ps_init_timer(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + + psdata->timer_on = false; + timer_setup(&psdata->ps_timer, ps_timeout_func, 0); +} + +static void ps_wakeup(struct btnxpuart_dev *nxpdev) +{ + struct ps_data *psdata = nxpdev->psdata; + + if (psdata->ps_state != PS_STATE_AWAKE) { + psdata->ps_cmd = PS_CMD_EXIT_PS; + schedule_work(&psdata->work); + } +} + +static int send_ps_cmd(struct hci_dev *hdev, void *data) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + u8 pcmd; + struct sk_buff *skb; + u8 *status; + + if (psdata->ps_mode == PS_MODE_ENABLE) + pcmd = BT_PS_ENABLE; + else + pcmd = BT_PS_DISABLE; + + skb = nxp_drv_send_cmd(hdev, HCI_NXP_AUTO_SLEEP_MODE, 1, &pcmd); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting Power Save mode failed (%ld)", PTR_ERR(skb)); + return PTR_ERR(skb); + } + + status = skb_pull_data(skb, 1); + if (status) { + if (!*status) + psdata->cur_psmode = psdata->ps_mode; + else + psdata->ps_mode = psdata->cur_psmode; + if (psdata->cur_psmode == PS_MODE_ENABLE) + ps_start_timer(nxpdev); + else + ps_wakeup(nxpdev); + bt_dev_dbg(hdev, "Power Save mode response: status=%d, ps_mode=%d", + *status, psdata->cur_psmode); + } + kfree_skb(skb); + + return 0; +} + +static int send_wakeup_method_cmd(struct hci_dev *hdev, void *data) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + u8 pcmd[4]; + struct sk_buff *skb; + u8 *status; + + pcmd[0] = psdata->c2h_wakeupmode; + pcmd[1] = psdata->c2h_wakeup_gpio; + switch (psdata->h2c_wakeupmode) { + case WAKEUP_METHOD_DTR: + pcmd[2] = BT_CTRL_WAKEUP_METHOD_DSR; + break; + case WAKEUP_METHOD_BREAK: + default: + pcmd[2] = BT_CTRL_WAKEUP_METHOD_BREAK; + break; + } + pcmd[3] = 0xff; + + skb = nxp_drv_send_cmd(hdev, HCI_NXP_WAKEUP_METHOD, 4, pcmd); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting wake-up method failed (%ld)", PTR_ERR(skb)); + return PTR_ERR(skb); + } + + status = skb_pull_data(skb, 1); + if (status) { + if (*status == 0) + psdata->cur_h2c_wakeupmode = psdata->h2c_wakeupmode; + else + psdata->h2c_wakeupmode = psdata->cur_h2c_wakeupmode; + bt_dev_dbg(hdev, "Set Wakeup Method response: status=%d, h2c_wakeupmode=%d", + *status, psdata->cur_h2c_wakeupmode); + } + kfree_skb(skb); + + return 0; +} + +static void ps_init(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + + serdev_device_set_tiocm(nxpdev->serdev, 0, TIOCM_RTS); + usleep_range(5000, 10000); + serdev_device_set_tiocm(nxpdev->serdev, TIOCM_RTS, 0); + usleep_range(5000, 10000); + + switch (psdata->h2c_wakeupmode) { + case WAKEUP_METHOD_DTR: + serdev_device_set_tiocm(nxpdev->serdev, 0, TIOCM_DTR); + serdev_device_set_tiocm(nxpdev->serdev, TIOCM_DTR, 0); + break; + case WAKEUP_METHOD_BREAK: + default: + serdev_device_break_ctl(nxpdev->serdev, -1); + usleep_range(5000, 10000); + serdev_device_break_ctl(nxpdev->serdev, 0); + usleep_range(5000, 10000); + break; + } + if (!test_bit(HCI_RUNNING, &hdev->flags)) { + bt_dev_dbg(hdev, "HCI_RUNNING is not set"); + return; + } + if (psdata->cur_h2c_wakeupmode != psdata->h2c_wakeupmode) + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, NULL, NULL); + if (psdata->cur_psmode != psdata->ps_mode) + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); +} + +/* NXP Firmware Download Feature */ +static int nxp_download_firmware(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + int err = 0; + + nxpdev->fw_dnld_v1_offset = 0; + nxpdev->fw_v1_sent_bytes = 0; + nxpdev->fw_v1_expected_len = HDR_LEN; + nxpdev->fw_v3_offset_correction = 0; + nxpdev->baudrate_changed = false; + nxpdev->timeout_changed = false; + + serdev_device_set_baudrate(nxpdev->serdev, HCI_NXP_PRI_BAUDRATE); + serdev_device_set_flow_control(nxpdev->serdev, 0); + nxpdev->current_baudrate = HCI_NXP_PRI_BAUDRATE; + + /* Wait till FW is downloaded and CTS becomes low */ + err = wait_event_interruptible_timeout(nxpdev->fw_dnld_done_wait_q, + !test_bit(BTNXPUART_FW_DOWNLOADING, + &nxpdev->tx_state), + msecs_to_jiffies(60000)); + if (err == 0) { + bt_dev_err(hdev, "FW Download Timeout."); + return -ETIMEDOUT; + } + + serdev_device_set_flow_control(nxpdev->serdev, 1); + err = serdev_device_wait_for_cts(nxpdev->serdev, 1, 60000); + if (err < 0) { + bt_dev_err(hdev, "CTS is still high. FW Download failed."); + return err; + } + release_firmware(nxpdev->fw); + memset(nxpdev->fw_name, 0, MAX_FW_FILE_NAME_LEN); + + /* Allow the downloaded FW to initialize */ + usleep_range(800000, 1000000); + + return 0; +} + +static void nxp_send_ack(u8 ack, struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + u8 ack_nak[2]; + + if (ack == NXP_ACK_V1 || ack == NXP_NAK_V1) { + ack_nak[0] = ack; + serdev_device_write_buf(nxpdev->serdev, ack_nak, 1); + } else if (ack == NXP_ACK_V3) { + ack_nak[0] = ack; + ack_nak[1] = crc8(crc8_table, ack_nak, 1, 0xff); + serdev_device_write_buf(nxpdev->serdev, ack_nak, 2); + } +} + +static bool nxp_fw_change_baudrate(struct hci_dev *hdev, u16 req_len) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct nxp_bootloader_cmd nxp_cmd5; + struct uart_config uart_config; + + if (req_len == sizeof(nxp_cmd5)) { + nxp_cmd5.header = __cpu_to_le32(5); + nxp_cmd5.arg = 0; + nxp_cmd5.payload_len = __cpu_to_le32(sizeof(uart_config)); + nxp_cmd5.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd5, + sizeof(nxp_cmd5) - 4)); + + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd5, req_len); + nxpdev->fw_v3_offset_correction += req_len; + } else if (req_len == sizeof(uart_config)) { + uart_config.clkdiv.address = __cpu_to_le32(CLKDIVADDR); + uart_config.clkdiv.value = __cpu_to_le32(0x00c00000); + uart_config.uartdiv.address = __cpu_to_le32(UARTDIVADDR); + uart_config.uartdiv.value = __cpu_to_le32(1); + uart_config.mcr.address = __cpu_to_le32(UARTMCRADDR); + uart_config.mcr.value = __cpu_to_le32(MCR); + uart_config.re_init.address = __cpu_to_le32(UARTREINITADDR); + uart_config.re_init.value = __cpu_to_le32(INIT); + uart_config.icr.address = __cpu_to_le32(UARTICRADDR); + uart_config.icr.value = __cpu_to_le32(ICR); + uart_config.fcr.address = __cpu_to_le32(UARTFCRADDR); + uart_config.fcr.value = __cpu_to_le32(FCR); + uart_config.crc = swab32(crc32_be(0UL, (char *)&uart_config, + sizeof(uart_config) - 4)); + serdev_device_write_buf(nxpdev->serdev, (u8 *)&uart_config, req_len); + serdev_device_wait_until_sent(nxpdev->serdev, 0); + nxpdev->fw_v3_offset_correction += req_len; + return true; + } + return false; +} + +static bool nxp_fw_change_timeout(struct hci_dev *hdev, u16 req_len) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct nxp_bootloader_cmd nxp_cmd7; + + if (req_len != sizeof(nxp_cmd7)) + return false; + + nxp_cmd7.header = __cpu_to_le32(7); + nxp_cmd7.arg = __cpu_to_le32(0x70); + nxp_cmd7.payload_len = 0; + nxp_cmd7.crc = swab32(crc32_be(0UL, (char *)&nxp_cmd7, + sizeof(nxp_cmd7) - 4)); + + serdev_device_write_buf(nxpdev->serdev, (u8 *)&nxp_cmd7, req_len); + serdev_device_wait_until_sent(nxpdev->serdev, 0); + nxpdev->fw_v3_offset_correction += req_len; + return true; +} + +static u32 nxp_get_data_len(const u8 *buf) +{ + struct nxp_bootloader_cmd *hdr = (struct nxp_bootloader_cmd *)buf; + + return __le32_to_cpu(hdr->payload_len); +} + +/* for legacy chipsets with V1 bootloader */ +static int nxp_recv_fw_req_v1(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct btnxpuart_data *nxp_data = nxpdev->nxp_data; + struct v1_data_req *req; + u32 requested_len; + int err; + + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); + goto ret; + } + + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) + goto ret; + + req = (struct v1_data_req *)skb_pull_data(skb, sizeof(struct v1_data_req)); + if (!req) + goto ret; + + if ((req->len ^ req->len_comp) != 0xffff) { + bt_dev_dbg(hdev, "ERR: Send NAK"); + nxp_send_ack(NXP_NAK_V1, hdev); + goto ret; + } + nxp_send_ack(NXP_ACK_V1, hdev); + + if (nxp_data->fw_dnld_use_high_baudrate) { + if (!nxpdev->timeout_changed) { + nxpdev->timeout_changed = nxp_fw_change_timeout(hdev, req->len); + goto ret; + } + if (!nxpdev->baudrate_changed) { + nxpdev->baudrate_changed = nxp_fw_change_baudrate(hdev, req->len); + if (nxpdev->baudrate_changed) { + serdev_device_set_baudrate(nxpdev->serdev, + HCI_NXP_SEC_BAUDRATE); + serdev_device_set_flow_control(nxpdev->serdev, 1); + nxpdev->current_baudrate = HCI_NXP_SEC_BAUDRATE; + } + goto ret; + } + } + + if (!strlen(nxpdev->fw_name)) { + snprintf(nxpdev->fw_name, MAX_FW_FILE_NAME_LEN, "%s", + nxp_data->fw_name); + bt_dev_info(hdev, "Request Firmware: %s", nxpdev->fw_name); + err = request_firmware(&nxpdev->fw, nxpdev->fw_name, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Firmware file %s not found", nxpdev->fw_name); + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + return err; + } + } + + requested_len = req->len; + if (requested_len == 0) { + bt_dev_info(hdev, "FW Downloaded Successfully: %zu bytes", nxpdev->fw->size); + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q); + goto ret; + } + if (requested_len & 0x01) { + /* The CRC did not match at the other end. + * Simply send the same bytes again. + */ + requested_len = nxpdev->fw_v1_sent_bytes; + bt_dev_dbg(hdev, "CRC error. Resend %d bytes of FW.", requested_len); + } else { + nxpdev->fw_dnld_v1_offset += nxpdev->fw_v1_sent_bytes; + + /* The FW bin file is made up of many blocks of + * 16 byte header and payload data chunks. If the + * FW has requested a header, read the payload length + * info from the header, before sending the header. + * In the next iteration, the FW should request the + * payload data chunk, which should be equal to the + * payload length read from header. If there is a + * mismatch, clearly the driver and FW are out of sync, + * and we need to re-send the previous header again. + */ + if (requested_len == nxpdev->fw_v1_expected_len) { + if (requested_len == HDR_LEN) + nxpdev->fw_v1_expected_len = nxp_get_data_len(nxpdev->fw->data + + nxpdev->fw_dnld_v1_offset); + else + nxpdev->fw_v1_expected_len = HDR_LEN; + } else { + if (requested_len == HDR_LEN) { + /* FW download out of sync. Send previous chunk again */ + nxpdev->fw_dnld_v1_offset -= nxpdev->fw_v1_sent_bytes; + nxpdev->fw_v1_expected_len = HDR_LEN; + } + } + } + + if (nxpdev->fw_dnld_v1_offset + requested_len <= nxpdev->fw->size) + serdev_device_write_buf(nxpdev->serdev, + nxpdev->fw->data + nxpdev->fw_dnld_v1_offset, + requested_len); + nxpdev->fw_v1_sent_bytes = requested_len; + +ret: + kfree_skb(skb); + return 0; +} + +static u8 *nxp_get_fw_name_from_chipid(struct hci_dev *hdev, u16 chipid) +{ + u8 *fw_name = NULL; + + switch (chipid) { + case CHIP_ID_W9098: + fw_name = FIRMWARE_W9098; + break; + case CHIP_ID_IW416: + fw_name = FIRMWARE_IW416; + break; + case CHIP_ID_IW612: + fw_name = FIRMWARE_IW612; + break; + default: + bt_dev_err(hdev, "Unknown chip signature %04X", chipid); + break; + } + return fw_name; +} + +static int nxp_recv_chip_ver_v3(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct v3_start_ind *req = skb_pull_data(skb, sizeof(struct v3_start_ind)); + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + int err; + + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); + goto ret; + } + + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) + goto ret; + + if (!strlen(nxpdev->fw_name)) { + snprintf(nxpdev->fw_name, MAX_FW_FILE_NAME_LEN, "%s", + nxp_get_fw_name_from_chipid(hdev, req->chip_id)); + + bt_dev_info(hdev, "Request Firmware: %s", nxpdev->fw_name); + err = request_firmware(&nxpdev->fw, nxpdev->fw_name, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Firmware file %s not found", nxpdev->fw_name); + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + goto ret; + } + } + nxp_send_ack(NXP_ACK_V3, hdev); +ret: + kfree_skb(skb); + return 0; +} + +static int nxp_recv_fw_req_v3(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct v3_data_req *req; + + if (test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state)) { + clear_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); + wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); + goto ret; + } + + if (!test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) + goto ret; + + req = (struct v3_data_req *)skb_pull_data(skb, sizeof(struct v3_data_req)); + if (!req || !nxpdev || !nxpdev->fw) + goto ret; + + nxp_send_ack(NXP_ACK_V3, hdev); + + if (!nxpdev->timeout_changed) { + nxpdev->timeout_changed = nxp_fw_change_timeout(hdev, req->len); + goto ret; + } + + if (!nxpdev->baudrate_changed) { + nxpdev->baudrate_changed = nxp_fw_change_baudrate(hdev, req->len); + if (nxpdev->baudrate_changed) { + serdev_device_set_baudrate(nxpdev->serdev, + HCI_NXP_SEC_BAUDRATE); + serdev_device_set_flow_control(nxpdev->serdev, 1); + nxpdev->current_baudrate = HCI_NXP_SEC_BAUDRATE; + } + goto ret; + } + + if (req->len == 0) { + bt_dev_info(hdev, "FW Downloaded Successfully: %zu bytes", nxpdev->fw->size); + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q); + goto ret; + } + if (req->error) + bt_dev_dbg(hdev, "FW Download received err 0x%02x from chip. Resending FW chunk.", + req->error); + + if (req->offset < nxpdev->fw_v3_offset_correction) { + /* This scenario should ideally never occur. + * But if it ever does, FW is out of sync and + * needs a power cycle. + */ + bt_dev_err(hdev, "Something went wrong during FW download. Please power cycle and try again"); + goto ret; + } + + serdev_device_write_buf(nxpdev->serdev, + nxpdev->fw->data + req->offset - nxpdev->fw_v3_offset_correction, + req->len); + +ret: + kfree_skb(skb); + return 0; +} + +static int nxp_set_baudrate_cmd(struct hci_dev *hdev, void *data) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + u32 new_baudrate = __cpu_to_le32(nxpdev->new_baudrate); + struct ps_data *psdata = nxpdev->psdata; + u8 *pcmd = (u8 *)&new_baudrate; + struct sk_buff *skb; + u8 *status; + + if (!psdata) + return 0; + + skb = nxp_drv_send_cmd(hdev, HCI_NXP_SET_OPER_SPEED, 4, pcmd); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting baudrate failed (%ld)", PTR_ERR(skb)); + return PTR_ERR(skb); + } + + status = (u8 *)skb_pull_data(skb, 1); + if (status) { + if (*status == 0) { + serdev_device_set_baudrate(nxpdev->serdev, nxpdev->new_baudrate); + nxpdev->current_baudrate = nxpdev->new_baudrate; + } + bt_dev_dbg(hdev, "Set baudrate response: status=%d, baudrate=%d", + *status, nxpdev->new_baudrate); + } + kfree_skb(skb); + + return 0; +} + +static int nxp_set_ind_reset(struct hci_dev *hdev, void *data) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct sk_buff *skb; + u8 *status; + u8 pcmd = 0; + int err; + + skb = nxp_drv_send_cmd(hdev, HCI_NXP_IND_RESET, 1, &pcmd); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + status = skb_pull_data(skb, 1); + if (status) { + if (*status == 0) { + set_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + err = nxp_download_firmware(hdev); + if (err < 0) + return err; + serdev_device_set_baudrate(nxpdev->serdev, nxpdev->fw_init_baudrate); + nxpdev->current_baudrate = nxpdev->fw_init_baudrate; + if (nxpdev->current_baudrate != HCI_NXP_SEC_BAUDRATE) { + nxpdev->new_baudrate = HCI_NXP_SEC_BAUDRATE; + nxp_set_baudrate_cmd(hdev, NULL); + } + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, NULL, NULL); + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); + } + } + kfree_skb(skb); + + return 0; +} + +/* NXP protocol */ +static bool nxp_check_boot_sign(struct btnxpuart_dev *nxpdev) +{ + int ret; + + serdev_device_set_baudrate(nxpdev->serdev, HCI_NXP_PRI_BAUDRATE); + serdev_device_set_flow_control(nxpdev->serdev, 0); + set_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, &nxpdev->tx_state); + + ret = wait_event_interruptible_timeout(nxpdev->check_boot_sign_wait_q, + !test_bit(BTNXPUART_CHECK_BOOT_SIGNATURE, + &nxpdev->tx_state), + msecs_to_jiffies(1000)); + if (ret == 0) + return false; + else + return true; +} + +static int nxp_setup(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + int err = 0; + + if (!nxpdev) + return 0; + + set_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + init_waitqueue_head(&nxpdev->fw_dnld_done_wait_q); + init_waitqueue_head(&nxpdev->check_boot_sign_wait_q); + + if (nxp_check_boot_sign(nxpdev)) { + bt_dev_dbg(hdev, "Need FW Download."); + err = nxp_download_firmware(hdev); + if (err < 0) + return err; + } else { + bt_dev_dbg(hdev, "FW already running."); + clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); + } + + serdev_device_set_flow_control(nxpdev->serdev, 1); + device_property_read_u32(&nxpdev->serdev->dev, "fw-init-baudrate", + &nxpdev->fw_init_baudrate); + if (!nxpdev->fw_init_baudrate) + nxpdev->fw_init_baudrate = FW_INIT_BAUDRATE; + serdev_device_set_baudrate(nxpdev->serdev, nxpdev->fw_init_baudrate); + nxpdev->current_baudrate = nxpdev->fw_init_baudrate; + + if (nxpdev->current_baudrate != HCI_NXP_SEC_BAUDRATE) { + nxpdev->new_baudrate = HCI_NXP_SEC_BAUDRATE; + hci_cmd_sync_queue(hdev, nxp_set_baudrate_cmd, NULL, NULL); + } + + ps_init(hdev); + + return 0; +} + +static int nxp_enqueue(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + struct ps_data *psdata = nxpdev->psdata; + struct hci_command_hdr *hdr; + u8 param[MAX_USER_PARAMS]; + + if (!nxpdev || !psdata) + goto free_skb; + + /* if vendor commands are received from user space (e.g. hcitool), update + * driver flags accordingly and ask driver to re-send the command to FW. + */ + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT && !psdata->driver_sent_cmd) { + if (!skb->len || skb->len > (MAX_USER_PARAMS + HCI_COMMAND_HDR_SIZE)) + goto send_skb; + + hdr = (struct hci_command_hdr *)skb->data; + if (hdr->plen != (skb->len - HCI_COMMAND_HDR_SIZE)) + goto send_skb; + + memcpy(param, skb->data + HCI_COMMAND_HDR_SIZE, hdr->plen); + switch (__le16_to_cpu(hdr->opcode)) { + case HCI_NXP_AUTO_SLEEP_MODE: + if (hdr->plen >= 1) { + if (param[0] == BT_PS_ENABLE) + psdata->ps_mode = PS_MODE_ENABLE; + else if (param[0] == BT_PS_DISABLE) + psdata->ps_mode = PS_MODE_DISABLE; + hci_cmd_sync_queue(hdev, send_ps_cmd, NULL, NULL); + goto free_skb; + } + break; + case HCI_NXP_WAKEUP_METHOD: + if (hdr->plen >= 4) { + psdata->c2h_wakeupmode = param[0]; + psdata->c2h_wakeup_gpio = param[1]; + switch (param[2]) { + case BT_CTRL_WAKEUP_METHOD_DSR: + psdata->h2c_wakeupmode = WAKEUP_METHOD_DTR; + break; + case BT_CTRL_WAKEUP_METHOD_BREAK: + default: + psdata->h2c_wakeupmode = WAKEUP_METHOD_BREAK; + break; + } + hci_cmd_sync_queue(hdev, send_wakeup_method_cmd, NULL, NULL); + goto free_skb; + } + break; + case HCI_NXP_SET_OPER_SPEED: + if (hdr->plen == 4) { + nxpdev->new_baudrate = *((u32 *)param); + hci_cmd_sync_queue(hdev, nxp_set_baudrate_cmd, NULL, NULL); + goto free_skb; + } + break; + case HCI_NXP_IND_RESET: + if (hdr->plen == 1) { + hci_cmd_sync_queue(hdev, nxp_set_ind_reset, NULL, NULL); + goto free_skb; + } + break; + default: + break; + } + } + +send_skb: + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); + skb_queue_tail(&nxpdev->txq, skb); + + btnxpuart_tx_wakeup(nxpdev); +ret: + return 0; + +free_skb: + kfree_skb(skb); + goto ret; +} + +static struct sk_buff *nxp_dequeue(void *data) +{ + struct btnxpuart_dev *nxpdev = (struct btnxpuart_dev *)data; + + ps_wakeup(nxpdev); + ps_start_timer(nxpdev); + return skb_dequeue(&nxpdev->txq); +} + +/* btnxpuart based on serdev */ +static void btnxpuart_tx_work(struct work_struct *work) +{ + struct btnxpuart_dev *nxpdev = container_of(work, struct btnxpuart_dev, + tx_work); + struct serdev_device *serdev = nxpdev->serdev; + struct hci_dev *hdev = nxpdev->hdev; + struct sk_buff *skb; + int len; + + while ((skb = nxp_dequeue(nxpdev))) { + len = serdev_device_write_buf(serdev, skb->data, skb->len); + hdev->stat.byte_tx += len; + + skb_pull(skb, len); + if (skb->len > 0) { + skb_queue_head(&nxpdev->txq, skb); + break; + } + + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } + + kfree_skb(skb); + } + clear_bit(BTNXPUART_TX_STATE_ACTIVE, &nxpdev->tx_state); +} + +static int btnxpuart_open(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + int err = 0; + + err = serdev_device_open(nxpdev->serdev); + if (err) { + bt_dev_err(hdev, "Unable to open UART device %s", + dev_name(&nxpdev->serdev->dev)); + } + + return err; +} + +static int btnxpuart_close(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + + if (!nxpdev) + return 0; + + serdev_device_close(nxpdev->serdev); + + return 0; +} + +static int btnxpuart_flush(struct hci_dev *hdev) +{ + struct btnxpuart_dev *nxpdev = hci_get_drvdata(hdev); + + if (!nxpdev) + return 0; + + /* Flush any pending characters */ + serdev_device_write_flush(nxpdev->serdev); + skb_queue_purge(&nxpdev->txq); + + cancel_work_sync(&nxpdev->tx_work); + + kfree_skb(nxpdev->rx_skb); + nxpdev->rx_skb = NULL; + + return 0; +} + +static const struct h4_recv_pkt nxp_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, + { NXP_RECV_FW_REQ_V1, .recv = nxp_recv_fw_req_v1 }, + { NXP_RECV_CHIP_VER_V3, .recv = nxp_recv_chip_ver_v3 }, + { NXP_RECV_FW_REQ_V3, .recv = nxp_recv_fw_req_v3 }, +}; + +static bool is_valid_bootloader_signature(const u8 *data, size_t count) +{ + if ((*data == NXP_V1_FW_REQ_PKT && count == sizeof(struct v1_data_req) + 1) || + (*data == NXP_V3_FW_REQ_PKT && count == sizeof(struct v3_data_req) + 1) || + (*data == NXP_V3_CHIP_VER_PKT && count == sizeof(struct v3_start_ind) + 1)) + return true; + else + return false; +} + +static int btnxpuart_receive_buf(struct serdev_device *serdev, const u8 *data, + size_t count) +{ + struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev); + + if (test_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state)) { + if (!is_valid_bootloader_signature(data, count)) { + /* Unknown bootloader signature, skip without returning error */ + return count; + } + } + + ps_start_timer(nxpdev); + + nxpdev->rx_skb = h4_recv_buf(nxpdev->hdev, nxpdev->rx_skb, data, count, + nxp_recv_pkts, ARRAY_SIZE(nxp_recv_pkts)); + if (IS_ERR(nxpdev->rx_skb)) { + int err = PTR_ERR(nxpdev->rx_skb); + + bt_dev_err(nxpdev->hdev, "Frame reassembly failed (%d)", err); + nxpdev->rx_skb = NULL; + return err; + } + nxpdev->hdev->stat.byte_rx += count; + return count; +} + +static void btnxpuart_write_wakeup(struct serdev_device *serdev) +{ + serdev_device_write_wakeup(serdev); +} + +static const struct serdev_device_ops btnxpuart_client_ops = { + .receive_buf = btnxpuart_receive_buf, + .write_wakeup = btnxpuart_write_wakeup, +}; + +static int nxp_serdev_probe(struct serdev_device *serdev) +{ + struct hci_dev *hdev; + struct btnxpuart_dev *nxpdev; + + nxpdev = devm_kzalloc(&serdev->dev, sizeof(*nxpdev), GFP_KERNEL); + if (!nxpdev) + return -ENOMEM; + + nxpdev->nxp_data = (struct btnxpuart_data *)device_get_match_data(&serdev->dev); + + nxpdev->serdev = serdev; + serdev_device_set_drvdata(serdev, nxpdev); + + serdev_device_set_client_ops(serdev, &btnxpuart_client_ops); + + INIT_WORK(&nxpdev->tx_work, btnxpuart_tx_work); + skb_queue_head_init(&nxpdev->txq); + + /* Initialize and register HCI device */ + hdev = hci_alloc_dev(); + if (!hdev) { + dev_err(&serdev->dev, "Can't allocate HCI device\n"); + return -ENOMEM; + } + + nxpdev->hdev = hdev; + + hdev->bus = HCI_UART; + hci_set_drvdata(hdev, nxpdev); + + hdev->manufacturer = MANUFACTURER_NXP; + hdev->open = btnxpuart_open; + hdev->close = btnxpuart_close; + hdev->flush = btnxpuart_flush; + hdev->setup = nxp_setup; + hdev->send = nxp_enqueue; + SET_HCIDEV_DEV(hdev, &serdev->dev); + + if (hci_register_dev(hdev) < 0) { + dev_err(&serdev->dev, "Can't register HCI device\n"); + hci_free_dev(hdev); + return -ENODEV; + } + + if (!ps_init_work(hdev)) + ps_init_timer(hdev); + + crc8_populate_msb(crc8_table, POLYNOMIAL8); + + return 0; +} + +static void nxp_serdev_remove(struct serdev_device *serdev) +{ + struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev); + struct ps_data *psdata = nxpdev->psdata; + struct hci_dev *hdev = nxpdev->hdev; + + /* Restore FW baudrate to fw_init_baudrate if changed. + * This will ensure FW baudrate is in sync with + * driver baudrate in case this driver is re-inserted. + */ + if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) { + nxpdev->new_baudrate = nxpdev->fw_init_baudrate; + nxp_set_baudrate_cmd(hdev, NULL); + } + + if (psdata) { + ps_cancel_timer(nxpdev); + kfree(psdata); + } + hci_unregister_dev(hdev); + hci_free_dev(hdev); +} + +static struct btnxpuart_data w8987_data = { + .fw_dnld_use_high_baudrate = true, + .fw_name = FIRMWARE_W8987, +}; + +static struct btnxpuart_data w8997_data = { + .fw_dnld_use_high_baudrate = false, + .fw_name = FIRMWARE_W8997, +}; + +static const struct of_device_id nxpuart_of_match_table[] = { + { .compatible = "nxp,88w8987-bt", .data = &w8987_data }, + { .compatible = "nxp,88w8997-bt", .data = &w8997_data }, + { } +}; +MODULE_DEVICE_TABLE(of, nxpuart_of_match_table); + +static struct serdev_device_driver nxp_serdev_driver = { + .probe = nxp_serdev_probe, + .remove = nxp_serdev_remove, + .driver = { + .name = "btnxpuart", + .of_match_table = of_match_ptr(nxpuart_of_match_table), + }, +}; + +module_serdev_device_driver(nxp_serdev_driver); + +MODULE_AUTHOR("Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>"); +MODULE_DESCRIPTION("NXP Bluetooth Serial driver v1.0 "); +MODULE_LICENSE("GPL");
This adds a driver based on serdev driver for the NXP BT serial protocol based on running H:4, which can enable the built-in Bluetooth device inside an NXP BT chip. This driver has Power Save feature that will put the chip into sleep state whenever there is no activity for 2000ms, and will be woken up when any activity is to be initiated over UART. This driver enables the power save feature by default by sending the vendor specific commands to the chip during setup. During setup, the driver checks if a FW is already running on the chip by waiting for the bootloader signature, and downloads device specific FW file into the chip over UART if bootloader signature is received.. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> --- v2: Removed conf file support and added static data for each chip based on compatibility devices mentioned in DT bindings. Handled potential memory leaks and null pointer dereference issues, simplified FW download feature, handled byte-order and few cosmetic changes. (Ilpo Järvinen, Alok Tiwari, Hillf Danton) v3: Added conf file support necessary to support different vendor modules, moved .h file contents to .c, cosmetic changes. (Luiz Augusto von Dentz, Rob Herring, Leon Romanovsky) v4: Removed conf file support, optimized driver data, add logic to select FW name based on chip signature (Greg KH, Ilpo Jarvinen, Sherry Sun) v5: Replaced bt_dev_info() with bt_dev_dbg(), handled user-space cmd parsing in nxp_enqueue() in a better way. (Greg KH, Luiz Augusto von Dentz) v6: Add support for fw-init-baudrate parameter from device tree, modified logic to detect FW download is needed or FW is running. (Greg KH, Sherry Sun) --- MAINTAINERS | 1 + drivers/bluetooth/Kconfig | 11 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btnxpuart.c | 1317 +++++++++++++++++++++++++++++++++ 4 files changed, 1330 insertions(+) create mode 100644 drivers/bluetooth/btnxpuart.c