| Message ID | 20230505075354.1634547-3-bhupesh.sharma@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals | expand |
On 05/05/2023 10:53, Bhupesh Sharma wrote: > Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same. > This allows the uSD card to be properly detected on the board. > > Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts") > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 504543ad1a1b..abea44fd369d 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -203,7 +203,7 @@ &sdhc_1 { }; &sdhc_2 { - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */ pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same. This allows the uSD card to be properly detected on the board. Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)