diff mbox series

[v7,10/10] pwm: dwc: use clock rate in hz to avoid rounding issues

Message ID 20221223153820.404565-11-ben.dooks@sifive.com
State New
Headers show
Series Designware PWM driver updates for OF | expand

Commit Message

Ben Dooks Dec. 23, 2022, 3:38 p.m. UTC
As noted, the clock-rate when not a nice multiple of ns is probably
going to end up with inacurate caculations, as well as on a non pci
system the rate may change (although we've not put a clock rate
change notifier in this code yet) so we also add some quick checks
of the rate when we do any calculations with it.

Signed-off-by; Ben Dooks <ben.dooks@sifive.com>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/pwm/pwm-dwc-of.c |  2 +-
 drivers/pwm/pwm-dwc.c    | 29 ++++++++++++++++++++---------
 drivers/pwm/pwm-dwc.h    |  2 +-
 3 files changed, 22 insertions(+), 11 deletions(-)

Comments

Uwe Kleine-König Feb. 16, 2023, 9:39 p.m. UTC | #1
On Fri, Dec 23, 2022 at 03:38:20PM +0000, Ben Dooks wrote:
> As noted, the clock-rate when not a nice multiple of ns is probably
> going to end up with inacurate caculations, as well as on a non pci

Given that such a non-nice ca*l*culation only happens in the of case
that is introduced here, it would be nice to move this patch before the
introduction of the of-support.

> system the rate may change (although we've not put a clock rate
> change notifier in this code yet) so we also add some quick checks
> of the rate when we do any calculations with it.

If the clk rate changes while the PWM is on, this modifies the output.
This is unfortunate and so it justifies adding a call to
clk_rate_exclusive_get() when the PWM is on.
 
Best regards
Uwe
Ben Dooks June 14, 2023, 11:17 a.m. UTC | #2
On 16/02/2023 21:39, Uwe Kleine-König wrote:
> On Fri, Dec 23, 2022 at 03:38:20PM +0000, Ben Dooks wrote:
>> As noted, the clock-rate when not a nice multiple of ns is probably
>> going to end up with inacurate caculations, as well as on a non pci
> 
> Given that such a non-nice ca*l*culation only happens in the of case
> that is introduced here, it would be nice to move this patch before the
> introduction of the of-support.

I've moved of support to the end of the series
you
>> system the rate may change (although we've not put a clock rate
>> change notifier in this code yet) so we also add some quick checks
>> of the rate when we do any calculations with it.
> 
> If the clk rate changes while the PWM is on, this modifies the output.
> This is unfortunate and so it justifies adding a call to
> clk_rate_exclusive_get() when the PWM is on.

I can't really test things any more as the hardware has been returned
to the client and I'm technically off the project (and awaiting this
email address to be closed down).

Could this either be solved by the clk_rate_exclusive_get() or adding
a clock change notifier? Either way I would prefer this to be work for
another patch.

I'll send v8 out later as it has had some re-works due to moving
things around.

Thank you for the review.

--
Ben
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-dwc-of.c b/drivers/pwm/pwm-dwc-of.c
index c5b4351cc7b0..5f7f066859d4 100644
--- a/drivers/pwm/pwm-dwc-of.c
+++ b/drivers/pwm/pwm-dwc-of.c
@@ -50,7 +50,7 @@  static int dwc_pwm_plat_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(dwc->clk),
 				     "failed to get timer clock\n");
 
-	dwc->clk_ns = NSEC_PER_SEC / clk_get_rate(dwc->clk);
+	dwc->clk_rate = clk_get_rate(dwc->clk);
 	return devm_pwmchip_add(dev, &dwc->chip);
 }
 
diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c
index 5ef0fe7ea3e9..f48a6245a3b5 100644
--- a/drivers/pwm/pwm-dwc.c
+++ b/drivers/pwm/pwm-dwc.c
@@ -43,18 +43,22 @@  static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
 	u32 high;
 	u32 low;
 
+	if (dwc->clk)
+		dwc->clk_rate = clk_get_rate(dwc->clk);
+
 	/*
 	 * Calculate width of low and high period in terms of input clock
 	 * periods and check are the result within HW limits between 1 and
 	 * 2^32 periods.
 	 */
-	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, dwc->clk_ns);
+	tmp = state->duty_cycle * dwc->clk_rate;
+	tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
 	if (tmp < 1 || tmp > (1ULL << 32))
 		return -ERANGE;
 	low = tmp - 1;
 
-	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
-				    dwc->clk_ns);
+	tmp = (state->period - state->duty_cycle) * dwc->clk_rate;
+	tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC);
 	if (tmp < 1 || tmp > (1ULL << 32))
 		return -ERANGE;
 	high = tmp - 1;
@@ -120,6 +124,7 @@  static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 			      struct pwm_state *state)
 {
 	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+	unsigned long clk_rate;
 	u64 duty, period;
 	u32 ctrl, ld, ld2;
 
@@ -129,22 +134,28 @@  static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	ld = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
 	ld2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
 
+	if (dwc->clk)
+		dwc->clk_rate = clk_get_rate(dwc->clk);
+
+	clk_rate = dwc->clk_rate;
 	state->enabled = !!(ctrl & DWC_TIM_CTRL_EN);
 
 	/* If we're not in PWM, technically the output is a 50-50
 	 * based on the timer load-count only.
 	 */
 	if (ctrl & DWC_TIM_CTRL_PWM) {
-		duty = (ld + 1) * dwc->clk_ns;
-		period = (ld2 + 1)  * dwc->clk_ns;
+		duty = ld + 1;
+		period = ld2 + 1;
 		period += duty;
 	} else {
-		duty = (ld + 1) * dwc->clk_ns;
+		duty = ld + 1;
 		period = duty * 2;
 	}
 
-	state->period = period;
-	state->duty_cycle = duty;
+	duty *= NSEC_PER_SEC;
+	period *= NSEC_PER_SEC;
+	state->period = DIV_ROUND_CLOSEST_ULL(period, clk_rate);
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(duty, clk_rate);
 	state->polarity = PWM_POLARITY_INVERSED;
 
 	pm_runtime_put_sync(chip->dev);
@@ -164,7 +175,7 @@  struct dwc_pwm *dwc_pwm_alloc(struct device *dev)
 	if (!dwc)
 		return NULL;
 
-	dwc->clk_ns = 10;
+	dwc->clk_rate = NSEC_PER_SEC / 10;
 	dwc->chip.dev = dev;
 	dwc->chip.ops = &dwc_pwm_ops;
 	dwc->chip.npwm = DWC_TIMERS_TOTAL;
diff --git a/drivers/pwm/pwm-dwc.h b/drivers/pwm/pwm-dwc.h
index dc451cb2eff5..19bdc2224690 100644
--- a/drivers/pwm/pwm-dwc.h
+++ b/drivers/pwm/pwm-dwc.h
@@ -41,7 +41,7 @@  struct dwc_pwm {
 	struct pwm_chip chip;
 	void __iomem *base;
 	struct clk *clk;
-	unsigned int clk_ns;
+	unsigned long clk_rate;
 	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
 };
 #define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))