diff mbox series

arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3

Message ID 20230707155849.86649-1-biju.das.jz@bp.renesas.com
State Accepted
Commit 5d7de61ff17f152fb34db1347f53a80d41f511de
Headers show
Series arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3 | expand

Commit Message

Biju Das July 7, 2023, 3:58 p.m. UTC
Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2LC SMARC
EVK.

The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when
PMOD_MTU3 macro is enabled.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts  | 12 ++++++++++++
 .../boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi |  9 +++++++++
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi      | 14 +++++++++++++-
 3 files changed, 34 insertions(+), 1 deletion(-)

Comments

Geert Uytterhoeven July 10, 2023, 1:11 p.m. UTC | #1
On Fri, Jul 7, 2023 at 5:59 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
> Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2LC SMARC
> EVK.
>
> The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when
> PMOD_MTU3 macro is enabled.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.6.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index f67a6f125d9c..0b90367b6d1e 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -35,6 +35,18 @@ 
 /* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
 #define PMOD1_SER0	1
 
+/*
+ * To enable MTU3a PWM on PMOD0,
+ *  - Set DIP-Switch SW1-4 to Off position.
+ *  - Set SW_RSPI_CAN macro to 0.
+ *  - Set PMOD_MTU3 macro to 1.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && SW_RSPI_CAN)
+#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive"
+#endif
+
 #include "r9a07g044c2.dtsi"
 #include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index a78a8def363e..92c64d58349f 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -50,6 +50,15 @@  i2c2_pins: i2c2 {
 			 <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */
 	};
 
+	mtu3_pins: mtu3 {
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+	};
+
 	scif0_pins: scif0 {
 		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 6818fd49b2be..83fce96a2575 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -11,7 +11,6 @@ 
 #include "rzg2lc-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"
 
-
 / {
 	aliases {
 		serial1 = &scif1;
@@ -129,6 +128,19 @@  wm8978: codec@1a {
 	};
 };
 
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&spi1 {
+	status = "disabled";
+};
+#endif
+
 /*
  * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
  * SW1 should be at position 2->3 so that SER0_CTS# line is activated