diff mbox series

[v2,01/14] arm64: dts: qcom: msm8916: Drop RPM bus clocks

Message ID 20230721-topic-rpm_clk_cleanup-v2-1-1e506593b1bd@linaro.org
State Superseded
Headers show
Series Clean up RPM bus clocks remnants | expand

Commit Message

Konrad Dybcio Sept. 12, 2023, 1:31 p.m. UTC 
These clocks are now handled from within the icc framework and are
no longer registered from within the CCF. Remove them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 ---------
 1 file changed, 9 deletions(-)

Comments

Krzysztof Kozlowski Sept. 13, 2023, 7:07 a.m. UTC | #1 
On 12/09/2023 15:31, Konrad Dybcio wrote:
> These clocks are now handled from within the icc framework and are

That's a driver behavior, not hardware.

> no longer registered from within the CCF. Remove them.
> 

Changes in Linux clock drivers should not cause some clocks to disappear
from DTS...


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 33fb65d73104..8c2ec09f57c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -519,9 +519,6 @@  bimc: interconnect@400000 {
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -554,18 +551,12 @@  pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {