@@ -6461,6 +6461,11 @@ value relative to the read-write small data area anchor */
expressions of the form "Symbol Op Symbol" */
BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
+/* This is a 32 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction).No relocation is
+done here - only used for relaxing */
+ BFD_RELOC_MICROBLAZE_32_NONE,
+
/* This is a 64 bit reloc that stores the 32 bit pc relative
value in two words (with an imm instruction). No relocation is
done here - only used for relaxing */
@@ -174,6 +174,21 @@ static reloc_howto_type microblaze_elf_howto_raw[] =
0x0000ffff, /* Dest Mask. */
false), /* PC relative offset? */
+ /* This reloc does nothing. Used for relaxation. */
+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */
+ 0, /* Rightshift. */
+ 2, /* Size (0 = byte, 1 = short, 2 = long). */
+ 32, /* Bitsize. */
+ true, /* PC_relative. */
+ 0, /* Bitpos. */
+ complain_overflow_bitfield, /* Complain on overflow. */
+ NULL, /* Special Function. */
+ "R_MICROBLAZE_32_NONE", /* Name. */
+ false, /* Partial Inplace. */
+ 0, /* Source Mask. */
+ 0, /* Dest Mask. */
+ false), /* PC relative offset? */
+
/* This reloc does nothing. Used for relaxation. */
HOWTO (R_MICROBLAZE_64_NONE, /* Type. */
0, /* Rightshift. */
@@ -560,6 +575,9 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
case BFD_RELOC_NONE:
microblaze_reloc = R_MICROBLAZE_NONE;
break;
+ case BFD_RELOC_MICROBLAZE_32_NONE:
+ microblaze_reloc = R_MICROBLAZE_32_NONE;
+ break;
case BFD_RELOC_MICROBLAZE_64_NONE:
microblaze_reloc = R_MICROBLAZE_64_NONE;
break;
@@ -1954,14 +1972,25 @@ microblaze_elf_relax_section (bfd *abfd,
}
break;
case R_MICROBLAZE_NONE:
+ case R_MICROBLAZE_32_NONE:
{
/* This was a PC-relative instruction that was
completely resolved. */
size_t sfix, efix;
+ unsigned int val;
bfd_vma target_address;
target_address = irel->r_addend + irel->r_offset;
sfix = calc_fixup (irel->r_offset, 0, sec);
efix = calc_fixup (target_address, 0, sec);
+
+ /* Validate the in-band val. */
+ val = bfd_get_32 (abfd, contents + irel->r_offset);
+ if (val != irel->r_addend &&
+ ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE)
+ {
+ fprintf (stderr, "%d: CORRUPT relax reloc %x %llx\n",
+ __LINE__, val, (long long) irel->r_addend);
+ }
irel->r_addend -= (efix - sfix);
/* Should use HOWTO. */
microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
@@ -2009,6 +2038,55 @@ microblaze_elf_relax_section (bfd *abfd,
irelscanend = irelocs + o->reloc_count;
for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
{
+ if (ELF32_R_TYPE (irelscan->r_info) ==
+ (int) R_MICROBLAZE_32_NONE)
+ {
+ unsigned int val;
+
+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+
+ /* hax: We only do the following fixup
+ for debug location lists. */
+ if (strcmp(".debug_loc", o->name))
+ continue;
+
+ /* This was a PC-relative instruction
+ that was completely resolved. */
+ if (ocontents == NULL)
+ {
+ if (elf_section_data (o)->this_hdr.contents != NULL)
+ ocontents = elf_section_data (o)->this_hdr.contents;
+ else
+ {
+ /* We always cache the section contents.
+ Perhaps, if info->keep_memory is FALSE, we
+ should free them, if we are permitted to. */
+ if (o->rawsize == 0)
+ o->rawsize = o->size;
+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
+ if (ocontents == NULL)
+ goto error_return;
+ if (!bfd_get_section_contents (abfd, o, ocontents,
+ (file_ptr) 0,
+ o->rawsize))
+ goto error_return;
+ elf_section_data (o)->this_hdr.contents =
+ ocontents;
+ }
+ }
+
+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
+ if (val != irelscan->r_addend)
+ fprintf (stderr, "%d: CORRUPT relax reloc! %x %llx\n",
+ __LINE__, val, (long long) irelscan->r_addend);
+
+ irelscan->r_addend -= calc_fixup (irelscan->r_addend,
+ 0, sec);
+ microblaze_bfd_write_imm_value_32 (abfd, ocontents +
+ irelscan->r_offset,
+ irelscan->r_addend);
+ }
+
if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
{
isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
@@ -2068,7 +2146,7 @@ microblaze_elf_relax_section (bfd *abfd,
elf_section_data (o)->this_hdr.contents = ocontents;
}
}
- irelscan->r_addend -= calc_fixup (irel->r_addend
+ irelscan->r_addend -= calc_fixup (irelscan->r_addend
+ isym->st_value,
0,
sec);
@@ -3010,6 +3010,7 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
"BFD_RELOC_MICROBLAZE_32_ROSDA",
"BFD_RELOC_MICROBLAZE_32_RWSDA",
"BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
+ "BFD_RELOC_MICROBLAZE_32_NONE",
"BFD_RELOC_MICROBLAZE_64_NONE",
"BFD_RELOC_MICROBLAZE_64_GOTPC",
"BFD_RELOC_MICROBLAZE_64_GOT",
@@ -6694,6 +6694,12 @@ ENUM
ENUMDOC
This is a 32 bit reloc for the microblaze to handle
expressions of the form "Symbol Op Symbol"
+ENUM
+ BFD_RELOC_MICROBLAZE_32_NONE
+ENUMDOC
+ This is a 32 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). No relocation is
+ done here - only used for relaxing
ENUM
BFD_RELOC_MICROBLAZE_64_NONE
ENUMDOC
@@ -15279,6 +15279,10 @@ is_8bit_abs_reloc (Filedata * filedata, unsigned int reloc_type)
return reloc_type == 54; /* R_RISCV_SET8. */
case EM_Z80:
return reloc_type == 1; /* R_Z80_8. */
+ case EM_MICROBLAZE:
+ return reloc_type == 33 /* R_MICROBLAZE_32_NONE. */
+ || reloc_type == 0 /* R_MICROBLAZE_NONE. */
+ || reloc_type == 9; /* R_MICROBLAZE_64_NONE. */
default:
return false;
}
@@ -915,7 +915,7 @@ md_assemble (char * str)
unsigned reg2;
unsigned reg3;
unsigned isize;
- unsigned int immed = 0, temp;
+ unsigned int immed = 0, immed2 = 0, temp;
expressionS exp;
char name[20];
@@ -1177,6 +1177,85 @@ md_assemble (char * str)
inst |= (immed << IMM_LOW) & IMM5_MASK;
break;
+ case INST_TYPE_RD_R1_IMM5_IMM5:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg1 = 0;
+ }
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */
+ else
+ {
+ as_fatal (_("Error in statement syntax"));
+ reg2 = 0;
+ }
+
+ /* Check for spl registers. */
+ if (check_spl_reg (®1))
+ as_fatal (_("Cannot use special register with this instruction"));
+ if (check_spl_reg (®2))
+ as_fatal (_("Cannot use special register with this instruction"));
+
+ /* Width immediate value. */
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ if (exp.X_op != O_constant)
+ {
+ as_warn (_(
+ "Symbol used as immediate width value for bit field instruction"));
+ immed = 1;
+ }
+ else
+ immed = exp.X_add_number;
+
+ if (opcode->instr == bsefi && immed > 31)
+ as_fatal (_("Width value must be less than 32"));
+
+ /* Shift immediate value. */
+ if (strcmp (op_end, ""))
+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
+ else
+ as_fatal (_("Error in statement syntax"));
+
+ if (exp.X_op != O_constant)
+ {
+ as_warn (_(
+ "Symbol used as immediate shift value for bit field instruction"));
+ immed2 = 0;
+ }
+ else
+ {
+ output = frag_more (isize);
+ immed2 = exp.X_add_number;
+ }
+
+ if (immed2 != (immed2 % 32))
+ {
+ as_warn (_("Shift value greater than 32. using <value %% 32>"));
+ immed2 = immed2 % 32;
+ }
+
+ /* Check combined value. */
+ if (immed + immed2 > 32)
+ as_fatal (_("Width value + shift value must not be greater than 32"));
+
+ inst |= (reg1 << RD_LOW) & RD_MASK;
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+
+ if (opcode->instr == bsefi)
+ inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
+ else
+ inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
+
+ inst |= (immed2 << IMM_LOW) & IMM5_MASK;
+ break;
+
case INST_TYPE_R1_R2:
if (strcmp (op_end, ""))
op_end = parse_reg (op_end + 1, ®1); /* Get r1. */
@@ -2209,9 +2288,12 @@ md_apply_fix (fixS * fixP,
moves code around due to relaxing. */
if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
+ else if (fixP->fx_r_type == BFD_RELOC_32)
+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
else
fixP->fx_r_type = BFD_RELOC_NONE;
fixP->fx_addsy = section_symbol (absolute_section);
+ fixP->fx_done = 0;
}
return;
}
@@ -2432,6 +2514,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
switch (fixp->fx_r_type)
{
case BFD_RELOC_NONE:
+ case BFD_RELOC_MICROBLAZE_32_NONE:
case BFD_RELOC_MICROBLAZE_64_NONE:
case BFD_RELOC_32:
case BFD_RELOC_MICROBLAZE_32_LO:
@@ -47,3 +47,9 @@ Disassembly of section .text:
00000040 <swaph>:
40: 900001e2 swaph r0, r0
+
+00000044 <bsefi>:
+ 44: 64004000 bsefi r0, r0
+
+00000048 <bsifi>:
+ 48: 64008000 bsifi r0, r0
@@ -54,4 +54,12 @@ swapb:
.global swaph
swaph:
swaph r0,r0
+ .text
+ .global bsefi
+bsefi:
+ bsefi r0,r0
+ .text
+ .global bsifi
+bsifi:
+ bsifi r0,r0
@@ -61,6 +61,7 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type)
RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30) /* PC-relative TEXT offset. */
RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31) /* TEXT Entry offset 64-bit. */
RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit. */
+ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
END_RELOC_NUMBERS (R_MICROBLAZE_max)
/* Global base address names. */
@@ -90,6 +90,21 @@ get_field_imm5_mbar (struct string_buf *buf, long instr)
return p;
}
+static char *
+get_field_imm5width (struct string_buf *buf, long instr)
+{
+ char *p = strbuf (buf);
+
+ if (instr & 0x00004000)
+ sprintf (p, "%d",
+ (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
+ else
+ sprintf (p, "%d",
+ (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) -
+ ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
+ return p;
+}
+
static char *
get_field_rfsl (struct string_buf *buf, long instr)
{
@@ -427,6 +442,14 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
/* For mbar 16 or sleep insn. */
case INST_TYPE_NONE:
break;
+ /* For bit field insns. */
+ case INST_TYPE_RD_R1_IMM5_IMM5:
+ print_func (stream, "\t%s, %s, %s, %s",
+ get_field_rd (&buf, inst),
+ get_field_r1 (&buf, inst),
+ get_field_imm5width (&buf, inst),
+ get_field_imm5 (&buf, inst));
+ break;
/* For tuqula instruction */
case INST_TYPE_RD:
print_func (stream, "\t%s", get_field_rd (&buf, inst));
@@ -59,6 +59,9 @@
/* For mbar. */
#define INST_TYPE_IMM5 20
+/* For bsefi and bsifi */
+#define INST_TYPE_RD_R1_IMM5_IMM5 21
+
#define INST_TYPE_NONE 25
@@ -89,7 +92,9 @@
#define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */
#define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */
#define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
+#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
#define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
+#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */
#define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
#define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
@@ -102,7 +107,7 @@
#define DELAY_SLOT 1
#define NO_DELAY_SLOT 0
-#define MAX_OPCODES 300
+#define MAX_OPCODES 301
const struct op_code_struct
{
@@ -159,6 +164,8 @@ const struct op_code_struct
{"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
{"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
{"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
+ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
+ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
{"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
{"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
{"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
#define MIN_IMM5 ((int) 0x00000000)
#define MAX_IMM5 ((int) 0x0000001f)
+#define MIN_IMM_WIDTH ((int) 0x00000001)
+#define MAX_IMM_WIDTH ((int) 0x00000020)
+
#endif /* MICROBLAZE_OPC */
@@ -29,7 +29,7 @@ enum microblaze_instr
addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
mulh, mulhu, mulhsu, swapb, swaph,
idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
- ncget, ncput, muli, bslli, bsrai, bsrli, mului,
+ ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
/* 'or/and/xor' are C++ keywords. */
microblaze_or, microblaze_and, microblaze_xor,
andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
@@ -130,6 +130,7 @@ enum microblaze_instr_type
#define RB_LOW 11 /* Low bit for RB. */
#define IMM_LOW 0 /* Low bit for immediate. */
#define IMM_MBAR 21 /* low bit for mbar instruction. */
+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
#define RD_MASK 0x03E00000
#define RA_MASK 0x001F0000
@@ -142,6 +143,9 @@ enum microblaze_instr_type
/* Imm mask for mbar. */
#define IMM5_MBAR_MASK 0x03E00000
+/* Imm mask for extract/insert width. */
+#define IMM5_WIDTH_MASK 0x000007C0
+
/* FSL imm mask for get, put instructions. */
#define RFSL_MASK 0x000000F