| Message ID | acc4ff4b-811a-4a6d-8f58-9d8da3be40bb@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v1] spi: dt-bindings: spi-rockchip: restrict num-cs | expand |
On 1/23/24 10:17, Luis de Arquer wrote: > On 1/22/24 23:59, Johan Jonker wrote: >> In the driver spi-rockchip.c max_native_cs is limited to 4 and the >> default num-cs property is 1. Restrict num-cs in spi-rockchip.yaml. >> > > Doesn't num-cs include gpio chip selects too? > I have a setup with num-cs = <12> which uses non-native cs-gpios just fine Given that bindings and Linux drivers capabilities are 2 separate things. However this document has also a purpose that must notify mainline maintainers if users submit bogus DT values. Currently that limit is set to 4 in the mainline driver. You are free to submit a real board file/patch serie afterwords as proof for review with 12 spi chips and then adjust this limit and increase ROCKCHIP_SPI_MAX_CS_NUM. Johan > > Luis > >> Signed-off-by: Johan Jonker <jbx6244@gmail.com> >> --- >> Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >> index e4941e9212d1..00d555bcbad3 100644 >> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >> @@ -65,6 +65,11 @@ properties: >> - const: tx >> - const: rx >> >> + num-cs: >> + default: 1 >> + minimum: 1 >> + maximum: 4 >> + >> rx-sample-delay-ns: >> default: 0 >> description: >> -- >> 2.39.2 >> >> >> _______________________________________________ >> Linux-rockchip mailing list >> Linux-rockchip@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-rockchip >
On 1/23/24 11:49, Johan Jonker wrote: > > > On 1/23/24 10:17, Luis de Arquer wrote: >> On 1/22/24 23:59, Johan Jonker wrote: >>> In the driver spi-rockchip.c max_native_cs is limited to 4 and the >>> default num-cs property is 1. Restrict num-cs in spi-rockchip.yaml. >>> >> > >> Doesn't num-cs include gpio chip selects too? >> I have a setup with num-cs = <12> which uses non-native cs-gpios just fine > > Given that bindings and Linux drivers capabilities are 2 separate things. > However this document has also a purpose that must notify mainline maintainers if users submit bogus DT values. > Currently that limit is set to 4 in the mainline driver. > You are free to submit a real board file/patch serie afterwords as proof for review with 12 spi chips and then adjust this limit and increase ROCKCHIP_SPI_MAX_CS_NUM. Hi Johan, OK to that, I was not aware a driver could limit num-cs (I thought it could be extended with as many gpios as needed without involving the controller driver). I thought of num-cs as a spi subsystem generic thing. In fact, I was reviewing the setup I mentioned, and even it defines 12 cs in the controller with no driver complaints, so far only 3 of them are mapped to devices (I'll have to review the driver before going any futher!) Luis > > Johan > >> >> Luis >> >>> Signed-off-by: Johan Jonker <jbx6244@gmail.com> >>> --- >>> Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> index e4941e9212d1..00d555bcbad3 100644 >>> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> @@ -65,6 +65,11 @@ properties: >>> - const: tx >>> - const: rx >>> >>> + num-cs: >>> + default: 1 >>> + minimum: 1 >>> + maximum: 4 >>> + >>> rx-sample-delay-ns: >>> default: 0 >>> description: >>> -- >>> 2.39.2 >>> >>> >>> _______________________________________________ >>> Linux-rockchip mailing list >>> Linux-rockchip@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip >>
On 23/01/2024 10:49 am, Johan Jonker wrote: > > > On 1/23/24 10:17, Luis de Arquer wrote: >> On 1/22/24 23:59, Johan Jonker wrote: >>> In the driver spi-rockchip.c max_native_cs is limited to 4 and the >>> default num-cs property is 1. Restrict num-cs in spi-rockchip.yaml. >>> >> > >> Doesn't num-cs include gpio chip selects too? >> I have a setup with num-cs = <12> which uses non-native cs-gpios just fine > > Given that bindings and Linux drivers capabilities are 2 separate things. Er, that's the whole point - bindings and drivers *are* separate things, and bindings do not describe drivers. Not least since the fundamental model is to have one canonical binding for multiple different drivers to consume. There seems to be some ambiguity as to whether the common "num-cs" property is supposed to describe the number of dedicated hardware chipselects or the total number including additional GPIOs, but either way this change appears to be objectively wrong - if it's the former than the comment in the driver plus a survey of a few TRMs implies that the maximum number of hardware lines is 2; if it's the latter then obviously it's valid for a platform to wire up 3 or more additional GPIOs as desired, and for a DT to accurately describe that, regardless of whether any particular consumer happens to support it yet or not. For example, AFAICS the U-Boot and FreeBSD drivers for Rockchip SPI appear not to support GPIO chipselects at all. Thanks, Robin. > However this document has also a purpose that must notify mainline maintainers if users submit bogus DT values. > Currently that limit is set to 4 in the mainline driver. > You are free to submit a real board file/patch serie afterwords as proof for review with 12 spi chips and then adjust this limit and increase ROCKCHIP_SPI_MAX_CS_NUM. > > Johan > >> >> Luis >> >>> Signed-off-by: Johan Jonker <jbx6244@gmail.com> >>> --- >>> Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> index e4941e9212d1..00d555bcbad3 100644 >>> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml >>> @@ -65,6 +65,11 @@ properties: >>> - const: tx >>> - const: rx >>> >>> + num-cs: >>> + default: 1 >>> + minimum: 1 >>> + maximum: 4 >>> + >>> rx-sample-delay-ns: >>> default: 0 >>> description: >>> -- >>> 2.39.2 >>> >>> >>> _______________________________________________ >>> Linux-rockchip mailing list >>> Linux-rockchip@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-rockchip >> > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index e4941e9212d1..00d555bcbad3 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -65,6 +65,11 @@ properties: - const: tx - const: rx + num-cs: + default: 1 + minimum: 1 + maximum: 4 + rx-sample-delay-ns: default: 0 description:
In the driver spi-rockchip.c max_native_cs is limited to 4 and the default num-cs property is 1. Restrict num-cs in spi-rockchip.yaml. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) -- 2.39.2