diff mbox series

[v2,2/6] dt-bindings: PCI: qcom,pcie-sm8450: move SM8450 to dedicated schema

Message ID 20240125-dt-bindings-pci-qcom-split-v2-2-6b58efd91a7a@linaro.org
State Accepted
Commit 88c9b3af4e3123cdd1369c5e5138fc56f244edc5
Headers show
Series dt-bindings: PCI: qcom: move to dedicated schema (part one) | expand

Commit Message

Krzysztof Kozlowski Jan. 25, 2024, 1:03 p.m. UTC 
Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.

This creates equivalent schema file, except:
 - Missing required compatible which is actually redundant.
 - Expecting eight MSI interrupts, instead of only one, which was
   incomplete hardware description.

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml  | 175 +++++++++++++++++++++
 .../devicetree/bindings/pci/qcom,pcie.yaml         |  67 --------
 2 files changed, 175 insertions(+), 67 deletions(-)

Comments

Rob Herring (Arm) Jan. 26, 2024, 3:02 a.m. UTC | #1 
On Thu, 25 Jan 2024 14:03:25 +0100, Krzysztof Kozlowski wrote:
> Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
> to make reviewing easier.
> 
> This creates equivalent schema file, except:
>  - Missing required compatible which is actually redundant.
>  - Expecting eight MSI interrupts, instead of only one, which was
>    incomplete hardware description.
> 
> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml  | 175 +++++++++++++++++++++
>  .../devicetree/bindings/pci/qcom,pcie.yaml         |  67 --------
>  2 files changed, 175 insertions(+), 67 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.example.dtb: pcie@1c00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'iommu-map', 'linux,pci-domain', 'max-link-speed', 'msi-map', 'msi-map-mask', 'num-lanes', 'perst-gpios', 'phy-names', 'phys', 'power-domains', 'ranges', 'wake-gpios' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240125-dt-bindings-pci-qcom-split-v2-2-6b58efd91a7a@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Krzysztof Kozlowski Jan. 26, 2024, 8:48 a.m. UTC | #2 
On 26/01/2024 04:02, Rob Herring wrote:
> 
> On Thu, 25 Jan 2024 14:03:25 +0100, Krzysztof Kozlowski wrote:
>> Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
>> to make reviewing easier.
>>
>> This creates equivalent schema file, except:
>>  - Missing required compatible which is actually redundant.
>>  - Expecting eight MSI interrupts, instead of only one, which was
>>    incomplete hardware description.
>>
>> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml  | 175 +++++++++++++++++++++
>>  .../devicetree/bindings/pci/qcom,pcie.yaml         |  67 --------
>>  2 files changed, 175 insertions(+), 67 deletions(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.example.dtb: pcie@1c00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'iommu-map', 'linux,pci-domain', 'max-link-speed', 'msi-map', 'msi-map-mask', 'num-lanes', 'perst-gpios', 'phy-names', 'phys', 'power-domains', 'ranges', 'wake-gpios' were unexpected)
> 	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#

I thought that's error coming from dtschema about msi-map, but in fact I
removed a bit too much in this binding when dropping if:then:.

I'll fix in v3.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 000000000000..eff5bf7bd022
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,175 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 11
+    maxItems: 12
+
+  clock-names:
+    minItems: 11
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8450-pcie0";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            max-link-speed = <2>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                     <&pcie0_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+            msi-map = <0x0 &gic_its 0x5981 0x1>,
+                      <0x100 &gic_its 0x5980 0x1>;
+            msi-map-mask = <0xff00>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 3b7dd9a4ef60..791ddab8ddc7 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -38,8 +38,6 @@  properties:
           - qcom,pcie-sm8150
           - qcom,pcie-sm8250
           - qcom,pcie-sm8350
-          - qcom,pcie-sm8450-pcie0
-          - qcom,pcie-sm8450-pcie1
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -219,8 +217,6 @@  allOf:
               - qcom,pcie-sdx55
               - qcom,pcie-sm8250
               - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
     then:
       properties:
         reg:
@@ -648,67 +644,6 @@  allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie0
-    then:
-      properties:
-        clocks:
-          minItems: 12
-          maxItems: 12
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie1
-    then:
-      properties:
-        clocks:
-          minItems: 11
-          maxItems: 11
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -844,8 +779,6 @@  allOf:
               - qcom,pcie-sm8150
               - qcom,pcie-sm8250
               - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
     then:
       oneOf:
         - properties: