Message ID | 20231220-fp5-pmic-glink-v1-0-2a1f8e3c661c@fairphone.com |
---|---|
Headers | show |
Series | Fairphone 5 PMIC-GLINK support (USB-C, charger, fuel gauge) | expand |
On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote: > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote: > > On 21.12.2023 11:34, Dmitry Baryshkov wrote: > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@fairphone.com> wrote: > > >> > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote: > > >>> On 20.12.2023 11:02, Luca Weiss wrote: > > >>>> This series adds all the necessary bits to enable USB-C role switching, > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > >>>> > > >>>> One thing that could be made different is the pmic-glink compatible. > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since > > >>>> there's plenty of firmware variety on sc7280-based platforms and they > > >>>> might require different quirks in the future, so limit this PDOS quirk > > >>>> to just qcm6490 for now. > > >>>> > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me > > >>>> know :) > > >>> IMO it's best to continue using the "base soc" (which just so happened > > >>> to fall onto sc7280 this time around) for all compatibles, unless the > > >>> derivatives actually had changes > > >> > > >> Hi Konrad, > > >> > > >> I think at some point I asked Dmitry what he thought and he mentioned > > >> qcm6490. Even found the message again: > > >> > > >>> well, since it is a firmware thing, you might want to emphasise that. > > >>> So from my POV qcm6490 makes more sense > > >> > > >> But yeah since it's likely that sc7280 firmware behaves the same as > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case > > >> we change it later :) I'll send a v2 with those changes. > > > > > > Worst case we end up with sc7280 which has yet another slightly > > > different UCSI / PMIC GLINK implementation, but the compatible string > > > is already taken. > > > I still suppose that this should be a qcm6490-related string. > > Right, let's keep qcm then > > Ack from my side also. Thanks for the feedback! This doesn't apply to my tree, where should it be going through? thanks, greg k-h
On Tue Jan 2, 2024 at 2:36 PM CET, Greg Kroah-Hartman wrote: > On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote: > > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote: > > > On 21.12.2023 11:34, Dmitry Baryshkov wrote: > > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@fairphone.com> wrote: > > > >> > > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote: > > > >>> On 20.12.2023 11:02, Luca Weiss wrote: > > > >>>> This series adds all the necessary bits to enable USB-C role switching, > > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > > >>>> > > > >>>> One thing that could be made different is the pmic-glink compatible. > > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since > > > >>>> there's plenty of firmware variety on sc7280-based platforms and they > > > >>>> might require different quirks in the future, so limit this PDOS quirk > > > >>>> to just qcm6490 for now. > > > >>>> > > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me > > > >>>> know :) > > > >>> IMO it's best to continue using the "base soc" (which just so happened > > > >>> to fall onto sc7280 this time around) for all compatibles, unless the > > > >>> derivatives actually had changes > > > >> > > > >> Hi Konrad, > > > >> > > > >> I think at some point I asked Dmitry what he thought and he mentioned > > > >> qcm6490. Even found the message again: > > > >> > > > >>> well, since it is a firmware thing, you might want to emphasise that. > > > >>> So from my POV qcm6490 makes more sense > > > >> > > > >> But yeah since it's likely that sc7280 firmware behaves the same as > > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case > > > >> we change it later :) I'll send a v2 with those changes. > > > > > > > > Worst case we end up with sc7280 which has yet another slightly > > > > different UCSI / PMIC GLINK implementation, but the compatible string > > > > is already taken. > > > > I still suppose that this should be a qcm6490-related string. > > > Right, let's keep qcm then > > > > Ack from my side also. Thanks for the feedback! > > This doesn't apply to my tree, where should it be going through? As far as I can see the dependency for the driver commit 1d103d6af241 ("usb: typec: ucsi: fix UCSI on buggy Qualcomm devices") was applied to Bjorn's qcom tree, so 2/3 should also go there then. Patch 3/3 (arm64 dts) definitely also Bjorn's qcom tree. So that leaves patch 1/3 which Bjorn can probably pick up as well but looking at git log you also picked up some for that file in the past, dunno. Regards Luca > > thanks, > greg k-h
On Tue, Jan 02, 2024 at 02:43:24PM +0100, Luca Weiss wrote: > On Tue Jan 2, 2024 at 2:36 PM CET, Greg Kroah-Hartman wrote: > > On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote: > > > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote: > > > > On 21.12.2023 11:34, Dmitry Baryshkov wrote: > > > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > >> > > > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote: > > > > >>> On 20.12.2023 11:02, Luca Weiss wrote: > > > > >>>> This series adds all the necessary bits to enable USB-C role switching, > > > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > > > >>>> > > > > >>>> One thing that could be made different is the pmic-glink compatible. > > > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since > > > > >>>> there's plenty of firmware variety on sc7280-based platforms and they > > > > >>>> might require different quirks in the future, so limit this PDOS quirk > > > > >>>> to just qcm6490 for now. > > > > >>>> > > > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me > > > > >>>> know :) > > > > >>> IMO it's best to continue using the "base soc" (which just so happened > > > > >>> to fall onto sc7280 this time around) for all compatibles, unless the > > > > >>> derivatives actually had changes > > > > >> > > > > >> Hi Konrad, > > > > >> > > > > >> I think at some point I asked Dmitry what he thought and he mentioned > > > > >> qcm6490. Even found the message again: > > > > >> > > > > >>> well, since it is a firmware thing, you might want to emphasise that. > > > > >>> So from my POV qcm6490 makes more sense > > > > >> > > > > >> But yeah since it's likely that sc7280 firmware behaves the same as > > > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case > > > > >> we change it later :) I'll send a v2 with those changes. > > > > > > > > > > Worst case we end up with sc7280 which has yet another slightly > > > > > different UCSI / PMIC GLINK implementation, but the compatible string > > > > > is already taken. > > > > > I still suppose that this should be a qcm6490-related string. > > > > Right, let's keep qcm then > > > > > > Ack from my side also. Thanks for the feedback! > > > > This doesn't apply to my tree, where should it be going through? > > As far as I can see the dependency for the driver commit 1d103d6af241 > ("usb: typec: ucsi: fix UCSI on buggy Qualcomm devices") was applied to > Bjorn's qcom tree, so 2/3 should also go there then. > > Patch 3/3 (arm64 dts) definitely also Bjorn's qcom tree. > > So that leaves patch 1/3 which Bjorn can probably pick up as well but > looking at git log you also picked up some for that file in the past, > dunno. Ok, for any remaining ones that want to be merged before 6.8-rc1 is out, feel free to add my: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> If they don't get picked up by 6.8-rc1, feel free to rebase and send it for me to take through my tree. thanks, greg k-h
On Wed, 20 Dec 2023 11:02:55 +0100, Luca Weiss wrote: > This series adds all the necessary bits to enable USB-C role switching, > charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > One thing that could be made different is the pmic-glink compatible. > I've chosen to use qcm6490 compatible for it and not sc7280 since > there's plenty of firmware variety on sc7280-based platforms and they > might require different quirks in the future, so limit this PDOS quirk > to just qcm6490 for now. > > [...] Applied, thanks! [3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMIC GLINK commit: 4cc920ed7899de91ea39b6c9bdb0ebb6860e8b47 Best regards,
On Tue Jan 2, 2024 at 2:53 PM CET, Greg Kroah-Hartman wrote: > On Tue, Jan 02, 2024 at 02:43:24PM +0100, Luca Weiss wrote: > > On Tue Jan 2, 2024 at 2:36 PM CET, Greg Kroah-Hartman wrote: > > > On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote: > > > > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote: > > > > > On 21.12.2023 11:34, Dmitry Baryshkov wrote: > > > > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > > >> > > > > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote: > > > > > >>> On 20.12.2023 11:02, Luca Weiss wrote: > > > > > >>>> This series adds all the necessary bits to enable USB-C role switching, > > > > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > > > > >>>> > > > > > >>>> One thing that could be made different is the pmic-glink compatible. > > > > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since > > > > > >>>> there's plenty of firmware variety on sc7280-based platforms and they > > > > > >>>> might require different quirks in the future, so limit this PDOS quirk > > > > > >>>> to just qcm6490 for now. > > > > > >>>> > > > > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me > > > > > >>>> know :) > > > > > >>> IMO it's best to continue using the "base soc" (which just so happened > > > > > >>> to fall onto sc7280 this time around) for all compatibles, unless the > > > > > >>> derivatives actually had changes > > > > > >> > > > > > >> Hi Konrad, > > > > > >> > > > > > >> I think at some point I asked Dmitry what he thought and he mentioned > > > > > >> qcm6490. Even found the message again: > > > > > >> > > > > > >>> well, since it is a firmware thing, you might want to emphasise that. > > > > > >>> So from my POV qcm6490 makes more sense > > > > > >> > > > > > >> But yeah since it's likely that sc7280 firmware behaves the same as > > > > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case > > > > > >> we change it later :) I'll send a v2 with those changes. > > > > > > > > > > > > Worst case we end up with sc7280 which has yet another slightly > > > > > > different UCSI / PMIC GLINK implementation, but the compatible string > > > > > > is already taken. > > > > > > I still suppose that this should be a qcm6490-related string. > > > > > Right, let's keep qcm then > > > > > > > > Ack from my side also. Thanks for the feedback! > > > > > > This doesn't apply to my tree, where should it be going through? > > > > As far as I can see the dependency for the driver commit 1d103d6af241 > > ("usb: typec: ucsi: fix UCSI on buggy Qualcomm devices") was applied to > > Bjorn's qcom tree, so 2/3 should also go there then. > > > > Patch 3/3 (arm64 dts) definitely also Bjorn's qcom tree. > > > > So that leaves patch 1/3 which Bjorn can probably pick up as well but > > looking at git log you also picked up some for that file in the past, > > dunno. > > Ok, for any remaining ones that want to be merged before 6.8-rc1 is out, > feel free to add my: > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > If they don't get picked up by 6.8-rc1, feel free to rebase and send it > for me to take through my tree. Hi Greg, This applies cleanly on -next as of next-20240206 still. Could you please pick it up for v6.9? I can also send a v2 with only the two remaining patches (dts was applied to qcom by Bjorn already). Regards Luca > > thanks, > > greg k-h
On Wed, Feb 07, 2024 at 12:20:00AM +0100, Luca Weiss wrote: > On Tue Jan 2, 2024 at 2:53 PM CET, Greg Kroah-Hartman wrote: > > On Tue, Jan 02, 2024 at 02:43:24PM +0100, Luca Weiss wrote: > > > On Tue Jan 2, 2024 at 2:36 PM CET, Greg Kroah-Hartman wrote: > > > > On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote: > > > > > On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote: > > > > > > On 21.12.2023 11:34, Dmitry Baryshkov wrote: > > > > > > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@fairphone.com> wrote: > > > > > > >> > > > > > > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote: > > > > > > >>> On 20.12.2023 11:02, Luca Weiss wrote: > > > > > > >>>> This series adds all the necessary bits to enable USB-C role switching, > > > > > > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5. > > > > > > >>>> > > > > > > >>>> One thing that could be made different is the pmic-glink compatible. > > > > > > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since > > > > > > >>>> there's plenty of firmware variety on sc7280-based platforms and they > > > > > > >>>> might require different quirks in the future, so limit this PDOS quirk > > > > > > >>>> to just qcm6490 for now. > > > > > > >>>> > > > > > > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me > > > > > > >>>> know :) > > > > > > >>> IMO it's best to continue using the "base soc" (which just so happened > > > > > > >>> to fall onto sc7280 this time around) for all compatibles, unless the > > > > > > >>> derivatives actually had changes > > > > > > >> > > > > > > >> Hi Konrad, > > > > > > >> > > > > > > >> I think at some point I asked Dmitry what he thought and he mentioned > > > > > > >> qcm6490. Even found the message again: > > > > > > >> > > > > > > >>> well, since it is a firmware thing, you might want to emphasise that. > > > > > > >>> So from my POV qcm6490 makes more sense > > > > > > >> > > > > > > >> But yeah since it's likely that sc7280 firmware behaves the same as > > > > > > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case > > > > > > >> we change it later :) I'll send a v2 with those changes. > > > > > > > > > > > > > > Worst case we end up with sc7280 which has yet another slightly > > > > > > > different UCSI / PMIC GLINK implementation, but the compatible string > > > > > > > is already taken. > > > > > > > I still suppose that this should be a qcm6490-related string. > > > > > > Right, let's keep qcm then > > > > > > > > > > Ack from my side also. Thanks for the feedback! > > > > > > > > This doesn't apply to my tree, where should it be going through? > > > > > > As far as I can see the dependency for the driver commit 1d103d6af241 > > > ("usb: typec: ucsi: fix UCSI on buggy Qualcomm devices") was applied to > > > Bjorn's qcom tree, so 2/3 should also go there then. > > > > > > Patch 3/3 (arm64 dts) definitely also Bjorn's qcom tree. > > > > > > So that leaves patch 1/3 which Bjorn can probably pick up as well but > > > looking at git log you also picked up some for that file in the past, > > > dunno. > > > > Ok, for any remaining ones that want to be merged before 6.8-rc1 is out, > > feel free to add my: > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > > > If they don't get picked up by 6.8-rc1, feel free to rebase and send it > > for me to take through my tree. > > Hi Greg, > > This applies cleanly on -next as of next-20240206 still. > > Could you please pick it up for v6.9? I can also send a v2 with only > the two remaining patches (dts was applied to qcom by Bjorn already). v2 with just the remaining patches would be great, thanks. greg k-h
This series adds all the necessary bits to enable USB-C role switching, charger and fuel gauge (all via pmic-glink) on Fairphone 5. One thing that could be made different is the pmic-glink compatible. I've chosen to use qcm6490 compatible for it and not sc7280 since there's plenty of firmware variety on sc7280-based platforms and they might require different quirks in the future, so limit this PDOS quirk to just qcm6490 for now. If someone thinks it should be qcom,sc7280-pmic-glink, please let me know :) Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- Luca Weiss (3): dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible usb: typec: ucsi: Add qcm6490-pmic-glink as needing PDOS quirk arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMIC GLINK .../bindings/soc/qcom/qcom,pmic-glink.yaml | 1 + arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 46 +++++++++++++++++++++- arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 +++++++++ drivers/usb/typec/ucsi/ucsi_glink.c | 1 + 4 files changed, 66 insertions(+), 1 deletion(-) --- base-commit: 76fbb7732259f4c970998d6978d72177658a783a change-id: 20231220-fp5-pmic-glink-b01d4fa1c7ea Best regards,