| Message ID | 20240413064225.39643-1-jenneron@postmarketos.org |
|---|---|
| Headers | show |
| Series | soundwire: qcom: disable stop clock on 1.3.0 and below | expand |
On 13/04/2024 07:42, Anton Bambura wrote: > This patch returns back the behavior of disabling stop clock on soundwire > 1.3.0 and below which seems to have been altered by accident which > results in broken audio on sdm845 + wcd9340. For example, on AYN Odin and > Lenovo Yoga C630 devices. > > Fixes: 4830bfa2c812 ("soundwire: qcom: set clk stop need reset flag at runtime") > Signed-off-by: Anton Bambura <jenneron@postmarketos.org> > --- > drivers/soundwire/qcom.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c > index a1e2d6c98186..bc03484a28e8 100644 > --- a/drivers/soundwire/qcom.c > +++ b/drivers/soundwire/qcom.c > @@ -628,6 +628,9 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus) > } > } > > + if (ctrl->version <= SWRM_VERSION_1_3_0) > + ctrl->clock_stop_not_supported = true; > + This is not the right fix, this can be determined from codec clk_stop_mode1 flag. can you try this patch: ----------------------------->cut<----------------------------- From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Date: Wed, 17 Apr 2024 12:38:49 +0100 Subject: [PATCH] ASoC: codecs: wsa881x: set clk_stop_mode1 flag WSA881x codecs do not retain the state while clock is stopped, so mark this with clk_stop_mode1 flag. Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/codecs/wsa881x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index 3c025dabaf7a..1253695bebd8 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -1155,6 +1155,7 @@ static int wsa881x_probe(struct sdw_slave *pdev, pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0); pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop; pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + pdev->prop.clk_stop_mode1 = true; gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val); wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
Hi Srini, On Wed, Apr 17, 2024 at 6:43 AM Srinivas Kandagatla <srinivas.kandagatla@linaro.org> wrote: > > This is not the right fix, this can be determined from codec > clk_stop_mode1 flag. > > can you try this patch: > > ----------------------------->cut<----------------------------- > From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Date: Wed, 17 Apr 2024 12:38:49 +0100 > Subject: [PATCH] ASoC: codecs: wsa881x: set clk_stop_mode1 flag > > WSA881x codecs do not retain the state while clock is stopped, so mark > this with clk_stop_mode1 flag. > > Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > sound/soc/codecs/wsa881x.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c > index 3c025dabaf7a..1253695bebd8 100644 > --- a/sound/soc/codecs/wsa881x.c > +++ b/sound/soc/codecs/wsa881x.c > @@ -1155,6 +1155,7 @@ static int wsa881x_probe(struct sdw_slave *pdev, > pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0); > pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop; > pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; > + pdev->prop.clk_stop_mode1 = true; > gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val); > > wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config); > -- > 2.21.0 > ----------------------------->cut<----------------------------- > > > thanks, > Srini > > > if (!found) { > > qcom_swrm_set_slave_dev_num(bus, NULL, i); > > sdw_slave_add(bus, &id, NULL); > I tested it here on my c630 and can confirm that your patch does fix the audio as well.