diff mbox series

[06/10] arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO

Message ID 20240525-sc8180x-usb-mp-v1-6-60a904392438@quicinc.com
State Accepted
Commit c8d8e936bc820eaad0ca725ac0456f4839e50ad3
Headers show
Series arm64: dts: qcom: sc8180x: Enable the USB multiport controller | expand

Commit Message

Bjorn Andersson May 25, 2024, 6:03 p.m. UTC
From: Bjorn Andersson <quic_bjorande@quicinc.com>

The SC8180X comes with two PMC8180 PMICs, with the GPIO block being used
to control VBUS supply of the second USB multiport port.

Rename the GPIO controller in the first PMC8180 to match the schematics
and define this second controller.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Dmitry Baryshkov May 25, 2024, 8:15 p.m. UTC | #1
On Sat, May 25, 2024 at 11:03:59AM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <quic_bjorande@quicinc.com>
> 
> The SC8180X comes with two PMC8180 PMICs, with the GPIO block being used
> to control VBUS supply of the second USB multiport port.
> 
> Rename the GPIO controller in the first PMC8180 to match the schematics
> and define this second controller.
> 
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
index ddc84282f142..95656b5ed481 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
@@ -141,11 +141,11 @@  rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 		};
 
-		pmc8180_gpios: gpio@c000 {
+		pmc8180_1_gpios: gpio@c000 {
 			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmc8180_gpios 0 0 10>;
+			gpio-ranges = <&pmc8180_1_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -200,11 +200,21 @@  pmic@6 {
 		#size-cells = <0>;
 	};
 
-	pmic@8 {
+	pmc8180_2: pmic@8 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
 		reg = <0x8 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pmc8180_2_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180_2_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmic@a {