diff mbox series

[2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC

Message ID 20240812030045.20831-3-hpchen0nvt@gmail.com
State Superseded
Headers show
Series Add support for nuvoton ma35 nand controller | expand

Commit Message

Hui-Ping Chen Aug. 12, 2024, 3 a.m. UTC
Nuvoton MA35 SoCs NAND Flash Interface Controller
supports 2KB, 4KB and 8KB page size, and up to 8-bit,
12-bit, and 24-bit hardware ECC calculation circuit
to protect data communication.

Signed-off-by: Hui-Ping Chen <hpchen0nvt@gmail.com>
---
 drivers/mtd/nand/raw/Kconfig               |    8 +
 drivers/mtd/nand/raw/Makefile              |    1 +
 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c | 1109 ++++++++++++++++++++
 3 files changed, 1118 insertions(+)
 create mode 100644 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c

Comments

Krzysztof Kozlowski Aug. 12, 2024, 6:30 a.m. UTC | #1
On 12/08/2024 05:00, Hui-Ping Chen wrote:
> Nuvoton MA35 SoCs NAND Flash Interface Controller
> supports 2KB, 4KB and 8KB page size, and up to 8-bit,
> 12-bit, and 24-bit hardware ECC calculation circuit
> to protect data communication.
> 
> Signed-off-by: Hui-Ping Chen <hpchen0nvt@gmail.com>
> ---
>  drivers/mtd/nand/raw/Kconfig               |    8 +
>  drivers/mtd/nand/raw/Makefile              |    1 +
>  drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c | 1109 ++++++++++++++++++++
>  3 files changed, 1118 insertions(+)
>  create mode 100644 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 614257308516..932bf2215470 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -448,6 +448,14 @@ config MTD_NAND_RENESAS
>  	  Enables support for the NAND controller found on Renesas R-Car
>  	  Gen3 and RZ/N1 SoC families.
>  
> +config MTD_NAND_NVT_MA35
> +	tristate "Nuvoton MA35 SoC NAND controller"
> +	depends on ARCH_MA35 || COMPILE_TEST
> +	depends on OF
> +	help
> +	  Enables support for the NAND controller found on
> +	  the Nuvoton MA35 series SoCs.
> +
>  comment "Misc"
>  
>  config MTD_SM_COMMON
> diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
> index 25120a4afada..cdfdfee3f5f3 100644
> --- a/drivers/mtd/nand/raw/Makefile
> +++ b/drivers/mtd/nand/raw/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_MTD_NAND_INTEL_LGM)	+= intel-nand-controller.o
>  obj-$(CONFIG_MTD_NAND_ROCKCHIP)		+= rockchip-nand-controller.o
>  obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-nand-controller.o
>  obj-$(CONFIG_MTD_NAND_RENESAS)		+= renesas-nand-controller.o
> +obj-$(CONFIG_MTD_NAND_NVT_MA35)	+= nuvoton_ma35d1_nand.o
>  
>  nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
>  nand-objs += nand_onfi.o
> diff --git a/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
> new file mode 100644
> index 000000000000..7445eb489c38
> --- /dev/null
> +++ b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
> @@ -0,0 +1,1109 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2024 Nuvoton Technology Corp.
> + */
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/rawnand.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +
> +/* NFI DMA Registers */
> +#define MA35_NFI_REG_BUFFER0		(0x000)
> +#define MA35_NFI_REG_DMACTL		(0x400)
> +#define   DMA_EN				BIT(0)
> +#define   DMA_RST				BIT(1)
> +#define   DMA_BUSY				BIT(9)
> +
> +#define MA35_NFI_REG_DMASA		(0x408)
> +#define MA35_NFI_REG_DMABCNT		(0x40C)
> +#define MA35_NFI_REG_DMAINTEN		(0x410)
> +#define MA35_NFI_REG_DMAINTSTS	(0x414)
> +
> +/* NFI Global Registers */
> +#define MA35_NFI_REG_GCTL		(0x800)
> +#define   NAND_EN				BIT(3)
> +#define MA35_NFI_REG_GINTEN		(0x804)
> +#define MA35_NFI_REG_GINTSTS		(0x808)
> +
> +/* NAND-type Flash Registers */
> +#define MA35_NFI_REG_NANDCTL		(0x8A0)
> +#define   SWRST				BIT(0)
> +#define   DMA_W_EN				BIT(1)
> +#define   DMA_R_EN				BIT(2)
> +#define   ECC_CHK				BIT(7)
> +#define   PROT3BEN				BIT(8)
> +#define   PSIZE_2K				(1 << 16)
> +#define   PSIZE_4K				(2 << 16)
> +#define   PSIZE_8K				(3 << 16)
> +#define   PSIZE_MASK				(3 << 16)
> +#define   BCH_T24				BIT(18)
> +#define   BCH_T8				BIT(20)
> +#define   BCH_T12				BIT(21)
> +#define   BCH_MASK				(0x1f << 18)
> +#define   ECC_EN				BIT(23)
> +#define   DISABLE_CS0				BIT(25)
> +
> +#define MA35_NFI_REG_NANDTMCTL	(0x8A4)
> +#define MA35_NFI_REG_NANDINTEN	(0x8A8)
> +#define MA35_NFI_REG_NANDINTSTS	(0x8AC)
> +#define   INT_DMA				BIT(0)
> +#define   INT_ECC				BIT(2)
> +#define   INT_RB0				BIT(10)
> +#define   INT_RB0_STS				BIT(18)
> +
> +#define MA35_NFI_REG_NANDCMD		(0x8B0)
> +#define MA35_NFI_REG_NANDADDR		(0x8B4)
> +#define   ENDADDR				BIT(31)
> +
> +#define MA35_NFI_REG_NANDDATA		(0x8B8)
> +#define MA35_NFI_REG_NANDRACTL	(0x8BC)
> +#define MA35_NFI_REG_NANDECTL		(0x8C0)
> +#define   ENABLE_WP				(0x0)
> +#define   DISABLE_WP				BIT(0)
> +
> +#define MA35_NFI_REG_NANDECCES0	(0x8D0)
> +#define   ECC_STATUS_MASK			(0x3)
> +#define   ECC_ERR_CNT_MASK			(0x1f)
> +
> +#define MA35_NFI_REG_NANDECCES1	(0x8D4)
> +#define MA35_NFI_REG_NANDECCES2	(0x8D8)
> +#define MA35_NFI_REG_NANDECCES3	(0x8DC)
> +
> +/* NAND-type Flash BCH Error Address Registers */
> +#define MA35_NFI_REG_NANDECCEA0	(0x900)
> +#define MA35_NFI_REG_NANDECCEA1	(0x904)
> +#define MA35_NFI_REG_NANDECCEA2	(0x908)
> +#define MA35_NFI_REG_NANDECCEA3	(0x90C)
> +#define MA35_NFI_REG_NANDECCEA4	(0x910)
> +#define MA35_NFI_REG_NANDECCEA5	(0x914)
> +#define MA35_NFI_REG_NANDECCEA6	(0x918)
> +#define MA35_NFI_REG_NANDECCEA7	(0x91C)
> +#define MA35_NFI_REG_NANDECCEA8	(0x920)
> +#define MA35_NFI_REG_NANDECCEA9	(0x924)
> +#define MA35_NFI_REG_NANDECCEA10	(0x928)
> +#define MA35_NFI_REG_NANDECCEA11	(0x92C)
> +
> +/* NAND-type Flash BCH Error Data Registers */
> +#define MA35_NFI_REG_NANDECCED0	(0x960)
> +#define MA35_NFI_REG_NANDECCED1	(0x964)
> +#define MA35_NFI_REG_NANDECCED2	(0x968)
> +#define MA35_NFI_REG_NANDECCED3	(0x96C)
> +#define MA35_NFI_REG_NANDECCED4	(0x970)
> +#define MA35_NFI_REG_NANDECCED5	(0x974)
> +
> +/* NAND-type Flash Redundant Area Registers */
> +#define MA35_NFI_REG_NANDRA0		(0xA00)
> +#define MA35_NFI_REG_NANDRA1		(0xA04)
> +
> +#define SKIP_SPARE_BYTES	4
> +
> +/* BCH algorithm related constants and variables */
> +enum {
> +	eBCH_NONE = 0,
> +	eBCH_T8,
> +	eBCH_T12,
> +	eBCH_T24,
> +	eBCH_CNT
> +} E_BCHALGORITHM;
> +
> +static const int g_i32BCHAlgoIdx[eBCH_CNT] = {BCH_T8, BCH_T8, BCH_T12, BCH_T24};
> +static struct nand_ecclayout_user ma35_nand_oob;

Why this is file-scope?

> +static const int g_i32ParityNum[3][eBCH_CNT] = {


This is not a Linux coding style. Do not send Windows or some other
platform-independent patches to review.


> +	{0,  60,  92,  90},  /* for 2K */
> +	{0, 120, 184, 180},  /* for 4K */
> +	{0, 240, 368, 360},  /* for 8K */
> +};
> +
> +
> +struct ma35_nand_info {
> +	struct nand_controller controller;
> +	struct device *dev;
> +	void __iomem *regs;
> +	int irq;
> +	struct clk *clk;
> +	struct completion complete;
> +
> +	struct mtd_info mtd;
> +	struct nand_chip chip;
> +	struct mtd_partition *parts;
> +	int nr_parts;
> +
> +	int eBCHAlgo;

No, use Linux coding style.

> +	u8 *dma_buf;
> +	spinlock_t dma_lock;
> +	dma_addr_t dma_addr;
> +};
> +
> +static int ma35_ooblayout_ecc(struct mtd_info *mtd, int section,
> +			      struct mtd_oob_region *oobregion)
> +{
> +	struct nand_chip *chip = mtd_to_nand(mtd);
> +	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +
> +	if (section || !ecc->total)
> +		return -ERANGE;
> +
> +	oobregion->length = ecc->total;
> +	oobregion->offset = mtd->oobsize - oobregion->length;
> +
> +	return 0;
> +}

... this code looks poor, really poor.

> +}
> +
> +static int ma35_nfi_correct(struct nand_chip *chip, unsigned long addr)
> +{
> +	struct ma35_nand_info *nand = nand_get_controller_data(chip);
> +	struct mtd_info *mtd = nand_to_mtd(chip);
> +	int uStatus, i, j, i32FieldNum = 0;
> +	int uReportErrCnt = 0;
> +	int uErrorCnt = 0;
> +

More of weird coding style. Use Linux coding style. Patch is for Linux.

> +	if ((readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK) == BCH_T24)
> +		i32FieldNum = mtd->writesize / 1024;
> +	else
> +		i32FieldNum = mtd->writesize / 512;


...

> +static int ma35_nand_probe(struct platform_device *pdev)
> +{
> +	struct ma35_nand_info *nand;
> +	struct nand_chip *chip;
> +	struct mtd_info *mtd;
> +	int retval = 0;
> +
> +	nand = devm_kzalloc(&pdev->dev, sizeof(struct ma35_nand_info), GFP_KERNEL);

sizeof(*)

> +	if (!nand)
> +		return -ENOMEM;
> +
> +	nand_controller_init(&nand->controller);
> +
> +	nand->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(nand->regs))
> +		return PTR_ERR(nand->regs);
> +
> +	nand->dev = &pdev->dev;
> +	chip = &nand->chip;
> +	mtd = nand_to_mtd(chip);
> +	nand_set_controller_data(chip, nand);
> +	nand_set_flash_node(chip, pdev->dev.of_node);
> +
> +	mtd->priv = chip;
> +	mtd->owner = THIS_MODULE;
> +	mtd->dev.parent = &pdev->dev;
> +
> +	nand->clk = of_clk_get(pdev->dev.of_node, 0);

No, no. That's not how you get a clock. Use devm_clk_get().

> +	if (IS_ERR(nand->clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
> +				     "failed to find nand clock\n");
> +
> +	retval = clk_prepare_enable(nand->clk);
> +	if (retval < 0) {
> +		dev_err(&pdev->dev, "Failed to enable clock\n");
> +		return -ENXIO;
> +	}
> +
> +	nand->chip.controller    = &nand->controller;
> +
> +	chip->legacy.cmdfunc     = ma35_nand_command;
> +	chip->legacy.waitfunc    = ma35_waitfunc;
> +	chip->legacy.read_byte   = ma35_nand_read_byte;
> +	chip->legacy.select_chip = ma35_nand_select_chip;
> +	chip->legacy.read_buf    = ma35_read_buf_dma;
> +	chip->legacy.write_buf   = ma35_write_buf_dma;
> +	chip->legacy.dev_ready   = ma35_nand_devready;
> +	chip->legacy.chip_delay  = 25; /* us */
> +
> +	/* Read OOB data first, then HW read page */
> +	chip->ecc.hwctl      = ma35_nand_enable_hwecc;
> +	chip->ecc.calculate  = ma35_nand_calculate_ecc;
> +	chip->ecc.correct    = ma35_nand_correct_data;
> +	chip->ecc.write_page = ma35_nand_write_page_hwecc;
> +	chip->ecc.read_page  = ma35_nand_read_page_hwecc_oob_first;
> +	chip->ecc.read_oob   = ma35_nand_read_oob_hwecc;
> +	chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
> +
> +	ma35_nand_initialize(nand);
> +	platform_set_drvdata(pdev, nand);
> +
> +	nand->controller.ops = &ma35_nand_controller_ops;
> +
> +	nand->irq = platform_get_irq(pdev, 0);
> +	if (nand->irq < 0) {
> +		dev_err(&pdev->dev, "failed to get platform irq\n");

Syntax is return dev_err_probe

> +		return -EINVAL;
> +	}
> +
> +	if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
> +			IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
> +		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
> +		return -ENXIO;
> +	}
> +
> +	retval = nand_scan(chip, 1);
> +	if (retval)
> +		return retval;
> +
> +	if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
> +		nand_cleanup(chip);
> +		devm_kfree(&pdev->dev, nand);
> +		return retval;
> +	}
> +
> +	pr_info("ma35-nfi: registered successfully! mtdid=%s\n", mtd->name);

Drop, does not help.

Drivers do not use pr_xxx anyway. Why your code is so inconsistent? It's
like random junk glued together.

> +
> +	return retval;
> +}
> +
> +static void ma35_nand_remove(struct platform_device *pdev)
> +{
> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
> +	struct nand_chip *chip = &nand->chip;
> +	int ret;
> +
> +	ret = mtd_device_unregister(nand_to_mtd(chip));
> +	WARN_ON(ret);
> +	nand_cleanup(chip);
> +
> +	clk_disable_unprepare(nand->clk);
> +
> +	kfree(nand);
> +	platform_set_drvdata(pdev, NULL);
> +}
> +
> +/* PM Support */
> +#ifdef CONFIG_PM
> +static int ma35_nand_suspend(struct platform_device *pdev, pm_message_t pm)
> +{
> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
> +	unsigned long timeo = jiffies + HZ/2;
> +
> +	/* wait DMAC to ready */
> +	while (1) {
> +		if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
> +			break;
> +		if (time_after(jiffies, timeo))
> +			return -ETIMEDOUT;
> +	}
> +
> +	clk_disable(nand->clk);
> +
> +	return 0;
> +}
> +
> +static int ma35_nand_resume(struct platform_device *pdev)
> +{
> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
> +
> +	clk_enable(nand->clk);
> +	ma35_nand_hwecc_init(nand);
> +	ma35_nand_dmac_init(nand);
> +
> +	return 0;
> +}
> +
> +#else
> +#define ma35_nand_suspend NULL
> +#define ma35_nand_resume NULL
> +#endif
> +
> +static const struct of_device_id ma35_nfi_of_match[] = {
> +	{ .compatible = "nuvoton,ma35d1-nand" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ma35_nfi_of_match);
> +
> +static struct platform_driver ma35_nand_driver = {
> +		.driver = {
> +		.name   = "ma35d1-nand",
> +		.owner  = THIS_MODULE,
> +		.of_match_table = of_match_ptr(ma35_nfi_of_match),

Drop of_match_ptr. You have warnings here.

> +		},
> +		.probe = ma35_nand_probe,
> +		.remove_new = ma35_nand_remove,
> +		.suspend = ma35_nand_suspend,
> +		.resume = ma35_nand_resume,
> +};
> +
> +static int __init ma35_nand_init(void)
> +{
> +	int ret;
> +
> +	pr_info("ma35 mtd nand driver\n");

NAK, drop, useless and really pointless.

> +
> +	ret = platform_driver_register(&ma35_nand_driver);
> +	if (ret) {
> +		pr_warn("nand: failed to add device driver %s\n",
> +			ma35_nand_driver.driver.name);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static void __exit ma35_nand_exit(void)
> +{
> +	platform_driver_unregister(&ma35_nand_driver);
> +	pr_info("nand: unregistered successfully!\n");

NAK, drop, useless and really pointless.

> +}
> +
> +module_init(ma35_nand_init);
> +module_exit(ma35_nand_exit);

Do not open-code these functions, there are wrappers for this.

> +
> +MODULE_DESCRIPTION("Nuvoton ma35 NAND driver");
> +MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
> +MODULE_LICENSE("GPL");

Best regards,
Krzysztof
Hui-Ping Chen Aug. 12, 2024, 9:10 a.m. UTC | #2
Dear Krzysztof,

Thank you for your reply.



On 2024/8/12 下午 02:30, Krzysztof Kozlowski wrote:
> On 12/08/2024 05:00, Hui-Ping Chen wrote:
>> Nuvoton MA35 SoCs NAND Flash Interface Controller
>> supports 2KB, 4KB and 8KB page size, and up to 8-bit,
>> 12-bit, and 24-bit hardware ECC calculation circuit
>> to protect data communication.
>>
>> Signed-off-by: Hui-Ping Chen <hpchen0nvt@gmail.com>
>> ---
>>   drivers/mtd/nand/raw/Kconfig               |    8 +
>>   drivers/mtd/nand/raw/Makefile              |    1 +
>>   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c | 1109 ++++++++++++++++++++
>>   3 files changed, 1118 insertions(+)
>>   create mode 100644 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>>
>> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
>> index 614257308516..932bf2215470 100644
>> --- a/drivers/mtd/nand/raw/Kconfig
>> +++ b/drivers/mtd/nand/raw/Kconfig
>> @@ -448,6 +448,14 @@ config MTD_NAND_RENESAS
>>   	  Enables support for the NAND controller found on Renesas R-Car
>>   	  Gen3 and RZ/N1 SoC families.
>>   
>> +config MTD_NAND_NVT_MA35
>> +	tristate "Nuvoton MA35 SoC NAND controller"
>> +	depends on ARCH_MA35 || COMPILE_TEST
>> +	depends on OF
>> +	help
>> +	  Enables support for the NAND controller found on
>> +	  the Nuvoton MA35 series SoCs.
>> +
>>   comment "Misc"
>>   
>>   config MTD_SM_COMMON
>> diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
>> index 25120a4afada..cdfdfee3f5f3 100644
>> --- a/drivers/mtd/nand/raw/Makefile
>> +++ b/drivers/mtd/nand/raw/Makefile
>> @@ -57,6 +57,7 @@ obj-$(CONFIG_MTD_NAND_INTEL_LGM)	+= intel-nand-controller.o
>>   obj-$(CONFIG_MTD_NAND_ROCKCHIP)		+= rockchip-nand-controller.o
>>   obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-nand-controller.o
>>   obj-$(CONFIG_MTD_NAND_RENESAS)		+= renesas-nand-controller.o
>> +obj-$(CONFIG_MTD_NAND_NVT_MA35)	+= nuvoton_ma35d1_nand.o
>>   
>>   nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
>>   nand-objs += nand_onfi.o
>> diff --git a/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>> new file mode 100644
>> index 000000000000..7445eb489c38
>> --- /dev/null
>> +++ b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
>> @@ -0,0 +1,1109 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2024 Nuvoton Technology Corp.
>> + */
>> +#include <linux/slab.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mtd/rawnand.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dmaengine.h>
>> +
>> +/* NFI DMA Registers */
>> +#define MA35_NFI_REG_BUFFER0		(0x000)
>> +#define MA35_NFI_REG_DMACTL		(0x400)
>> +#define   DMA_EN				BIT(0)
>> +#define   DMA_RST				BIT(1)
>> +#define   DMA_BUSY				BIT(9)
>> +
>> +#define MA35_NFI_REG_DMASA		(0x408)
>> +#define MA35_NFI_REG_DMABCNT		(0x40C)
>> +#define MA35_NFI_REG_DMAINTEN		(0x410)
>> +#define MA35_NFI_REG_DMAINTSTS	(0x414)
>> +
>> +/* NFI Global Registers */
>> +#define MA35_NFI_REG_GCTL		(0x800)
>> +#define   NAND_EN				BIT(3)
>> +#define MA35_NFI_REG_GINTEN		(0x804)
>> +#define MA35_NFI_REG_GINTSTS		(0x808)
>> +
>> +/* NAND-type Flash Registers */
>> +#define MA35_NFI_REG_NANDCTL		(0x8A0)
>> +#define   SWRST				BIT(0)
>> +#define   DMA_W_EN				BIT(1)
>> +#define   DMA_R_EN				BIT(2)
>> +#define   ECC_CHK				BIT(7)
>> +#define   PROT3BEN				BIT(8)
>> +#define   PSIZE_2K				(1 << 16)
>> +#define   PSIZE_4K				(2 << 16)
>> +#define   PSIZE_8K				(3 << 16)
>> +#define   PSIZE_MASK				(3 << 16)
>> +#define   BCH_T24				BIT(18)
>> +#define   BCH_T8				BIT(20)
>> +#define   BCH_T12				BIT(21)
>> +#define   BCH_MASK				(0x1f << 18)
>> +#define   ECC_EN				BIT(23)
>> +#define   DISABLE_CS0				BIT(25)
>> +
>> +#define MA35_NFI_REG_NANDTMCTL	(0x8A4)
>> +#define MA35_NFI_REG_NANDINTEN	(0x8A8)
>> +#define MA35_NFI_REG_NANDINTSTS	(0x8AC)
>> +#define   INT_DMA				BIT(0)
>> +#define   INT_ECC				BIT(2)
>> +#define   INT_RB0				BIT(10)
>> +#define   INT_RB0_STS				BIT(18)
>> +
>> +#define MA35_NFI_REG_NANDCMD		(0x8B0)
>> +#define MA35_NFI_REG_NANDADDR		(0x8B4)
>> +#define   ENDADDR				BIT(31)
>> +
>> +#define MA35_NFI_REG_NANDDATA		(0x8B8)
>> +#define MA35_NFI_REG_NANDRACTL	(0x8BC)
>> +#define MA35_NFI_REG_NANDECTL		(0x8C0)
>> +#define   ENABLE_WP				(0x0)
>> +#define   DISABLE_WP				BIT(0)
>> +
>> +#define MA35_NFI_REG_NANDECCES0	(0x8D0)
>> +#define   ECC_STATUS_MASK			(0x3)
>> +#define   ECC_ERR_CNT_MASK			(0x1f)
>> +
>> +#define MA35_NFI_REG_NANDECCES1	(0x8D4)
>> +#define MA35_NFI_REG_NANDECCES2	(0x8D8)
>> +#define MA35_NFI_REG_NANDECCES3	(0x8DC)
>> +
>> +/* NAND-type Flash BCH Error Address Registers */
>> +#define MA35_NFI_REG_NANDECCEA0	(0x900)
>> +#define MA35_NFI_REG_NANDECCEA1	(0x904)
>> +#define MA35_NFI_REG_NANDECCEA2	(0x908)
>> +#define MA35_NFI_REG_NANDECCEA3	(0x90C)
>> +#define MA35_NFI_REG_NANDECCEA4	(0x910)
>> +#define MA35_NFI_REG_NANDECCEA5	(0x914)
>> +#define MA35_NFI_REG_NANDECCEA6	(0x918)
>> +#define MA35_NFI_REG_NANDECCEA7	(0x91C)
>> +#define MA35_NFI_REG_NANDECCEA8	(0x920)
>> +#define MA35_NFI_REG_NANDECCEA9	(0x924)
>> +#define MA35_NFI_REG_NANDECCEA10	(0x928)
>> +#define MA35_NFI_REG_NANDECCEA11	(0x92C)
>> +
>> +/* NAND-type Flash BCH Error Data Registers */
>> +#define MA35_NFI_REG_NANDECCED0	(0x960)
>> +#define MA35_NFI_REG_NANDECCED1	(0x964)
>> +#define MA35_NFI_REG_NANDECCED2	(0x968)
>> +#define MA35_NFI_REG_NANDECCED3	(0x96C)
>> +#define MA35_NFI_REG_NANDECCED4	(0x970)
>> +#define MA35_NFI_REG_NANDECCED5	(0x974)
>> +
>> +/* NAND-type Flash Redundant Area Registers */
>> +#define MA35_NFI_REG_NANDRA0		(0xA00)
>> +#define MA35_NFI_REG_NANDRA1		(0xA04)
>> +
>> +#define SKIP_SPARE_BYTES	4
>> +
>> +/* BCH algorithm related constants and variables */
>> +enum {
>> +	eBCH_NONE = 0,
>> +	eBCH_T8,
>> +	eBCH_T12,
>> +	eBCH_T24,
>> +	eBCH_CNT
>> +} E_BCHALGORITHM;
>> +
>> +static const int g_i32BCHAlgoIdx[eBCH_CNT] = {BCH_T8, BCH_T8, BCH_T12, BCH_T24};
>> +static struct nand_ecclayout_user ma35_nand_oob;
> Why this is file-scope?

I will remove the `static`.



>> +static const int g_i32ParityNum[3][eBCH_CNT] = {
>
> This is not a Linux coding style. Do not send Windows or some other
> platform-independent patches to review.
>
This is my mistake. I should have modified it instead of copying it 
directly.

I will fix it.



>> +	{0,  60,  92,  90},  /* for 2K */
>> +	{0, 120, 184, 180},  /* for 4K */
>> +	{0, 240, 368, 360},  /* for 8K */
>> +};
>> +
>> +
>> +struct ma35_nand_info {
>> +	struct nand_controller controller;
>> +	struct device *dev;
>> +	void __iomem *regs;
>> +	int irq;
>> +	struct clk *clk;
>> +	struct completion complete;
>> +
>> +	struct mtd_info mtd;
>> +	struct nand_chip chip;
>> +	struct mtd_partition *parts;
>> +	int nr_parts;
>> +
>> +	int eBCHAlgo;
> No, use Linux coding style.

I will fix it.



>> +	u8 *dma_buf;
>> +	spinlock_t dma_lock;
>> +	dma_addr_t dma_addr;
>> +};
>> +
>> +static int ma35_ooblayout_ecc(struct mtd_info *mtd, int section,
>> +			      struct mtd_oob_region *oobregion)
>> +{
>> +	struct nand_chip *chip = mtd_to_nand(mtd);
>> +	struct nand_ecc_ctrl *ecc = &chip->ecc;
>> +
>> +	if (section || !ecc->total)
>> +		return -ERANGE;
>> +
>> +	oobregion->length = ecc->total;
>> +	oobregion->offset = mtd->oobsize - oobregion->length;
>> +
>> +	return 0;
>> +}
> ... this code looks poor, really poor.

I will rewrite this function.



>> +}
>> +
>> +static int ma35_nfi_correct(struct nand_chip *chip, unsigned long addr)
>> +{
>> +	struct ma35_nand_info *nand = nand_get_controller_data(chip);
>> +	struct mtd_info *mtd = nand_to_mtd(chip);
>> +	int uStatus, i, j, i32FieldNum = 0;
>> +	int uReportErrCnt = 0;
>> +	int uErrorCnt = 0;
>> +
> More of weird coding style. Use Linux coding style. Patch is for Linux.

I will fix it.



>> +	if ((readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK) == BCH_T24)
>> +		i32FieldNum = mtd->writesize / 1024;
>> +	else
>> +		i32FieldNum = mtd->writesize / 512;
>
> ...

I will fix it.



>> +static int ma35_nand_probe(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand;
>> +	struct nand_chip *chip;
>> +	struct mtd_info *mtd;
>> +	int retval = 0;
>> +
>> +	nand = devm_kzalloc(&pdev->dev, sizeof(struct ma35_nand_info), GFP_KERNEL);
> sizeof(*)

I will fix it.



>> +	if (!nand)
>> +		return -ENOMEM;
>> +
>> +	nand_controller_init(&nand->controller);
>> +
>> +	nand->regs = devm_platform_ioremap_resource(pdev, 0);
>> +	if (IS_ERR(nand->regs))
>> +		return PTR_ERR(nand->regs);
>> +
>> +	nand->dev = &pdev->dev;
>> +	chip = &nand->chip;
>> +	mtd = nand_to_mtd(chip);
>> +	nand_set_controller_data(chip, nand);
>> +	nand_set_flash_node(chip, pdev->dev.of_node);
>> +
>> +	mtd->priv = chip;
>> +	mtd->owner = THIS_MODULE;
>> +	mtd->dev.parent = &pdev->dev;
>> +
>> +	nand->clk = of_clk_get(pdev->dev.of_node, 0);
> No, no. That's not how you get a clock. Use devm_clk_get().

I will fix it.



>> +	if (IS_ERR(nand->clk))
>> +		return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
>> +				     "failed to find nand clock\n");
>> +
>> +	retval = clk_prepare_enable(nand->clk);
>> +	if (retval < 0) {
>> +		dev_err(&pdev->dev, "Failed to enable clock\n");
>> +		return -ENXIO;
>> +	}
>> +
>> +	nand->chip.controller    = &nand->controller;
>> +
>> +	chip->legacy.cmdfunc     = ma35_nand_command;
>> +	chip->legacy.waitfunc    = ma35_waitfunc;
>> +	chip->legacy.read_byte   = ma35_nand_read_byte;
>> +	chip->legacy.select_chip = ma35_nand_select_chip;
>> +	chip->legacy.read_buf    = ma35_read_buf_dma;
>> +	chip->legacy.write_buf   = ma35_write_buf_dma;
>> +	chip->legacy.dev_ready   = ma35_nand_devready;
>> +	chip->legacy.chip_delay  = 25; /* us */
>> +
>> +	/* Read OOB data first, then HW read page */
>> +	chip->ecc.hwctl      = ma35_nand_enable_hwecc;
>> +	chip->ecc.calculate  = ma35_nand_calculate_ecc;
>> +	chip->ecc.correct    = ma35_nand_correct_data;
>> +	chip->ecc.write_page = ma35_nand_write_page_hwecc;
>> +	chip->ecc.read_page  = ma35_nand_read_page_hwecc_oob_first;
>> +	chip->ecc.read_oob   = ma35_nand_read_oob_hwecc;
>> +	chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
>> +
>> +	ma35_nand_initialize(nand);
>> +	platform_set_drvdata(pdev, nand);
>> +
>> +	nand->controller.ops = &ma35_nand_controller_ops;
>> +
>> +	nand->irq = platform_get_irq(pdev, 0);
>> +	if (nand->irq < 0) {
>> +		dev_err(&pdev->dev, "failed to get platform irq\n");
> Syntax is return dev_err_probe

I will fix it.



>> +		return -EINVAL;
>> +	}
>> +
>> +	if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
>> +			IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
>> +		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
>> +		return -ENXIO;
>> +	}
>> +
>> +	retval = nand_scan(chip, 1);
>> +	if (retval)
>> +		return retval;
>> +
>> +	if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
>> +		nand_cleanup(chip);
>> +		devm_kfree(&pdev->dev, nand);
>> +		return retval;
>> +	}
>> +
>> +	pr_info("ma35-nfi: registered successfully! mtdid=%s\n", mtd->name);
> Drop, does not help.
>
> Drivers do not use pr_xxx anyway. Why your code is so inconsistent? It's
> like random junk glued together.

I will remove all the `pr_info`.



>> +
>> +	return retval;
>> +}
>> +
>> +static void ma35_nand_remove(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +	struct nand_chip *chip = &nand->chip;
>> +	int ret;
>> +
>> +	ret = mtd_device_unregister(nand_to_mtd(chip));
>> +	WARN_ON(ret);
>> +	nand_cleanup(chip);
>> +
>> +	clk_disable_unprepare(nand->clk);
>> +
>> +	kfree(nand);
>> +	platform_set_drvdata(pdev, NULL);
>> +}
>> +
>> +/* PM Support */
>> +#ifdef CONFIG_PM
>> +static int ma35_nand_suspend(struct platform_device *pdev, pm_message_t pm)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +	unsigned long timeo = jiffies + HZ/2;
>> +
>> +	/* wait DMAC to ready */
>> +	while (1) {
>> +		if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
>> +			break;
>> +		if (time_after(jiffies, timeo))
>> +			return -ETIMEDOUT;
>> +	}
>> +
>> +	clk_disable(nand->clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ma35_nand_resume(struct platform_device *pdev)
>> +{
>> +	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
>> +
>> +	clk_enable(nand->clk);
>> +	ma35_nand_hwecc_init(nand);
>> +	ma35_nand_dmac_init(nand);
>> +
>> +	return 0;
>> +}
>> +
>> +#else
>> +#define ma35_nand_suspend NULL
>> +#define ma35_nand_resume NULL
>> +#endif
>> +
>> +static const struct of_device_id ma35_nfi_of_match[] = {
>> +	{ .compatible = "nuvoton,ma35d1-nand" },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, ma35_nfi_of_match);
>> +
>> +static struct platform_driver ma35_nand_driver = {
>> +		.driver = {
>> +		.name   = "ma35d1-nand",
>> +		.owner  = THIS_MODULE,
>> +		.of_match_table = of_match_ptr(ma35_nfi_of_match),
> Drop of_match_ptr. You have warnings here.

Okay. I will remove it.



>> +		},
>> +		.probe = ma35_nand_probe,
>> +		.remove_new = ma35_nand_remove,
>> +		.suspend = ma35_nand_suspend,
>> +		.resume = ma35_nand_resume,
>> +};
>> +
>> +static int __init ma35_nand_init(void)
>> +{
>> +	int ret;
>> +
>> +	pr_info("ma35 mtd nand driver\n");
> NAK, drop, useless and really pointless.

I will remove all the `pr_info`.



>> +
>> +	ret = platform_driver_register(&ma35_nand_driver);
>> +	if (ret) {
>> +		pr_warn("nand: failed to add device driver %s\n",
>> +			ma35_nand_driver.driver.name);
>> +		return ret;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static void __exit ma35_nand_exit(void)
>> +{
>> +	platform_driver_unregister(&ma35_nand_driver);
>> +	pr_info("nand: unregistered successfully!\n");
> NAK, drop, useless and really pointless.

I will remove all the `pr_info`.



>> +}
>> +
>> +module_init(ma35_nand_init);
>> +module_exit(ma35_nand_exit);
> Do not open-code these functions, there are wrappers for this.

Okay. I will remove it.



>> +
>> +MODULE_DESCRIPTION("Nuvoton ma35 NAND driver");
>> +MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
>> +MODULE_LICENSE("GPL");
> Best regards,
> Krzysztof


Best regards,

Hui-Ping Chen
Krzysztof Kozlowski Aug. 12, 2024, 9:13 a.m. UTC | #3
On 12/08/2024 11:10, Hui-Ping Chen wrote:
>>> +
>>> +/* NAND-type Flash BCH Error Data Registers */
>>> +#define MA35_NFI_REG_NANDECCED0	(0x960)
>>> +#define MA35_NFI_REG_NANDECCED1	(0x964)
>>> +#define MA35_NFI_REG_NANDECCED2	(0x968)
>>> +#define MA35_NFI_REG_NANDECCED3	(0x96C)
>>> +#define MA35_NFI_REG_NANDECCED4	(0x970)
>>> +#define MA35_NFI_REG_NANDECCED5	(0x974)
>>> +
>>> +/* NAND-type Flash Redundant Area Registers */
>>> +#define MA35_NFI_REG_NANDRA0		(0xA00)
>>> +#define MA35_NFI_REG_NANDRA1		(0xA04)
>>> +
>>> +#define SKIP_SPARE_BYTES	4
>>> +
>>> +/* BCH algorithm related constants and variables */
>>> +enum {
>>> +	eBCH_NONE = 0,
>>> +	eBCH_T8,
>>> +	eBCH_T12,
>>> +	eBCH_T24,
>>> +	eBCH_CNT
>>> +} E_BCHALGORITHM;
>>> +
>>> +static const int g_i32BCHAlgoIdx[eBCH_CNT] = {BCH_T8, BCH_T8, BCH_T12, BCH_T24};
>>> +static struct nand_ecclayout_user ma35_nand_oob;
>> Why this is file-scope?
> 
> I will remove the `static`.

No, why this cannot be instance dependent? Quick looks says it could.
And should.


Best regards,
Krzysztof
kernel test robot Aug. 12, 2024, 12:52 p.m. UTC | #4
Hi Hui-Ping,

kernel test robot noticed the following build warnings:

[auto build test WARNING on mtd/nand/next]
[also build test WARNING on linus/master v6.11-rc3 next-20240812]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Hui-Ping-Chen/dt-bindings-mtd-nuvoton-ma35d1-nand-add-new-bindings/20240812-110259
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
patch link:    https://lore.kernel.org/r/20240812030045.20831-3-hpchen0nvt%40gmail.com
patch subject: [PATCH 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC
config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20240812/202408122007.quTiDXPR-lkp@intel.com/config)
compiler: clang version 18.1.5 (https://github.com/llvm/llvm-project 617a15a9eac96088ae5e9134248d8236e34b91b1)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240812/202408122007.quTiDXPR-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202408122007.quTiDXPR-lkp@intel.com/

All warnings (new ones prefixed by >>):

>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:991:29: warning: cast from 'irqreturn_t (*)(int, struct ma35_nand_info *)' (aka 'enum irqreturn (*)(int, struct ma35_nand_info *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Wcast-function-type-strict]
     991 |         if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   1 warning generated.


vim +991 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c

   921	
   922	static int ma35_nand_probe(struct platform_device *pdev)
   923	{
   924		struct ma35_nand_info *nand;
   925		struct nand_chip *chip;
   926		struct mtd_info *mtd;
   927		int retval = 0;
   928	
   929		nand = devm_kzalloc(&pdev->dev, sizeof(struct ma35_nand_info), GFP_KERNEL);
   930		if (!nand)
   931			return -ENOMEM;
   932	
   933		nand_controller_init(&nand->controller);
   934	
   935		nand->regs = devm_platform_ioremap_resource(pdev, 0);
   936		if (IS_ERR(nand->regs))
   937			return PTR_ERR(nand->regs);
   938	
   939		nand->dev = &pdev->dev;
   940		chip = &nand->chip;
   941		mtd = nand_to_mtd(chip);
   942		nand_set_controller_data(chip, nand);
   943		nand_set_flash_node(chip, pdev->dev.of_node);
   944	
   945		mtd->priv = chip;
   946		mtd->owner = THIS_MODULE;
   947		mtd->dev.parent = &pdev->dev;
   948	
   949		nand->clk = of_clk_get(pdev->dev.of_node, 0);
   950		if (IS_ERR(nand->clk))
   951			return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
   952					     "failed to find nand clock\n");
   953	
   954		retval = clk_prepare_enable(nand->clk);
   955		if (retval < 0) {
   956			dev_err(&pdev->dev, "Failed to enable clock\n");
   957			return -ENXIO;
   958		}
   959	
   960		nand->chip.controller    = &nand->controller;
   961	
   962		chip->legacy.cmdfunc     = ma35_nand_command;
   963		chip->legacy.waitfunc    = ma35_waitfunc;
   964		chip->legacy.read_byte   = ma35_nand_read_byte;
   965		chip->legacy.select_chip = ma35_nand_select_chip;
   966		chip->legacy.read_buf    = ma35_read_buf_dma;
   967		chip->legacy.write_buf   = ma35_write_buf_dma;
   968		chip->legacy.dev_ready   = ma35_nand_devready;
   969		chip->legacy.chip_delay  = 25; /* us */
   970	
   971		/* Read OOB data first, then HW read page */
   972		chip->ecc.hwctl      = ma35_nand_enable_hwecc;
   973		chip->ecc.calculate  = ma35_nand_calculate_ecc;
   974		chip->ecc.correct    = ma35_nand_correct_data;
   975		chip->ecc.write_page = ma35_nand_write_page_hwecc;
   976		chip->ecc.read_page  = ma35_nand_read_page_hwecc_oob_first;
   977		chip->ecc.read_oob   = ma35_nand_read_oob_hwecc;
   978		chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
   979	
   980		ma35_nand_initialize(nand);
   981		platform_set_drvdata(pdev, nand);
   982	
   983		nand->controller.ops = &ma35_nand_controller_ops;
   984	
   985		nand->irq = platform_get_irq(pdev, 0);
   986		if (nand->irq < 0) {
   987			dev_err(&pdev->dev, "failed to get platform irq\n");
   988			return -EINVAL;
   989		}
   990	
 > 991		if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
   992				IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
   993			dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
   994			return -ENXIO;
   995		}
   996	
   997		retval = nand_scan(chip, 1);
   998		if (retval)
   999			return retval;
  1000	
  1001		if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
  1002			nand_cleanup(chip);
  1003			devm_kfree(&pdev->dev, nand);
  1004			return retval;
  1005		}
  1006	
  1007		pr_info("ma35-nfi: registered successfully! mtdid=%s\n", mtd->name);
  1008	
  1009		return retval;
  1010	}
  1011
kernel test robot Aug. 13, 2024, 9:59 p.m. UTC | #5
Hi Hui-Ping,

kernel test robot noticed the following build warnings:

[auto build test WARNING on mtd/nand/next]
[also build test WARNING on linus/master v6.11-rc3 next-20240813]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Hui-Ping-Chen/dt-bindings-mtd-nuvoton-ma35d1-nand-add-new-bindings/20240812-110259
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
patch link:    https://lore.kernel.org/r/20240812030045.20831-3-hpchen0nvt%40gmail.com
patch subject: [PATCH 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC
config: arc-randconfig-r133-20240813 (https://download.01.org/0day-ci/archive/20240814/202408140515.pbHkvxZD-lkp@intel.com/config)
compiler: arc-elf-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20240814/202408140515.pbHkvxZD-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202408140515.pbHkvxZD-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:119:3: sparse: sparse: symbol 'E_BCHALGORITHM' was not declared. Should it be static?
>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:333:28: sparse: sparse: cast removes address space '__iomem' of expression
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:348:39: sparse: sparse: cast removes address space '__iomem' of expression
>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:746:41: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *register ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:746:41: sparse:     expected char *register ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:746:41: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:760:18: sparse: sparse: cast removes address space '__iomem' of expression
>> drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:774:32: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:774:32: sparse:     expected char *ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:774:32: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:813:32: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:813:32: sparse:     expected char *ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:813:32: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *register ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     expected char *register ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *register ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     expected char *register ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *register ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     expected char *register ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     got void [noderef] __iomem *
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char *register ptr @@     got void [noderef] __iomem * @@
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     expected char *register ptr
   drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c:516:49: sparse:     got void [noderef] __iomem *

vim +/E_BCHALGORITHM +119 drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c

   111	
   112	/* BCH algorithm related constants and variables */
   113	enum {
   114		eBCH_NONE = 0,
   115		eBCH_T8,
   116		eBCH_T12,
   117		eBCH_T24,
   118		eBCH_CNT
 > 119	} E_BCHALGORITHM;
   120
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 614257308516..932bf2215470 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -448,6 +448,14 @@  config MTD_NAND_RENESAS
 	  Enables support for the NAND controller found on Renesas R-Car
 	  Gen3 and RZ/N1 SoC families.
 
+config MTD_NAND_NVT_MA35
+	tristate "Nuvoton MA35 SoC NAND controller"
+	depends on ARCH_MA35 || COMPILE_TEST
+	depends on OF
+	help
+	  Enables support for the NAND controller found on
+	  the Nuvoton MA35 series SoCs.
+
 comment "Misc"
 
 config MTD_SM_COMMON
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 25120a4afada..cdfdfee3f5f3 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -57,6 +57,7 @@  obj-$(CONFIG_MTD_NAND_INTEL_LGM)	+= intel-nand-controller.o
 obj-$(CONFIG_MTD_NAND_ROCKCHIP)		+= rockchip-nand-controller.o
 obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-nand-controller.o
 obj-$(CONFIG_MTD_NAND_RENESAS)		+= renesas-nand-controller.o
+obj-$(CONFIG_MTD_NAND_NVT_MA35)	+= nuvoton_ma35d1_nand.o
 
 nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
 nand-objs += nand_onfi.o
diff --git a/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
new file mode 100644
index 000000000000..7445eb489c38
--- /dev/null
+++ b/drivers/mtd/nand/raw/nuvoton_ma35d1_nand.c
@@ -0,0 +1,1109 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Nuvoton Technology Corp.
+ */
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+/* NFI DMA Registers */
+#define MA35_NFI_REG_BUFFER0		(0x000)
+#define MA35_NFI_REG_DMACTL		(0x400)
+#define   DMA_EN				BIT(0)
+#define   DMA_RST				BIT(1)
+#define   DMA_BUSY				BIT(9)
+
+#define MA35_NFI_REG_DMASA		(0x408)
+#define MA35_NFI_REG_DMABCNT		(0x40C)
+#define MA35_NFI_REG_DMAINTEN		(0x410)
+#define MA35_NFI_REG_DMAINTSTS	(0x414)
+
+/* NFI Global Registers */
+#define MA35_NFI_REG_GCTL		(0x800)
+#define   NAND_EN				BIT(3)
+#define MA35_NFI_REG_GINTEN		(0x804)
+#define MA35_NFI_REG_GINTSTS		(0x808)
+
+/* NAND-type Flash Registers */
+#define MA35_NFI_REG_NANDCTL		(0x8A0)
+#define   SWRST				BIT(0)
+#define   DMA_W_EN				BIT(1)
+#define   DMA_R_EN				BIT(2)
+#define   ECC_CHK				BIT(7)
+#define   PROT3BEN				BIT(8)
+#define   PSIZE_2K				(1 << 16)
+#define   PSIZE_4K				(2 << 16)
+#define   PSIZE_8K				(3 << 16)
+#define   PSIZE_MASK				(3 << 16)
+#define   BCH_T24				BIT(18)
+#define   BCH_T8				BIT(20)
+#define   BCH_T12				BIT(21)
+#define   BCH_MASK				(0x1f << 18)
+#define   ECC_EN				BIT(23)
+#define   DISABLE_CS0				BIT(25)
+
+#define MA35_NFI_REG_NANDTMCTL	(0x8A4)
+#define MA35_NFI_REG_NANDINTEN	(0x8A8)
+#define MA35_NFI_REG_NANDINTSTS	(0x8AC)
+#define   INT_DMA				BIT(0)
+#define   INT_ECC				BIT(2)
+#define   INT_RB0				BIT(10)
+#define   INT_RB0_STS				BIT(18)
+
+#define MA35_NFI_REG_NANDCMD		(0x8B0)
+#define MA35_NFI_REG_NANDADDR		(0x8B4)
+#define   ENDADDR				BIT(31)
+
+#define MA35_NFI_REG_NANDDATA		(0x8B8)
+#define MA35_NFI_REG_NANDRACTL	(0x8BC)
+#define MA35_NFI_REG_NANDECTL		(0x8C0)
+#define   ENABLE_WP				(0x0)
+#define   DISABLE_WP				BIT(0)
+
+#define MA35_NFI_REG_NANDECCES0	(0x8D0)
+#define   ECC_STATUS_MASK			(0x3)
+#define   ECC_ERR_CNT_MASK			(0x1f)
+
+#define MA35_NFI_REG_NANDECCES1	(0x8D4)
+#define MA35_NFI_REG_NANDECCES2	(0x8D8)
+#define MA35_NFI_REG_NANDECCES3	(0x8DC)
+
+/* NAND-type Flash BCH Error Address Registers */
+#define MA35_NFI_REG_NANDECCEA0	(0x900)
+#define MA35_NFI_REG_NANDECCEA1	(0x904)
+#define MA35_NFI_REG_NANDECCEA2	(0x908)
+#define MA35_NFI_REG_NANDECCEA3	(0x90C)
+#define MA35_NFI_REG_NANDECCEA4	(0x910)
+#define MA35_NFI_REG_NANDECCEA5	(0x914)
+#define MA35_NFI_REG_NANDECCEA6	(0x918)
+#define MA35_NFI_REG_NANDECCEA7	(0x91C)
+#define MA35_NFI_REG_NANDECCEA8	(0x920)
+#define MA35_NFI_REG_NANDECCEA9	(0x924)
+#define MA35_NFI_REG_NANDECCEA10	(0x928)
+#define MA35_NFI_REG_NANDECCEA11	(0x92C)
+
+/* NAND-type Flash BCH Error Data Registers */
+#define MA35_NFI_REG_NANDECCED0	(0x960)
+#define MA35_NFI_REG_NANDECCED1	(0x964)
+#define MA35_NFI_REG_NANDECCED2	(0x968)
+#define MA35_NFI_REG_NANDECCED3	(0x96C)
+#define MA35_NFI_REG_NANDECCED4	(0x970)
+#define MA35_NFI_REG_NANDECCED5	(0x974)
+
+/* NAND-type Flash Redundant Area Registers */
+#define MA35_NFI_REG_NANDRA0		(0xA00)
+#define MA35_NFI_REG_NANDRA1		(0xA04)
+
+#define SKIP_SPARE_BYTES	4
+
+/* BCH algorithm related constants and variables */
+enum {
+	eBCH_NONE = 0,
+	eBCH_T8,
+	eBCH_T12,
+	eBCH_T24,
+	eBCH_CNT
+} E_BCHALGORITHM;
+
+static const int g_i32BCHAlgoIdx[eBCH_CNT] = {BCH_T8, BCH_T8, BCH_T12, BCH_T24};
+static struct nand_ecclayout_user ma35_nand_oob;
+static const int g_i32ParityNum[3][eBCH_CNT] = {
+	{0,  60,  92,  90},  /* for 2K */
+	{0, 120, 184, 180},  /* for 4K */
+	{0, 240, 368, 360},  /* for 8K */
+};
+
+
+struct ma35_nand_info {
+	struct nand_controller controller;
+	struct device *dev;
+	void __iomem *regs;
+	int irq;
+	struct clk *clk;
+	struct completion complete;
+
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	struct mtd_partition *parts;
+	int nr_parts;
+
+	int eBCHAlgo;
+	u8 *dma_buf;
+	spinlock_t dma_lock;
+	dma_addr_t dma_addr;
+};
+
+static int ma35_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section || !ecc->total)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int ma35_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 2;
+	oobregion->offset = 2;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops ma35_ooblayout_ops = {
+	.ecc = ma35_ooblayout_ecc,
+	.free = ma35_ooblayout_free,
+};
+
+/*
+ * Initialize hardware ECC
+ */
+static void ma35_nand_hwecc_init(struct ma35_nand_info *nand)
+{
+	struct mtd_info *mtd = nand_to_mtd(&nand->chip);
+
+	/* reset nand controller */
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | SWRST,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	/* Redundant area size */
+	writel(mtd->oobsize, nand->regs + MA35_NFI_REG_NANDRACTL);
+
+	/* Protect redundant 3 bytes */
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | PROT3BEN,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	/* Write the ECC parity codes automatically to NAND Flash */
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | ECC_CHK,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	if (nand->eBCHAlgo == eBCH_NONE) {
+		/* Disable H/W ECC, ECC parity check enable bit during read page */
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~ECC_EN),
+			nand->regs + MA35_NFI_REG_NANDCTL);
+	} else {
+		/* Set BCH algorithm */
+		writel((readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~BCH_MASK)) |
+			g_i32BCHAlgoIdx[nand->eBCHAlgo], nand->regs + MA35_NFI_REG_NANDCTL);
+
+		/* Enable H/W ECC, ECC parity check enable bit during read page */
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | ECC_EN,
+			nand->regs + MA35_NFI_REG_NANDCTL);
+	}
+	spin_lock_init(&nand->dma_lock);
+}
+
+static void ma35_nand_initialize(struct ma35_nand_info *nand)
+{
+	writel(NAND_EN, nand->regs + MA35_NFI_REG_GCTL);
+}
+
+
+/* Define some constants for BCH */
+/* define the total padding bytes for 512/1024 data segment */
+#define BCH_PADDING_LEN_512	32
+#define BCH_PADDING_LEN_1024	64
+/* define the BCH parity code length for 512 bytes data pattern */
+#define BCH_PARITY_LEN_T8	15
+#define BCH_PARITY_LEN_T12	23
+/* define the BCH parity code length for 1024 bytes data pattern */
+#define BCH_PARITY_LEN_T24	45
+
+/* Correct data by BCH alrogithm */
+static void ma35_nfi_correctdata(struct ma35_nand_info *nand, u8 ucFieidIndex,
+				 u8 ucErrorCnt, u8 *addr)
+{
+	u32 field_len, padding_len, parity_len;
+	u32 total_field_num, uPageSize;
+	u32 uaData[24], uaAddr[24];
+	u32 uaErrorData[6];
+	u8  *smra_index;
+	u8  i, j;
+
+	/* assign parameters for different BCH and page size */
+	switch (readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK) {
+	case BCH_T24:
+		field_len = 1024;
+		parity_len = BCH_PARITY_LEN_T24;
+		padding_len = BCH_PADDING_LEN_1024;
+		break;
+	case BCH_T12:
+		field_len = 512;
+		parity_len = BCH_PARITY_LEN_T12;
+		padding_len = BCH_PADDING_LEN_512;
+		break;
+	case BCH_T8:
+		field_len = 512;
+		parity_len = BCH_PARITY_LEN_T8;
+		padding_len = BCH_PADDING_LEN_512;
+		break;
+	default:
+		pr_warn("NAND ERROR: invalid SMCR_BCH_TSEL = 0x%08X\n",
+			(u32)(readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK));
+		return;
+	}
+
+	uPageSize = readl(nand->regs + MA35_NFI_REG_NANDCTL) & PSIZE_MASK;
+	switch (uPageSize) {
+	case PSIZE_8K:
+		total_field_num = 8192 / field_len; break;
+	case PSIZE_4K:
+		total_field_num = 4096 / field_len; break;
+	case PSIZE_2K:
+		total_field_num = 2048 / field_len; break;
+	default:
+		pr_warn("NAND ERROR: invalid SMCR_PSIZE = 0x%08X\n", uPageSize);
+		return;
+	}
+
+	/* got valid BCH_ECC_DATAx and parse them to uaData[]
+	 * got the valid register number of BCH_ECC_DATAx since
+	 * one register include 4 error bytes
+	 */
+	j = ucErrorCnt / 4;
+	j++;
+	if (j > 6)
+		j = 6;	/* there are 6 BCH_ECC_DATAx registers to support BCH T24 */
+
+	for (i = 0; i < j; i++)
+		uaErrorData[i] = readl(nand->regs + MA35_NFI_REG_NANDECCED0 + i*4);
+
+	for (i = 0; i < j; i++) {
+		uaData[i*4+0] = uaErrorData[i] & 0xff;
+		uaData[i*4+1] = (uaErrorData[i] >> 8) & 0xff;
+		uaData[i*4+2] = (uaErrorData[i] >> 16) & 0xff;
+		uaData[i*4+3] = (uaErrorData[i] >> 24) & 0xff;
+	}
+
+	/* got valid REG_BCH_ECC_ADDRx and parse them to uaAddr[]
+	 * got the valid register number of REG_BCH_ECC_ADDRx since
+	 * one register include 2 error addresses
+	 */
+	j = ucErrorCnt / 2;
+	j++;
+	if (j > 12)
+		j = 12; /* there are 12 REG_BCH_ECC_ADDRx registers to support BCH T24 */
+
+	for (i = 0; i < j; i++) {
+		/* 11 bits for error address */
+		uaAddr[i*2+0] = readl(nand->regs + MA35_NFI_REG_NANDECCEA0 + i*4) & 0x07ff;
+		uaAddr[i*2+1] = (readl(nand->regs + MA35_NFI_REG_NANDECCEA0 + i*4)>>16) & 0x07ff;
+	}
+
+	/* pointer to begin address of field that with data error */
+	addr += (ucFieidIndex-1) * field_len;
+
+	/* correct each error bytes */
+	for (i = 0; i < ucErrorCnt; i++) {
+		/* for wrong data in field */
+		if (uaAddr[i] < field_len)
+			*(addr+uaAddr[i]) ^= uaData[i];
+
+		/* for wrong first-3-bytes in redundancy area */
+		else if (uaAddr[i] < (field_len+3)) {
+			uaAddr[i] -= field_len;
+			uaAddr[i] += (parity_len * (ucFieidIndex-1));	/* field offset */
+
+			*((u8 *)nand->regs + MA35_NFI_REG_NANDRA0 + uaAddr[i]) ^= uaData[i];
+		}
+		/* for wrong parity code in redundancy area */
+		/* BCH_ERR_ADDRx = [data in field] + [3 bytes] + [xx] + [parity code]          */
+		/*                                   |<--     padding bytes      -->|          */
+		/* The BCH_ERR_ADDRx for last parity code always = field size + padding size.  */
+		/* So, the first parity code = field size + padding size - parity code length. */
+		/* For example, for BCH T12, the first parity code = 512 + 32 - 23 = 521.      */
+		/* That is, error byte address offset within field is                          */
+		else {
+			uaAddr[i] = uaAddr[i] - (field_len + padding_len - parity_len);
+
+			/* smra_index point to the first parity code of
+			 * first field in register SMRA0~n
+			 */
+			smra_index = (u8 *)(nand->regs + MA35_NFI_REG_NANDRA0 +
+				(readl(nand->regs+MA35_NFI_REG_NANDRACTL) & 0x1ff) -
+				(parity_len * total_field_num));
+
+			/* final address = first parity code of first field + */
+			/*                 offset of fields +                 */
+			/*                 offset within field                */
+
+			*((u8 *)smra_index + (parity_len * (ucFieidIndex - 1)) + uaAddr[i])
+				^= uaData[i];
+		}
+	} /* end of for (i < ucErrorCnt) */
+}
+
+static int ma35_nfi_correct(struct nand_chip *chip, unsigned long addr)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int uStatus, i, j, i32FieldNum = 0;
+	int uReportErrCnt = 0;
+	int uErrorCnt = 0;
+
+	if ((readl(nand->regs + MA35_NFI_REG_NANDCTL) & BCH_MASK) == BCH_T24)
+		i32FieldNum = mtd->writesize / 1024;
+	else
+		i32FieldNum = mtd->writesize / 512;
+
+	if (i32FieldNum < 4)
+		i32FieldNum = 1;
+	else
+		i32FieldNum /= 4;
+
+	for (j = 0; j < i32FieldNum; j++) {
+		uStatus = readl(nand->regs + MA35_NFI_REG_NANDECCES0 + j*4);
+		if (!uStatus)
+			continue;
+
+		for (i = 1; i < 5; i++) {
+			if (!(uStatus & ECC_STATUS_MASK)) {
+				/* No error */
+				uStatus >>= 8;
+				continue;
+
+			} else if ((uStatus & ECC_STATUS_MASK) == 0x01) {
+				/* Correctable error */
+				uErrorCnt = (uStatus >> 2) & ECC_ERR_CNT_MASK;
+				pr_warn("Field (%d, %d) have %d error!\n", j, i, uErrorCnt);
+				ma35_nfi_correctdata(nand, j*4+i, uErrorCnt, (u8 *)addr);
+				uReportErrCnt += uErrorCnt;
+
+			} else {
+				/* uncorrectable error */
+				pr_warn("uncorrectable error! 0x%4x\n", uStatus);
+				return -1;
+			}
+			uStatus >>= 8;
+		}
+	}
+	return uReportErrCnt;
+}
+
+
+static int ma35_nand_correct_data(struct nand_chip *chip, u_char *dat,
+				  u_char *read_ecc, u_char *calc_ecc)
+{
+	return 0;
+}
+
+
+static void ma35_nand_enable_hwecc(struct nand_chip *chip, int mode)
+{
+
+}
+
+/*
+ * Initial dma controller
+ */
+static void ma35_nand_dmac_init(struct ma35_nand_info *nand)
+{
+	/* DMAC reset and enable */
+	writel(DMA_RST | DMA_EN, nand->regs + MA35_NFI_REG_DMACTL);
+	writel(DMA_EN, nand->regs + MA35_NFI_REG_DMACTL);
+
+	/* Clear DMA finished flag */
+	writel(INT_DMA | INT_ECC, nand->regs + MA35_NFI_REG_NANDINTSTS);
+
+	init_completion(&nand->complete);
+}
+
+/*
+ * read a byte from NAND controller
+ */
+static u8 ma35_nand_read_byte(struct nand_chip *chip)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	u8 ret;
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs+MA35_NFI_REG_NANDCTL);
+	ret = (u8)readl(nand->regs + MA35_NFI_REG_NANDDATA);
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	return ret;
+}
+
+
+/*
+ * read data from NAND controller
+ */
+static void ma35_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	int i;
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs + MA35_NFI_REG_NANDCTL);
+	for (i = 0; i < len; i++)
+		buf[i] = (u8)readl(nand->regs + MA35_NFI_REG_NANDDATA);
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+}
+/*
+ * write data to NAND controller
+ */
+
+static void ma35_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	int i;
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs + MA35_NFI_REG_NANDCTL);
+	for (i = 0; i < len; i++)
+		writel(buf[i], nand->regs + MA35_NFI_REG_NANDDATA);
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+}
+
+/*
+ * configure and start dma transfer
+ */
+static inline int ma35_nand_dma_transfer(struct nand_chip *chip,
+					  const u_char *addr, u32 len, int is_write)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	unsigned long timeo = jiffies + HZ/2;
+	dma_addr_t dma_addr;
+	int ret;
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs+MA35_NFI_REG_NANDCTL);
+	/* For save, wait DMAC to ready */
+	while (1) {
+		if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
+			break;
+		if (time_after(jiffies, timeo))
+			return -ETIMEDOUT;
+	}
+
+	/* Reinitial dmac */
+	ma35_nand_dmac_init(nand);
+
+	writel(mtd->oobsize, nand->regs + MA35_NFI_REG_NANDRACTL);
+
+	/* setup and start DMA using dma_addr */
+	if (is_write) {
+		register char *ptr = nand->regs + MA35_NFI_REG_NANDRA0;
+
+		writel(INT_DMA, nand->regs + MA35_NFI_REG_NANDINTEN);
+		/* To mark this page as dirty. */
+		if (ptr[3] == 0xFF)
+			ptr[3] = 0;
+		if (ptr[2] == 0xFF)
+			ptr[2] = 0;
+
+		/* Fill dma_addr */
+		dma_addr = dma_map_single(nand->dev, (void *)addr, len, DMA_TO_DEVICE);
+		dma_sync_single_for_device(nand->dev, dma_addr, len, DMA_TO_DEVICE);
+		ret = dma_mapping_error(nand->dev, dma_addr);
+		if (ret) {
+			dev_err(nand->dev, "dma mapping error\n");
+			return -EINVAL;
+		}
+
+		writel((unsigned long)dma_addr, nand->regs + MA35_NFI_REG_DMASA);
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DMA_W_EN,
+			nand->regs + MA35_NFI_REG_NANDCTL);
+		wait_for_completion_timeout(&nand->complete, msecs_to_jiffies(1000));
+
+		dma_unmap_single(nand->dev, dma_addr, len, DMA_TO_DEVICE);
+	} else {
+		writel(INT_DMA | INT_ECC, nand->regs + MA35_NFI_REG_NANDINTEN);
+		/* Fill dma_addr */
+		dma_addr = dma_map_single(nand->dev, (void *)addr, len, DMA_FROM_DEVICE);
+		ret = dma_mapping_error(nand->dev, dma_addr);
+		if (ret) {
+			dev_err(nand->dev, "dma mapping error\n");
+			return -EINVAL;
+		}
+		nand->dma_buf = (u8 *) addr;
+		nand->dma_addr = dma_addr;
+
+		writel((unsigned long)dma_addr, nand->regs + MA35_NFI_REG_DMASA);
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DMA_R_EN,
+			nand->regs + MA35_NFI_REG_NANDCTL);
+		wait_for_completion_timeout(&nand->complete, msecs_to_jiffies(1000));
+
+		dma_sync_single_for_cpu(nand->dev, dma_addr, len, DMA_FROM_DEVICE);
+		dma_unmap_single(nand->dev, dma_addr, len, DMA_FROM_DEVICE);
+	}
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	return 0;
+}
+
+static void ma35_read_buf_dma(struct nand_chip *chip, u_char *buf, int len)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	if (len == mtd->writesize)
+		ma35_nand_dma_transfer(chip, buf, len, 0x0);
+	else
+		ma35_nand_read_buf(chip, buf, len);
+}
+
+static void ma35_write_buf_dma(struct nand_chip *chip, const u_char *buf, int len)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	if (len == mtd->writesize)
+		ma35_nand_dma_transfer(chip, (u_char *)buf, len, 0x1);
+	else
+		ma35_nand_write_buf(chip, buf, len);
+}
+
+static int ma35_nand_devready(struct nand_chip *chip)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	unsigned int val;
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs+MA35_NFI_REG_NANDCTL);
+	val = (readl(nand->regs + MA35_NFI_REG_NANDINTSTS) & INT_RB0_STS) ? 1 : 0;
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs+MA35_NFI_REG_NANDCTL);
+
+	return val;
+}
+
+static int ma35_waitfunc(struct nand_chip *chip)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	unsigned long timeo = jiffies;
+	int status = -1;
+
+	timeo += msecs_to_jiffies(400);
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs + MA35_NFI_REG_NANDCTL);
+	while (time_before(jiffies, timeo)) {
+		status = readl(nand->regs + MA35_NFI_REG_NANDINTSTS);
+		if (status & INT_RB0) {
+			writel(INT_RB0, nand->regs + MA35_NFI_REG_NANDINTSTS);
+			status = 0;
+			break;
+		}
+		cond_resched();
+	}
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+
+	return status;
+}
+
+static void ma35_nand_command(struct nand_chip *chip, u32 command, int column, int page_addr)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+		nand->regs + MA35_NFI_REG_NANDCTL);
+	writel(INT_RB0, nand->regs + MA35_NFI_REG_NANDINTSTS);
+
+	if (command == NAND_CMD_READOOB) {
+		command = NAND_CMD_READ0;
+		column += mtd->writesize;
+	}
+
+	switch (command) {
+	case NAND_CMD_RESET:
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		break;
+
+	case NAND_CMD_READID:
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		writel(ENDADDR|column, nand->regs + MA35_NFI_REG_NANDADDR);
+		break;
+
+	case NAND_CMD_PARAM:
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		writel(ENDADDR|column, nand->regs + MA35_NFI_REG_NANDADDR);
+		ma35_waitfunc(chip);
+		break;
+
+	case NAND_CMD_READ0:
+		writel(ENABLE_WP, nand->regs + MA35_NFI_REG_NANDECTL);
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		if (column != -1) {
+			writel(column & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+			writel((column >> 8) & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+		}
+		if (page_addr != -1) {
+			writel(page_addr & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+			if (chip->options & NAND_ROW_ADDR_3) {
+				writel((page_addr >> 8) & 0xff,
+					nand->regs + MA35_NFI_REG_NANDADDR);
+				writel(((page_addr >> 16) & 0xff) | ENDADDR,
+					nand->regs + MA35_NFI_REG_NANDADDR);
+			} else {
+				writel(((page_addr >> 8) & 0xff) | ENDADDR,
+					nand->regs + MA35_NFI_REG_NANDADDR);
+			}
+		}
+		writel(NAND_CMD_READSTART, nand->regs + MA35_NFI_REG_NANDCMD);
+		ma35_waitfunc(chip);
+		break;
+
+	case NAND_CMD_ERASE1:
+		writel(DISABLE_WP, nand->regs + MA35_NFI_REG_NANDECTL);
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		writel(page_addr & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+		if (chip->options & NAND_ROW_ADDR_3) {
+			writel((page_addr >> 8) & 0xff,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+			writel(((page_addr >> 16) & 0xff) | ENDADDR,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+		} else {
+			writel(((page_addr >> 8) & 0xff) | ENDADDR,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+		}
+		break;
+
+	case NAND_CMD_SEQIN:
+		writel(DISABLE_WP, nand->regs + MA35_NFI_REG_NANDECTL);
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		writel(column & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+		writel(column >> 8, nand->regs + MA35_NFI_REG_NANDADDR);
+		writel(page_addr & 0xff, nand->regs + MA35_NFI_REG_NANDADDR);
+		if (chip->options & NAND_ROW_ADDR_3) {
+			writel((page_addr >> 8) & 0xff,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+			writel(((page_addr >> 16) & 0xff) | ENDADDR,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+		} else {
+			writel(((page_addr >> 8) & 0xff) | ENDADDR,
+				nand->regs + MA35_NFI_REG_NANDADDR);
+		}
+		break;
+
+	case NAND_CMD_STATUS:
+		writel(DISABLE_WP, nand->regs + MA35_NFI_REG_NANDECTL);
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+		break;
+
+	default:
+		writel(command, nand->regs + MA35_NFI_REG_NANDCMD);
+	}
+	writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+		nand->regs + MA35_NFI_REG_NANDCTL);
+}
+
+/* select chip */
+static void ma35_nand_select_chip(struct nand_chip *chip, int cs)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+
+	if (cs == 0)
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~DISABLE_CS0),
+			nand->regs + MA35_NFI_REG_NANDCTL);
+	else
+		writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | DISABLE_CS0,
+			nand->regs + MA35_NFI_REG_NANDCTL);
+}
+
+static int ma35_nand_calculate_ecc(struct nand_chip *chip, const u_char *dat,
+				   u_char *ecc_code)
+{
+	return 0;
+}
+
+static int ma35_nand_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
+				      int oob_required, int page)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	register char *ptr = nand->regs + MA35_NFI_REG_NANDRA0;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	u8 *ecc_calc = chip->ecc.calc_buf;
+
+	memset((void *)ptr, 0xFF, mtd->oobsize);
+	memcpy((void *)ptr, (void *)chip->oob_poi, mtd->oobsize - chip->ecc.total);
+
+	ma35_nand_command(chip, NAND_CMD_SEQIN, 0, page);
+	ma35_nand_dma_transfer(chip, buf, mtd->writesize, 0x1);
+	ma35_nand_command(chip, NAND_CMD_PAGEPROG, -1, -1);
+	ma35_waitfunc(chip);
+
+	/* Copy parity code in NANDRA to calc */
+	memcpy((void *)ecc_calc,
+		(void *)(nand->regs + MA35_NFI_REG_NANDRA0 + (mtd->oobsize - chip->ecc.total)),
+		chip->ecc.total);
+
+	/* Copy parity code in calc to oob_poi */
+	memcpy((void *)(chip->oob_poi + (mtd->oobsize - chip->ecc.total)),
+		(void *)ecc_calc, chip->ecc.total);
+
+	return 0;
+}
+
+static int ma35_nand_read_page_hwecc_oob_first(struct nand_chip *chip, u8 *buf,
+						int oob_required, int page)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	char *ptr = nand->regs + MA35_NFI_REG_NANDRA0;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	/* 1. read the OOB area  */
+	ma35_nand_command(chip, NAND_CMD_READOOB, 0, page);
+	ma35_nand_read_buf(chip, chip->oob_poi, mtd->oobsize);
+
+	/* 2. copy OOB data to NANDRA for page read */
+	memcpy((void *)ptr, (void *)chip->oob_poi, mtd->oobsize);
+
+	if ((*(ptr+2) != 0) && (*(ptr+3) != 0))
+		memset((void *)buf, 0xff, mtd->writesize);
+	else {
+		/* 3. read data from nand */
+		ma35_nand_command(chip, NAND_CMD_READ0, 0, page);
+		ma35_nand_dma_transfer(chip, buf, mtd->writesize, 0x0);
+
+		/* 4. restore OOB data from SMRA */
+		memcpy((void *)chip->oob_poi, (void *)ptr, mtd->oobsize);
+	}
+
+	return 0;
+}
+
+static void ma35_layout_oob_table(struct nand_ecclayout_user *pNandOOBTbl,
+				  int oobsize, int eccbytes)
+{
+	pNandOOBTbl->eccbytes = eccbytes;
+	pNandOOBTbl->oobavail = oobsize - SKIP_SPARE_BYTES - eccbytes;
+	pNandOOBTbl->oobfree[0].offset = SKIP_SPARE_BYTES;
+	pNandOOBTbl->oobfree[0].length = oobsize - eccbytes - pNandOOBTbl->oobfree[0].offset;
+
+	pNandOOBTbl->oobfree[1].offset = 0;
+	pNandOOBTbl->oobfree[1].length = 0;
+}
+
+static int ma35_nand_read_oob_hwecc(struct nand_chip *chip, int page)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	char *ptr = nand->regs + MA35_NFI_REG_NANDRA0;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	ma35_nand_command(chip, NAND_CMD_READOOB, 0, page);
+	ma35_nand_read_buf(chip, chip->oob_poi, mtd->oobsize);
+
+	/* copy OOB data to NANDRA for page read */
+	memcpy((void *)ptr, (void *)chip->oob_poi, mtd->oobsize);
+
+	if ((*(ptr+2) != 0) && (*(ptr+3) != 0))
+		memset((void *)chip->oob_poi, 0xff, mtd->oobsize);
+
+	return 0;
+}
+
+static irqreturn_t ma35_nand_irq(int irq, struct ma35_nand_info *nand)
+{
+	struct mtd_info *mtd = nand_to_mtd(&nand->chip);
+	int stat = 0;
+	u32 isr;
+
+	spin_lock(&nand->dma_lock);
+
+	isr = readl(nand->regs + MA35_NFI_REG_NANDINTSTS);
+	if (isr & INT_ECC) {
+		dma_sync_single_for_cpu(nand->dev, nand->dma_addr, mtd->writesize,
+					DMA_FROM_DEVICE);
+		stat = ma35_nfi_correct(&nand->chip, (unsigned long)nand->dma_buf);
+		if (stat < 0) {
+			mtd->ecc_stats.failed++;
+			writel(DMA_RST | DMA_EN, nand->regs + MA35_NFI_REG_DMACTL);
+			writel(readl(nand->regs + MA35_NFI_REG_NANDCTL) | SWRST,
+				nand->regs + MA35_NFI_REG_NANDCTL);
+		} else if (stat > 0) {
+			mtd->ecc_stats.corrected += stat;   /* Add corrected bit count */
+		}
+		writel(INT_ECC, nand->regs + MA35_NFI_REG_NANDINTSTS);
+	}
+	if (isr & INT_DMA) {
+		writel(INT_DMA, nand->regs + MA35_NFI_REG_NANDINTSTS);
+		complete(&nand->complete);
+	}
+	spin_unlock(&nand->dma_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int ma35_nand_attach_chip(struct nand_chip *chip)
+{
+	struct ma35_nand_info *nand = nand_get_controller_data(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	unsigned int reg;
+
+	/* Set PSize */
+	reg = readl(nand->regs + MA35_NFI_REG_NANDCTL) & (~PSIZE_MASK);
+	if (mtd->writesize == 2048)
+		writel(reg | PSIZE_2K, nand->regs + MA35_NFI_REG_NANDCTL);
+	else if (mtd->writesize == 4096)
+		writel(reg | PSIZE_4K, nand->regs + MA35_NFI_REG_NANDCTL);
+	else if (mtd->writesize == 8192)
+		writel(reg | PSIZE_8K, nand->regs + MA35_NFI_REG_NANDCTL);
+
+	if (chip->ecc.strength == 0) {
+		nand->eBCHAlgo = eBCH_NONE; /* No ECC */
+		ma35_layout_oob_table(&ma35_nand_oob, mtd->oobsize,
+					g_i32ParityNum[mtd->writesize>>12][nand->eBCHAlgo]);
+
+	} else if (chip->ecc.strength <= 8) {
+		nand->eBCHAlgo = eBCH_T8; /* T8 */
+		ma35_layout_oob_table(&ma35_nand_oob, mtd->oobsize,
+					g_i32ParityNum[mtd->writesize>>12][nand->eBCHAlgo]);
+
+	} else if (chip->ecc.strength <= 12) {
+		nand->eBCHAlgo = eBCH_T12; /* T12 */
+		ma35_layout_oob_table(&ma35_nand_oob, mtd->oobsize,
+					g_i32ParityNum[mtd->writesize>>12][nand->eBCHAlgo]);
+
+	} else if (chip->ecc.strength <= 24) {
+		nand->eBCHAlgo = eBCH_T24; /* T24 */
+		ma35_layout_oob_table(&ma35_nand_oob, mtd->oobsize,
+					g_i32ParityNum[mtd->writesize>>12][nand->eBCHAlgo]);
+
+	} else {
+		pr_warn("NAND Controller is not support this flash. (%d, %d)\n",
+			mtd->writesize, mtd->oobsize);
+	}
+
+	chip->ecc.steps = mtd->writesize / chip->ecc.size;
+	chip->ecc.bytes = ma35_nand_oob.eccbytes / chip->ecc.steps;
+	chip->ecc.total = ma35_nand_oob.eccbytes;
+	mtd_set_ooblayout(mtd, &ma35_ooblayout_ops);
+
+	pr_info("attach: page %d, oob size %d, %d\n", mtd->writesize, mtd->oobsize,
+		ma35_nand_oob.eccbytes);
+
+	/* add mtd-id. The string should same as uboot definition */
+	mtd->name = "nand0";
+
+	ma35_nand_hwecc_init(nand);
+
+	writel(ENABLE_WP, nand->regs + MA35_NFI_REG_NANDECTL);
+
+	return 0;
+}
+
+static const struct nand_controller_ops ma35_nand_controller_ops = {
+	.attach_chip = ma35_nand_attach_chip,
+};
+
+static int ma35_nand_probe(struct platform_device *pdev)
+{
+	struct ma35_nand_info *nand;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	int retval = 0;
+
+	nand = devm_kzalloc(&pdev->dev, sizeof(struct ma35_nand_info), GFP_KERNEL);
+	if (!nand)
+		return -ENOMEM;
+
+	nand_controller_init(&nand->controller);
+
+	nand->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(nand->regs))
+		return PTR_ERR(nand->regs);
+
+	nand->dev = &pdev->dev;
+	chip = &nand->chip;
+	mtd = nand_to_mtd(chip);
+	nand_set_controller_data(chip, nand);
+	nand_set_flash_node(chip, pdev->dev.of_node);
+
+	mtd->priv = chip;
+	mtd->owner = THIS_MODULE;
+	mtd->dev.parent = &pdev->dev;
+
+	nand->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(nand->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(nand->clk),
+				     "failed to find nand clock\n");
+
+	retval = clk_prepare_enable(nand->clk);
+	if (retval < 0) {
+		dev_err(&pdev->dev, "Failed to enable clock\n");
+		return -ENXIO;
+	}
+
+	nand->chip.controller    = &nand->controller;
+
+	chip->legacy.cmdfunc     = ma35_nand_command;
+	chip->legacy.waitfunc    = ma35_waitfunc;
+	chip->legacy.read_byte   = ma35_nand_read_byte;
+	chip->legacy.select_chip = ma35_nand_select_chip;
+	chip->legacy.read_buf    = ma35_read_buf_dma;
+	chip->legacy.write_buf   = ma35_write_buf_dma;
+	chip->legacy.dev_ready   = ma35_nand_devready;
+	chip->legacy.chip_delay  = 25; /* us */
+
+	/* Read OOB data first, then HW read page */
+	chip->ecc.hwctl      = ma35_nand_enable_hwecc;
+	chip->ecc.calculate  = ma35_nand_calculate_ecc;
+	chip->ecc.correct    = ma35_nand_correct_data;
+	chip->ecc.write_page = ma35_nand_write_page_hwecc;
+	chip->ecc.read_page  = ma35_nand_read_page_hwecc_oob_first;
+	chip->ecc.read_oob   = ma35_nand_read_oob_hwecc;
+	chip->options |= (NAND_NO_SUBPAGE_WRITE | NAND_USES_DMA);
+
+	ma35_nand_initialize(nand);
+	platform_set_drvdata(pdev, nand);
+
+	nand->controller.ops = &ma35_nand_controller_ops;
+
+	nand->irq = platform_get_irq(pdev, 0);
+	if (nand->irq < 0) {
+		dev_err(&pdev->dev, "failed to get platform irq\n");
+		return -EINVAL;
+	}
+
+	if (request_irq(nand->irq, (irq_handler_t)&ma35_nand_irq,
+			IRQF_TRIGGER_HIGH, "ma35d1-nand", nand)) {
+		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
+		return -ENXIO;
+	}
+
+	retval = nand_scan(chip, 1);
+	if (retval)
+		return retval;
+
+	if (mtd_device_register(mtd, nand->parts, nand->nr_parts)) {
+		nand_cleanup(chip);
+		devm_kfree(&pdev->dev, nand);
+		return retval;
+	}
+
+	pr_info("ma35-nfi: registered successfully! mtdid=%s\n", mtd->name);
+
+	return retval;
+}
+
+static void ma35_nand_remove(struct platform_device *pdev)
+{
+	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
+	struct nand_chip *chip = &nand->chip;
+	int ret;
+
+	ret = mtd_device_unregister(nand_to_mtd(chip));
+	WARN_ON(ret);
+	nand_cleanup(chip);
+
+	clk_disable_unprepare(nand->clk);
+
+	kfree(nand);
+	platform_set_drvdata(pdev, NULL);
+}
+
+/* PM Support */
+#ifdef CONFIG_PM
+static int ma35_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
+	unsigned long timeo = jiffies + HZ/2;
+
+	/* wait DMAC to ready */
+	while (1) {
+		if ((readl(nand->regs + MA35_NFI_REG_DMACTL) & DMA_BUSY) == 0)
+			break;
+		if (time_after(jiffies, timeo))
+			return -ETIMEDOUT;
+	}
+
+	clk_disable(nand->clk);
+
+	return 0;
+}
+
+static int ma35_nand_resume(struct platform_device *pdev)
+{
+	struct ma35_nand_info *nand = platform_get_drvdata(pdev);
+
+	clk_enable(nand->clk);
+	ma35_nand_hwecc_init(nand);
+	ma35_nand_dmac_init(nand);
+
+	return 0;
+}
+
+#else
+#define ma35_nand_suspend NULL
+#define ma35_nand_resume NULL
+#endif
+
+static const struct of_device_id ma35_nfi_of_match[] = {
+	{ .compatible = "nuvoton,ma35d1-nand" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ma35_nfi_of_match);
+
+static struct platform_driver ma35_nand_driver = {
+		.driver = {
+		.name   = "ma35d1-nand",
+		.owner  = THIS_MODULE,
+		.of_match_table = of_match_ptr(ma35_nfi_of_match),
+		},
+		.probe = ma35_nand_probe,
+		.remove_new = ma35_nand_remove,
+		.suspend = ma35_nand_suspend,
+		.resume = ma35_nand_resume,
+};
+
+static int __init ma35_nand_init(void)
+{
+	int ret;
+
+	pr_info("ma35 mtd nand driver\n");
+
+	ret = platform_driver_register(&ma35_nand_driver);
+	if (ret) {
+		pr_warn("nand: failed to add device driver %s\n",
+			ma35_nand_driver.driver.name);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void __exit ma35_nand_exit(void)
+{
+	platform_driver_unregister(&ma35_nand_driver);
+	pr_info("nand: unregistered successfully!\n");
+}
+
+module_init(ma35_nand_init);
+module_exit(ma35_nand_exit);
+
+MODULE_DESCRIPTION("Nuvoton ma35 NAND driver");
+MODULE_AUTHOR("Hui-Ping Chen <hpchen0nvt@gmail.com>");
+MODULE_LICENSE("GPL");