mbox series

[v5,0/2] Add HiSilicon INNO USB2 PHY driver support

Message ID 1520606821-22582-1-git-send-email-shawn.guo@linaro.org
Headers show
Series Add HiSilicon INNO USB2 PHY driver support | expand

Message

Shawn Guo March 9, 2018, 2:46 p.m. UTC 
It adds device tree bindings and driver support for HiSilicon INNO USB2
PHY device, which can be found on HiSilicon STB SoC Hi3798CV200.

Changes for v5:
 - Drop "syscon" from perictrl compatible in bindings example, as it's
   not really required by inno-usb2-phy devices.
 - Collect Rob's Reviewed-by tag on bindings.

Changes for v4:
 - Change device tree bindings to define each PHY port as a child node,
   and therefore instead of adding a custom .of_xlate, we can use
   of_phy_simple_xlate.  Also #phy-cells is 0 now, and consumers can
   refer to the phy without any number cell in phandle.

Changes for v3:
 - Make combphy device be child of peripheral controller and use 'reg'
   property for mapping combphy configuration register.

Changes for v2:
 - Move DT bindings into a separate patch.
 - Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning
   name with .init hook.

Pengcheng Li (2):
  dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY
  phy: add inno-usb2-phy driver for hi3798cv200 SoC

 .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt |  71 ++++++++
 drivers/phy/hisilicon/Kconfig                      |  10 ++
 drivers/phy/hisilicon/Makefile                     |   1 +
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c         | 197 +++++++++++++++++++++
 4 files changed, 279 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
 create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html