[v5,0/4] ASoC: codecs: Add WSA881x Smart Speaker amplifier support

Message ID 20190829144442.6210-1-srinivas.kandagatla@linaro.org
Headers show
  • ASoC: codecs: Add WSA881x Smart Speaker amplifier support
Related show


Srinivas Kandagatla Aug. 29, 2019, 2:44 p.m.
Thanks for reviewing v4 patchset, here is v5 with addressing the comments in v4

This patchset adds support to WSA8810/WSA8815 Class-D Smart Speaker
Amplifier which is SoundWire interfaced.
This also adds support to some missing bits in SoundWire bus layer like
Device Tree support.

This patchset along with DB845c machine driver and WCD934x codec driver
has been tested on SDM845 SoC based DragonBoard DB845c with two
WSA8810 speakers.

Most of the code in this driver is rework of Qualcomm downstream drivers
used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team.

        Add thermal sensor support in WSA881x.


Changes since v4:
 - updated slave bindings according to Rob's and Pierre Suggestion.
 - fixup warnings from make dt_binding_check

Srinivas Kandagatla (4):
  dt-bindings: soundwire: add slave bindings
  soundwire: core: add device tree support for slave devices
  dt-bindings: ASoC: Add WSA881x bindings
  ASoC: codecs: add wsa881x amplifier support

 .../bindings/sound/qcom,wsa881x.yaml          |   41 +
 .../soundwire/soundwire-controller.yaml       |   72 ++
 drivers/soundwire/bus.c                       |    2 +
 drivers/soundwire/bus.h                       |    1 +
 drivers/soundwire/slave.c                     |   52 +
 sound/soc/codecs/Kconfig                      |   10 +
 sound/soc/codecs/Makefile                     |    2 +
 sound/soc/codecs/wsa881x.c                    | 1134 +++++++++++++++++
 8 files changed, 1314 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
 create mode 100644 Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
 create mode 100644 sound/soc/codecs/wsa881x.c