mbox series

[v2,0/6] sc16is7xx: IrDA mode and threaded IRQs

Message ID 20200519182147.218713-1-daniel@zonque.org
Headers show
Series sc16is7xx: IrDA mode and threaded IRQs | expand

Message

Daniel Mack May 19, 2020, 6:21 p.m. UTC 
This is v2 of the series.

v2:

 * Change single bool properties into an array
   (suggested by Rob Herring)
 * Add a patch first try TRIGGER_LOW and SHARED interrupts, and then
   fall back to FALLING edge if the IRQ controller fails to provide the
   former (suggested by Maarten Brock)
 * Add a patch to check for the device presence

Daniel Mack (4):
  sc16is7xx: Always use falling edge IRQ
  sc16is7xx: Use threaded IRQ
  sc16is7xx: Allow sharing the IRQ line
  sc16is7xx: Read the LSR register for basic device presence check

Pascal Huerst (2):
  dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  sc16is7xx: Add flag to activate IrDA mode

 .../bindings/serial/nxp,sc16is7xx.txt         |  4 +
 drivers/tty/serial/sc16is7xx.c                | 73 +++++++++++++------
 2 files changed, 56 insertions(+), 21 deletions(-)