diff mbox series

[1/2] arm64: dts: uniphier: add support for LD11 Global board

Message ID 1495678755-13218-2-git-send-email-hayashi.kunihiko@socionext.com
State New
Headers show
Series add support for LD20/11 Global boards | expand

Commit Message

Kunihiko Hayashi May 25, 2017, 2:19 a.m. UTC
Add initial device tree support for LD11 Global board.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

---
 arch/arm64/boot/dts/socionext/Makefile             |   1 +
 .../boot/dts/socionext/uniphier-ld11-global.dts    | 105 +++++++++++++++++++++
 2 files changed, 106 insertions(+)
 create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts

-- 
2.7.4

Comments

Masahiro Yamada June 6, 2017, 10:31 a.m. UTC | #1
2017-05-25 11:19 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@socionext.com>:
> Add initial device tree support for LD11 Global board.

>

> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

> ---

>  arch/arm64/boot/dts/socionext/Makefile             |   1 +

>  .../boot/dts/socionext/uniphier-ld11-global.dts    | 105 +++++++++++++++++++++

>  2 files changed, 106 insertions(+)

>  create mode 100644 arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts

>

> diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile

> index 5538598b302c..8d07ee33e66f 100644

> --- a/arch/arm64/boot/dts/socionext/Makefile

> +++ b/arch/arm64/boot/dts/socionext/Makefile

> @@ -1,4 +1,5 @@

>  dtb-$(CONFIG_ARCH_UNIPHIER) += \

> +       uniphier-ld11-global.dtb \

>         uniphier-ld11-ref.dtb \

>         uniphier-ld20-ref.dtb

>

> diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts

> new file mode 100644

> index 000000000000..754195aa5a1a

> --- /dev/null

> +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts

> @@ -0,0 +1,105 @@

> +/*

> + * Device Tree Source for UniPhier LD11 Global Board

> + *

> + * Copyright (C) 2016-2017 Socionext Inc.

> + *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>

> + *           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

> + *

> + * This file is dual-licensed: you can use it either under the terms

> + * of the GPL or the X11 license, at your option. Note that this dual

> + * licensing only applies to this file, and not this project as a

> + * whole.

> + *

> + *  a) This file is free software; you can redistribute it and/or

> + *     modify it under the terms of the GNU General Public License as

> + *     published by the Free Software Foundation; either version 2 of the

> + *     License, or (at your option) any later version.

> + *

> + *     This file is distributed in the hope that it will be useful,

> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of

> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

> + *     GNU General Public License for more details.

> + *

> + * Or, alternatively,

> + *

> + *  b) Permission is hereby granted, free of charge, to any person

> + *     obtaining a copy of this software and associated documentation

> + *     files (the "Software"), to deal in the Software without

> + *     restriction, including without limitation the rights to use,

> + *     copy, modify, merge, publish, distribute, sublicense, and/or

> + *     sell copies of the Software, and to permit persons to whom the

> + *     Software is furnished to do so, subject to the following

> + *     conditions:

> + *

> + *     The above copyright notice and this permission notice shall be

> + *     included in all copies or substantial portions of the Software.

> + *

> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

> + *     OTHER DEALINGS IN THE SOFTWARE.

> + */


Can I ask v2?

Please use SPDX License Identifier.

If you see in ML, you will notice Rob is asking
to use SPDX for new DT files.


I switched existing DT files over to it.

https://patchwork.kernel.org/patch/9765437/
https://patchwork.kernel.org/patch/9765435/


-- 
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 5538598b302c..8d07ee33e66f 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -1,4 +1,5 @@ 
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-global.dtb \
 	uniphier-ld11-ref.dtb \
 	uniphier-ld20-ref.dtb
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
new file mode 100644
index 000000000000..754195aa5a1a
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -0,0 +1,105 @@ 
+/*
+ * Device Tree Source for UniPhier LD11 Global Board
+ *
+ * Copyright (C) 2016-2017 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+
+/ {
+	model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+	compatible = "socionext,uniphier-ld11-global", "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};