[6/7,media] em28xx: add MEDIA_TUNER dependency

Message ID 1453817424-3080054-6-git-send-email-arnd@arndb.de
State New
Headers show
Series
  • [1/7,media] pwc: hide unused label
Related show

Commit Message

Arnd Bergmann Jan. 26, 2016, 2:10 p.m.
em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER,
so we get a Kconfig warning if that is disabled:

warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER)

This adds a dependency on MEDIA_TUNER to avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 drivers/media/usb/em28xx/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-- 
2.7.0

Comments

Mauro Carvalho Chehab Jan. 26, 2016, 2:33 p.m. | #1
Em Tue, 26 Jan 2016 15:10:00 +0100
Arnd Bergmann <arnd@arndb.de> escreveu:

> em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER,

> so we get a Kconfig warning if that is disabled:

> 

> warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER)


This warning is bogus, as it is OK to select VIDEO_TUNER even if MEDIA_TUNER
is not defined.

See how MEDIA_TUNER is defined:


config MEDIA_TUNER
	tristate
	depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT) && I2C
	default y
	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
	select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT
	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT

MEDIA_TUNER is just one of the media Kconfig workarounds to its limitation of
not allowing to select a device that has dependencies. It is true if the user
selected either TV or radio media devices. It works together with 
MEDIA_SUBDRV_AUTOSELECT. When both are enabled, it selects all
media tuners. That makes easier for end users to not need to worry about
manually selecting the needed tuners.

Advanced users may, instead, manually select the media tuner that his
hardware needs. In such case, it doesn't matter if MEDIA_TUNER
is enabled or not.

As this is due to a Kconfig limitation, I've no idea how to fix or get
hid of it, but making em28xx dependent of MEDIA_TUNER is wrong.

Also, as this is a Kconfig hidden option, making em28xx dependent of
MEDIA_TUNER would actually disable it, if no other media driver is
compiled.

The problem here is that the em28xx driver is used by several different
types of devices:

- pure webcam devices. Those devices don't have a tuner;
- stream capture devices. Those devices don't have a tuner;
- analog TV devices. For analog TV to work, MEDIA_TUNER is needed. Still,
  most of those devices have Composite and S-VIDEO ports. It is possible
  to use the driver for stream capture on those ports even if MEDIA_TUNER
  is not compiled;
- digital TV devices. Those require either a tuner or a DVB frontend.
- any combination of the above.

Regards,
Mauro

> 

> This adds a dependency on MEDIA_TUNER to avoid the warning.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  drivers/media/usb/em28xx/Kconfig | 2 +-

>  1 file changed, 1 insertion(+), 1 deletion(-)

> 

> diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig

> index 75323f5efd0f..cacc757e2254 100644

> --- a/drivers/media/usb/em28xx/Kconfig

> +++ b/drivers/media/usb/em28xx/Kconfig

> @@ -1,6 +1,6 @@

>  config VIDEO_EM28XX

>  	tristate "Empia EM28xx USB devices support"

> -	depends on VIDEO_DEV && I2C

> +	depends on VIDEO_DEV && I2C && MEDIA_TUNER

>  	select VIDEO_TUNER

>  	select VIDEO_TVEEPROM

>
Mauro Carvalho Chehab Jan. 26, 2016, 4:36 p.m. | #2
Em Tue, 26 Jan 2016 16:53:38 +0100
Arnd Bergmann <arnd@arndb.de> escreveu:

> On Tuesday 26 January 2016 12:33:08 Mauro Carvalho Chehab wrote:

> > Em Tue, 26 Jan 2016 15:10:00 +0100

> > Arnd Bergmann <arnd@arndb.de> escreveu:

> >   

> > > em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER,

> > > so we get a Kconfig warning if that is disabled:

> > > 

> > > warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER)  

> > 

> > This warning is bogus, as it is OK to select VIDEO_TUNER even if MEDIA_TUNER

> > is not defined.

> > 

> > See how MEDIA_TUNER is defined:

> > 

> > 

> > config MEDIA_TUNER

> > 	tristate

> > 	depends on (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT) && I2C

> > 	default y

> > 	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_MT20XX if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_TEA5761 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT

> > 	select MEDIA_TUNER_TEA5767 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_RADIO_SUPPORT

> > 	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_TDA9887 if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_TUNER_MC44S803 if MEDIA_SUBDRV_AUTOSELECT

> > 

> > MEDIA_TUNER is just one of the media Kconfig workarounds to its limitation of

> > not allowing to select a device that has dependencies. It is true if the user

> > selected either TV or radio media devices. It works together with 

> > MEDIA_SUBDRV_AUTOSELECT. When both are enabled, it selects all

> > media tuners. That makes easier for end users to not need to worry about

> > manually selecting the needed tuners.

> > 

> > Advanced users may, instead, manually select the media tuner that his

> > hardware needs. In such case, it doesn't matter if MEDIA_TUNER

> > is enabled or not.

> > 

> > As this is due to a Kconfig limitation, I've no idea how to fix or get

> > hid of it, but making em28xx dependent of MEDIA_TUNER is wrong.  

> 

> I don't understand what limitation you see here. 


Before MEDIA_TUNER, what we had was something like:

	config MEDIA_driver_foo
	select VIDEO_tuner_bar if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_frontend_foobar if MEDIA_SUBDRV_AUTOSELECT
	...

However, as different I2C drivers had different dependencies, this
used to cause lots of troubles. So, one of the Kbuild maintainers
came out with the idea of converting from select into depends on.
The MEDIA_TUNER is just an ancillary invisible option to make it
work at the tuner's side, as usually what we want is to have all
tuners selected, as we don't have a one to one mapping about what
driver supports what tuner (nor we wanted to do it, as this would
mean lots of work for not much gain).

> The definition

> of the VIDEO_TUNER symbol is an empty 'tristate' symbol with a

> dependency on MEDIA_TUNER to ensure we get a warning if MEDIA_TUNER

> is not enabled, and to ensure it is set to 'm' if MEDIA_TUNER=m and

> a "bool" driver selects VIDEO_TUNER.


No, VIDEO_TUNER is there because we wanted to be able to use select
to enable V4L2 tuner core support and let people to manually select
the needed I2C devices with MEDIA_SUBDRV_AUTOSELECT unselected.

> 

> You are saying that the first one is not correct, so I assume we

> still need the second meaning. We could probably do that like the

> patch below (untested) that makes the intention much more explicit.

> 

> 	Arnd

> 

> diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig

> index 9beece00869b..1050bdf1848f 100644

> --- a/drivers/media/v4l2-core/Kconfig

> +++ b/drivers/media/v4l2-core/Kconfig

> @@ -37,7 +37,11 @@ config VIDEO_PCI_SKELETON

>  # Used by drivers that need tuner.ko

>  config VIDEO_TUNER

>  	tristate

> -	depends on MEDIA_TUNER

> +

> +config VIDEO_TUNER_MODULE

> +	tristate # must not be built-in if MEDIA_TUNER=m because of I2C

> +	default y if VIDEO_TUNER=y || MEDIA_TUNER=y

> +	default m if VIDEO_TUNER=m


Doesn't need to worry about that, because all drivers that select VIDEO_TUNER
depend on I2C:

drivers/media/pci/bt8xx/Kconfig:        select VIDEO_TUNER
drivers/media/pci/cx18/Kconfig: select VIDEO_TUNER
drivers/media/pci/cx23885/Kconfig:      select VIDEO_TUNER
drivers/media/pci/cx88/Kconfig: select VIDEO_TUNER
drivers/media/pci/ivtv/Kconfig: select VIDEO_TUNER
drivers/media/pci/saa7134/Kconfig:      select VIDEO_TUNER
drivers/media/pci/saa7146/Kconfig:      select VIDEO_TUNER
drivers/media/pci/saa7164/Kconfig:      select VIDEO_TUNER
drivers/media/usb/au0828/Kconfig:       select VIDEO_TUNER
drivers/media/usb/cx231xx/Kconfig:      select VIDEO_TUNER
drivers/media/usb/em28xx/Kconfig:       select VIDEO_TUNER
drivers/media/usb/go7007/Kconfig:       select VIDEO_TUNER
drivers/media/usb/pvrusb2/Kconfig:      select VIDEO_TUNER
drivers/media/usb/tm6000/Kconfig:       select VIDEO_TUNER
drivers/media/usb/usbvision/Kconfig:    select VIDEO_TUNER

This will always be the case for PCI/USB drivers that support analog TV,
as those drivers need to implement the I2C adapter code inside them.

>  

>  # Used by drivers that need v4l2-mem2mem.ko

>  config V4L2_MEM2MEM_DEV

> diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile

> index 1dc8bba2b198..971af6398d6d 100644

> --- a/drivers/media/v4l2-core/Makefile

> +++ b/drivers/media/v4l2-core/Makefile

> @@ -21,7 +21,7 @@ obj-$(CONFIG_VIDEO_V4L2) += videodev.o

>  obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o

>  obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o

>  

> -obj-$(CONFIG_VIDEO_TUNER) += tuner.o

> +obj-$(CONFIG_VIDEO_TUNER_MODULE) += tuner.o

>  

>  obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o


Yes, the above could work. This is simpler fix, and should work fine for
all current usecases:



Ok, if we'll have platform drivers for analog TV using the I2C bus
at directly in SoC, then your solution is better, but the tuner core
driver may not be the best way of doing it. So, for now, I would use
the simpler version.

Regards,
Maurodiff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index 9beece00869b..b30e1c879a57 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -37,7 +37,7 @@ config VIDEO_PCI_SKELETON
 # Used by drivers that need tuner.ko
 config VIDEO_TUNER
 	tristate
-	depends on MEDIA_TUNER
+	default MEDIA_TUNER
 
 # Used by drivers that need v4l2-mem2mem.ko
 config V4L2_MEM2MEM_DEV

Arnd Bergmann Jan. 26, 2016, 4:51 p.m. | #3
On Tuesday 26 January 2016 14:36:44 Mauro Carvalho Chehab wrote:
> Em Tue, 26 Jan 2016 16:53:38 +0100

> Arnd Bergmann <arnd@arndb.de> escreveu:

> > On Tuesday 26 January 2016 12:33:08 Mauro Carvalho Chehab wrote:

> > > Em Tue, 26 Jan 2016 15:10:00 +0100

> > > Advanced users may, instead, manually select the media tuner that his

> > > hardware needs. In such case, it doesn't matter if MEDIA_TUNER

> > > is enabled or not.

> > > 

> > > As this is due to a Kconfig limitation, I've no idea how to fix or get

> > > hid of it, but making em28xx dependent of MEDIA_TUNER is wrong.  

> > 

> > I don't understand what limitation you see here. 

> 

> Before MEDIA_TUNER, what we had was something like:

> 

> 	config MEDIA_driver_foo

> 	select VIDEO_tuner_bar if MEDIA_SUBDRV_AUTOSELECT

> 	select MEDIA_frontend_foobar if MEDIA_SUBDRV_AUTOSELECT

> 	...

> 

> However, as different I2C drivers had different dependencies, this

> used to cause lots of troubles. So, one of the Kbuild maintainers

> came out with the idea of converting from select into depends on.

> The MEDIA_TUNER is just an ancillary invisible option to make it

> work at the tuner's side, as usually what we want is to have all

> tuners selected, as we don't have a one to one mapping about what

> driver supports what tuner (nor we wanted to do it, as this would

> mean lots of work for not much gain).


Ok

> > The definition

> > of the VIDEO_TUNER symbol is an empty 'tristate' symbol with a

> > dependency on MEDIA_TUNER to ensure we get a warning if MEDIA_TUNER

> > is not enabled, and to ensure it is set to 'm' if MEDIA_TUNER=m and

> > a "bool" driver selects VIDEO_TUNER.

> 

> No, VIDEO_TUNER is there because we wanted to be able to use select

> to enable V4L2 tuner core support and let people to manually select

> the needed I2C devices with MEDIA_SUBDRV_AUTOSELECT unselected.


I meant what the dependency is there for, not the symbol itself.
It's clear what the symbol does.

> > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig

> > index 9beece00869b..1050bdf1848f 100644

> > --- a/drivers/media/v4l2-core/Kconfig

> > +++ b/drivers/media/v4l2-core/Kconfig

> > @@ -37,7 +37,11 @@ config VIDEO_PCI_SKELETON

> >  # Used by drivers that need tuner.ko

> >  config VIDEO_TUNER

> >  	tristate

> > -	depends on MEDIA_TUNER

> > +

> > +config VIDEO_TUNER_MODULE

> > +	tristate # must not be built-in if MEDIA_TUNER=m because of I2C

> > +	default y if VIDEO_TUNER=y || MEDIA_TUNER=y

> > +	default m if VIDEO_TUNER=m

> 

> Doesn't need to worry about that, because all drivers that select VIDEO_TUNER

> depend on I2C:

> 


Ok, then the dependency does not do anything other than generate a
warning.

> diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig

> index 9beece00869b..b30e1c879a57 100644

> --- a/drivers/media/v4l2-core/Kconfig

> +++ b/drivers/media/v4l2-core/Kconfig

> @@ -37,7 +37,7 @@ config VIDEO_PCI_SKELETON

>  # Used by drivers that need tuner.ko

>  config VIDEO_TUNER

>  	tristate

> -	depends on MEDIA_TUNER

> +	default MEDIA_TUNER

>  

>  # Used by drivers that need v4l2-mem2mem.ko

>  config V4L2_MEM2MEM_DEV


So this means it's now enabled if MEDIA_TUNER is enabled, whereas
before it was only enabled when explicitly selected. That sounds
like a useful change, but it also seems unrelated to the warning
fix, and should probably be a separate change, while for now
we can simply remove the 'depends on' line without any replacement.

> Ok, if we'll have platform drivers for analog TV using the I2C bus

> at directly in SoC, then your solution is better, but the tuner core

> driver may not be the best way of doing it. So, for now, I would use

> the simpler version.


Ok. Do you want me to submit a new version or do you prefer to write
one yourself? With or without the 'default'?

	Arnd
Mauro Carvalho Chehab Jan. 26, 2016, 5:08 p.m. | #4
Em Tue, 26 Jan 2016 17:51:11 +0100
Arnd Bergmann <arnd@arndb.de> escreveu:

> On Tuesday 26 January 2016 14:36:44 Mauro Carvalho Chehab wrote:

> > Em Tue, 26 Jan 2016 16:53:38 +0100

> > Arnd Bergmann <arnd@arndb.de> escreveu:  

> > > On Tuesday 26 January 2016 12:33:08 Mauro Carvalho Chehab wrote:  

> > > > Em Tue, 26 Jan 2016 15:10:00 +0100

> > > > Advanced users may, instead, manually select the media tuner that his

> > > > hardware needs. In such case, it doesn't matter if MEDIA_TUNER

> > > > is enabled or not.

> > > > 

> > > > As this is due to a Kconfig limitation, I've no idea how to fix or get

> > > > hid of it, but making em28xx dependent of MEDIA_TUNER is wrong.    

> > > 

> > > I don't understand what limitation you see here.   

> > 

> > Before MEDIA_TUNER, what we had was something like:

> > 

> > 	config MEDIA_driver_foo

> > 	select VIDEO_tuner_bar if MEDIA_SUBDRV_AUTOSELECT

> > 	select MEDIA_frontend_foobar if MEDIA_SUBDRV_AUTOSELECT

> > 	...

> > 

> > However, as different I2C drivers had different dependencies, this

> > used to cause lots of troubles. So, one of the Kbuild maintainers

> > came out with the idea of converting from select into depends on.

> > The MEDIA_TUNER is just an ancillary invisible option to make it

> > work at the tuner's side, as usually what we want is to have all

> > tuners selected, as we don't have a one to one mapping about what

> > driver supports what tuner (nor we wanted to do it, as this would

> > mean lots of work for not much gain).  

> 

> Ok

> 

> > > The definition

> > > of the VIDEO_TUNER symbol is an empty 'tristate' symbol with a

> > > dependency on MEDIA_TUNER to ensure we get a warning if MEDIA_TUNER

> > > is not enabled, and to ensure it is set to 'm' if MEDIA_TUNER=m and

> > > a "bool" driver selects VIDEO_TUNER.  

> > 

> > No, VIDEO_TUNER is there because we wanted to be able to use select

> > to enable V4L2 tuner core support and let people to manually select

> > the needed I2C devices with MEDIA_SUBDRV_AUTOSELECT unselected.  

> 

> I meant what the dependency is there for, not the symbol itself.

> It's clear what the symbol does.

> 

> > > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig

> > > index 9beece00869b..1050bdf1848f 100644

> > > --- a/drivers/media/v4l2-core/Kconfig

> > > +++ b/drivers/media/v4l2-core/Kconfig

> > > @@ -37,7 +37,11 @@ config VIDEO_PCI_SKELETON

> > >  # Used by drivers that need tuner.ko

> > >  config VIDEO_TUNER

> > >  	tristate

> > > -	depends on MEDIA_TUNER

> > > +

> > > +config VIDEO_TUNER_MODULE

> > > +	tristate # must not be built-in if MEDIA_TUNER=m because of I2C

> > > +	default y if VIDEO_TUNER=y || MEDIA_TUNER=y

> > > +	default m if VIDEO_TUNER=m  

> > 

> > Doesn't need to worry about that, because all drivers that select VIDEO_TUNER

> > depend on I2C:

> >   

> 

> Ok, then the dependency does not do anything other than generate a

> warning.

> 

> > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig

> > index 9beece00869b..b30e1c879a57 100644

> > --- a/drivers/media/v4l2-core/Kconfig

> > +++ b/drivers/media/v4l2-core/Kconfig

> > @@ -37,7 +37,7 @@ config VIDEO_PCI_SKELETON

> >  # Used by drivers that need tuner.ko

> >  config VIDEO_TUNER

> >  	tristate

> > -	depends on MEDIA_TUNER

> > +	default MEDIA_TUNER

> >  

> >  # Used by drivers that need v4l2-mem2mem.ko

> >  config V4L2_MEM2MEM_DEV  

> 

> So this means it's now enabled if MEDIA_TUNER is enabled, whereas

> before it was only enabled when explicitly selected. That sounds

> like a useful change, but it also seems unrelated to the warning

> fix, and should probably be a separate change, while for now

> we can simply remove the 'depends on' line without any replacement.


True.

> > Ok, if we'll have platform drivers for analog TV using the I2C bus

> > at directly in SoC, then your solution is better, but the tuner core

> > driver may not be the best way of doing it. So, for now, I would use

> > the simpler version.  

> 

> Ok. Do you want me to submit a new version or do you prefer to write

> one yourself? With or without the 'default'?


Feel free to submit a new version without the default.

Thanks!
Mauro

Patch

diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index 75323f5efd0f..cacc757e2254 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -1,6 +1,6 @@ 
 config VIDEO_EM28XX
 	tristate "Empia EM28xx USB devices support"
-	depends on VIDEO_DEV && I2C
+	depends on VIDEO_DEV && I2C && MEDIA_TUNER
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM