diff mbox

[BACKPORT,v4.4-stable] ARM: debug-ll: fix BCM63xx entry for multiplatform

Message ID 1456305995-3173827-1-git-send-email-arnd@arndb.de
State New
Headers show

Commit Message

Arnd Bergmann Feb. 24, 2016, 9:26 a.m. UTC
commit 6c54809977de3c9e2ef9e9934a2c6625f7e161e7 upstream.

During my randconfig build testing, I found that a kernel with
DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:

arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]

It turns out that the DEBUG_UART_BCM63XX option is enabled whenever
the ARCH_BCM_63XX is, and that breaks multiplatform kernels because
we then end up using the UART address from BCM63XX rather than the
one we actually configured (if any).

This changes the BCM63XX options to only have one Kconfig option,
and only enable that if the user explicitly turns it on.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")
Cc: stable@vger.kernel.org
---
 arch/arm/Kconfig.debug | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 259c0ca9c99a..ddbb361267d8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -162,10 +162,9 @@  choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1348,7 +1347,7 @@  config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1364,10 +1363,6 @@  config DEBUG_UART_8250
 		ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
 
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
-
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x00100a00 if DEBUG_NETX_UART
@@ -1462,7 +1457,7 @@  config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1474,7 +1469,7 @@  config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART
 
@@ -1515,7 +1510,7 @@  config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
 	default 0xfd012000 if ARCH_MV78XX0
@@ -1566,7 +1561,7 @@  config DEBUG_UART_VIRT
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT