Applied "ASoC: img: Add documentation for SPDIF in controls" to the asoc tree

Message ID E1ZtzWw-0003Sc-QK@finisterre
State New
Headers show

Commit Message

Mark Brown Nov. 4, 2015, 2:59 p.m.
The patch

   ASoC: img: Add documentation for SPDIF in controls

has been applied to the asoc tree at


All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.


From 9b9136d3899b120029b661e0ce7de7b24e531aec Mon Sep 17 00:00:00 2001
From: "Damien.Horsley" <>

Date: Wed, 4 Nov 2015 14:40:55 +0000
Subject: [PATCH] ASoC: img: Add documentation for SPDIF in controls

Add documentation for the controls present in the SPDIF input
controller driver

Signed-off-by: Damien.Horsley <>

Signed-off-by: Mark Brown <>

 Documentation/sound/alsa/img,spdif-in.txt | 49 +++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/sound/alsa/img,spdif-in.txt


Alsa-devel mailing list


diff --git a/Documentation/sound/alsa/img,spdif-in.txt b/Documentation/sound/alsa/img,spdif-in.txt
new file mode 100644
index 0000000..8b75057
--- /dev/null
+++ b/Documentation/sound/alsa/img,spdif-in.txt
@@ -0,0 +1,49 @@ 
+The Imagination Technologies SPDIF Input controller contains the following
+name='IEC958 Capture Mask',index=0
+This control returns a mask that shows which of the IEC958 status bits
+can be read using the 'IEC958 Capture Default' control.
+name='IEC958 Capture Default',index=0
+This control returns the status bits contained within the SPDIF stream that
+is being received. The 'IEC958 Capture Mask' shows which bits can be read
+from this control.
+name='SPDIF In Multi Frequency Acquire',index=0
+name='SPDIF In Multi Frequency Acquire',index=1
+name='SPDIF In Multi Frequency Acquire',index=2
+name='SPDIF In Multi Frequency Acquire',index=3
+This control is used to attempt acquisition of up to four different sample
+rates. The active rate can be obtained by reading the 'SPDIF In Lock Frequency'
+When the value of this control is set to {0,0,0,0}, the rate given to hw_params
+will determine the single rate the block will capture. Else, the rate given to
+hw_params will be ignored, and the block will attempt capture for each of the
+four sample rates set here.
+If less than four rates are required, the same rate can be specified more than
+name='SPDIF In Lock Frequency',index=0
+This control returns the active capture rate, or 0 if a lock has not been
+name='SPDIF In Lock TRK',index=0
+This control is used to modify the locking/jitter rejection characteristics
+of the block. Larger values increase the locking range, but reduce jitter
+name='SPDIF In Lock Acquire Threshold',index=0
+This control is used to change the threshold at which a lock is acquired.
+name='SPDIF In Lock Release Threshold',index=0
+This control is used to change the threshold at which a lock is released.