@@ -1,6 +1,6 @@
BUILD_FLAGS = -DKTEST
CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS)
-LDFLAGS += -lrt -lpthread
+LDFLAGS += -lrt -lpthread -lm
# these are all "safe" tests that don't modify
# system time or require escalated privileges
@@ -8,7 +8,7 @@ TEST_GEN_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
inconsistency-check raw_skew threadtest rtctest
TEST_GEN_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex adjtick change_skew \
- skew_consistency clocksource-switch leap-a-day \
+ skew_consistency clocksource-switch freq-step leap-a-day \
leapcrash set-tai set-2038 set-tz
@@ -24,6 +24,7 @@ run_destructive_tests: run_tests
./change_skew
./skew_consistency
./clocksource-switch
+ ./freq-step
./leap-a-day -s -i 10
./leapcrash
./set-tz
new file mode 100644
@@ -0,0 +1,268 @@
+/*
+ * This test checks the response of the system clock to frequency
+ * steps made with adjtimex(). The frequency error and stability of
+ * the CLOCK_MONOTONIC clock relative to the CLOCK_MONOTONIC_RAW clock
+ * is measured in two intervals following the step. The test fails if
+ * values from the second interval exceed specified limits.
+ *
+ * Copyright (C) Miroslav Lichvar <mlichvar@redhat.com> 2017
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <math.h>
+#include <stdio.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "../kselftest.h"
+
+#define SAMPLES 100
+#define SAMPLE_READINGS 10
+#define MEAN_SAMPLE_INTERVAL 0.1
+#define STEP_INTERVAL 1.0
+#define MAX_PRECISION 100e-9
+#define MAX_FREQ_ERROR 10e-6
+#define MAX_STDDEV 1000e-9
+
+struct sample {
+ double offset;
+ double time;
+};
+
+static time_t mono_raw_base;
+static time_t mono_base;
+static long user_hz;
+static double precision;
+static double mono_freq_offset;
+
+static double diff_timespec(struct timespec *ts1, struct timespec *ts2)
+{
+ return ts1->tv_sec - ts2->tv_sec + (ts1->tv_nsec - ts2->tv_nsec) / 1e9;
+}
+
+static double get_sample(struct sample *sample)
+{
+ double delay, mindelay = 0.0;
+ struct timespec ts1, ts2, ts3;
+ int i;
+
+ for (i = 0; i < SAMPLE_READINGS; i++) {
+ clock_gettime(CLOCK_MONOTONIC_RAW, &ts1);
+ clock_gettime(CLOCK_MONOTONIC, &ts2);
+ clock_gettime(CLOCK_MONOTONIC_RAW, &ts3);
+
+ ts1.tv_sec -= mono_raw_base;
+ ts2.tv_sec -= mono_base;
+ ts3.tv_sec -= mono_raw_base;
+
+ delay = diff_timespec(&ts3, &ts1);
+ if (delay <= 1e-9) {
+ i--;
+ continue;
+ }
+
+ if (!i || delay < mindelay) {
+ sample->offset = diff_timespec(&ts2, &ts1);
+ sample->offset -= delay / 2.0;
+ sample->time = ts1.tv_sec + ts1.tv_nsec / 1e9;
+ mindelay = delay;
+ }
+ }
+
+ return mindelay;
+}
+
+static void reset_ntp_error(void)
+{
+ struct timex txc;
+
+ txc.modes = ADJ_SETOFFSET;
+ txc.time.tv_sec = 0;
+ txc.time.tv_usec = 0;
+
+ if (adjtimex(&txc) < 0) {
+ perror("[FAIL] adjtimex");
+ ksft_exit_fail();
+ }
+}
+
+static void set_frequency(double freq)
+{
+ struct timex txc;
+ int tick_offset;
+
+ tick_offset = 1e6 * freq / user_hz;
+
+ txc.modes = ADJ_TICK | ADJ_FREQUENCY;
+ txc.tick = 1000000 / user_hz + tick_offset;
+ txc.freq = (1e6 * freq - user_hz * tick_offset) * (1 << 16);
+
+ if (adjtimex(&txc) < 0) {
+ perror("[FAIL] adjtimex");
+ ksft_exit_fail();
+ }
+}
+
+static void regress(struct sample *samples, int n, double *intercept,
+ double *slope, double *r_stddev, double *r_max)
+{
+ double x, y, r, x_sum, y_sum, xy_sum, x2_sum, r2_sum;
+ int i;
+
+ x_sum = 0.0, y_sum = 0.0, xy_sum = 0.0, x2_sum = 0.0;
+
+ for (i = 0; i < n; i++) {
+ x = samples[i].time;
+ y = samples[i].offset;
+
+ x_sum += x;
+ y_sum += y;
+ xy_sum += x * y;
+ x2_sum += x * x;
+ }
+
+ *slope = (xy_sum - x_sum * y_sum / n) / (x2_sum - x_sum * x_sum / n);
+ *intercept = (y_sum - *slope * x_sum) / n;
+
+ *r_max = 0.0, r2_sum = 0.0;
+
+ for (i = 0; i < n; i++) {
+ x = samples[i].time;
+ y = samples[i].offset;
+ r = fabs(x * *slope + *intercept - y);
+ if (*r_max < r)
+ *r_max = r;
+ r2_sum += r * r;
+ }
+
+ *r_stddev = sqrt(r2_sum / n);
+}
+
+static int run_test(int calibration, double freq_base, double freq_step)
+{
+ struct sample samples[SAMPLES];
+ double intercept, slope, stddev1, max1, stddev2, max2;
+ double freq_error1, freq_error2;
+ int i;
+
+ set_frequency(freq_base);
+
+ for (i = 0; i < 10; i++)
+ usleep(1e6 * MEAN_SAMPLE_INTERVAL / 10);
+
+ reset_ntp_error();
+
+ set_frequency(freq_base + freq_step);
+
+ for (i = 0; i < 10; i++)
+ usleep(rand() % 2000000 * STEP_INTERVAL / 10);
+
+ set_frequency(freq_base);
+
+ for (i = 0; i < SAMPLES; i++) {
+ usleep(rand() % 2000000 * MEAN_SAMPLE_INTERVAL);
+ get_sample(&samples[i]);
+ }
+
+ if (calibration) {
+ regress(samples, SAMPLES, &intercept, &slope, &stddev1, &max1);
+ mono_freq_offset = slope;
+ printf("CLOCK_MONOTONIC_RAW frequency offset: %11.3f ppm\n",
+ 1e6 * mono_freq_offset);
+ return 0;
+ }
+
+ regress(samples, SAMPLES / 2, &intercept, &slope, &stddev1, &max1);
+ freq_error1 = slope * (1.0 - mono_freq_offset) - mono_freq_offset -
+ freq_base;
+
+ regress(samples + SAMPLES / 2, SAMPLES / 2, &intercept, &slope,
+ &stddev2, &max2);
+ freq_error2 = slope * (1.0 - mono_freq_offset) - mono_freq_offset -
+ freq_base;
+
+ printf("%6.0f %+10.3f %6.0f %7.0f %+10.3f %6.0f %7.0f\t",
+ 1e6 * freq_step,
+ 1e6 * freq_error1, 1e9 * stddev1, 1e9 * max1,
+ 1e6 * freq_error2, 1e9 * stddev2, 1e9 * max2);
+
+ if (fabs(freq_error2) > MAX_FREQ_ERROR || stddev2 > MAX_STDDEV) {
+ printf("[FAIL]\n");
+ return 1;
+ }
+
+ printf("[OK]\n");
+ return 0;
+}
+
+static void init_test(void)
+{
+ struct timespec ts;
+ struct sample sample;
+
+ if (clock_gettime(CLOCK_MONOTONIC_RAW, &ts)) {
+ perror("[FAIL] clock_gettime(CLOCK_MONOTONIC_RAW)");
+ ksft_exit_fail();
+ }
+
+ mono_raw_base = ts.tv_sec;
+
+ if (clock_gettime(CLOCK_MONOTONIC, &ts)) {
+ perror("[FAIL] clock_gettime(CLOCK_MONOTONIC)");
+ ksft_exit_fail();
+ }
+
+ mono_base = ts.tv_sec;
+
+ user_hz = sysconf(_SC_CLK_TCK);
+
+ precision = get_sample(&sample) / 2.0;
+ printf("CLOCK_MONOTONIC_RAW+CLOCK_MONOTONIC precision: %.0f ns\t\t",
+ 1e9 * precision);
+
+ if (precision > MAX_PRECISION) {
+ printf("[SKIP]\n");
+ ksft_exit_skip();
+ }
+
+ printf("[OK]\n");
+ srand(ts.tv_sec ^ ts.tv_nsec);
+
+ run_test(1, 0.0, 0.0);
+}
+
+int main(int argc, char **argv)
+{
+ double freq_base, freq_step;
+ int i, j, fails = 0;
+
+ init_test();
+
+ printf("Checking response to frequency step:\n");
+ printf(" Step 1st interval 2nd interval\n");
+ printf(" Freq Dev Max Freq Dev Max\n");
+
+ for (i = 2; i >= 0; i--) {
+ for (j = 0; j < 5; j++) {
+ freq_base = (rand() % (1 << 24) - (1 << 23)) / 65536e6;
+ freq_step = 10e-6 * (1 << (6 * i));
+ fails += run_test(0, freq_base, freq_step);
+ }
+ }
+
+ set_frequency(0.0);
+
+ if (fails)
+ ksft_exit_fail();
+
+ ksft_exit_pass();
+}