[5/5] arm64: defconfig: enable some drivers and configs for hi3798cv200-poplar board.

Message ID 1498035645-22804-6-git-send-email-xuejiancheng@hisilicon.com
State New
Headers show
Series
  • enable usb2 function on poplar board.
Related show

Commit Message

Jiancheng Xue June 21, 2017, 9 a.m.
Enable GMAC,I2C,IR,USB2-PHY for hi3798cv200-poplar board.

Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>

---
 arch/arm64/configs/defconfig | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

-- 
1.9.1

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 97c123e..b45d760 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -31,6 +31,8 @@  CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_BCM2835=y
@@ -179,6 +181,7 @@  CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_MACB=y
+CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
 CONFIG_E1000E=y
@@ -259,6 +262,7 @@  CONFIG_I2C_TEGRA=y
 CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_I2C_HIX5HD2=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
@@ -277,6 +281,7 @@  CONFIG_PINCTRL_MSM8994=y
 CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
@@ -322,7 +327,7 @@  CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_S2MPS11=y
-CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
 CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
@@ -359,6 +364,10 @@  CONFIG_BACKLIGHT_GENERIC=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_HIX5HD2=y
+CONFIG_LIRC=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
@@ -488,7 +497,9 @@  CONFIG_PWM_MESON=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_TEGRA=m
+CONFIG_TI_SYSCON_RESET=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y