diff mbox

Applied "ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver" to the asoc tree

Message ID E1dONJw-0006Rb-LE@debutante
State Accepted
Commit 0e15bdfd8b1e3a94862522580161a2d1bb3882a7
Headers show

Commit Message

Mark Brown June 23, 2017, 12:04 p.m. UTC
The patch

   ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 0e15bdfd8b1e3a94862522580161a2d1bb3882a7 Mon Sep 17 00:00:00 2001
From: Baoyou Xie <baoyou.xie@linaro.org>

Date: Thu, 22 Jun 2017 14:51:58 +0800
Subject: [PATCH] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver

It adds ASoC driver for AUD96P22 stereo audio codec integrated on ZTE
ZX family SoCs.  The driver includes the support for a number of volume
and mute controls, and power bits for various playback and recording
components.

Due to that the board for testing only supports playback, recording
support is untested.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Signed-off-by: Mark Brown <broonie@kernel.org>

---
 sound/soc/codecs/Kconfig       |   5 +
 sound/soc/codecs/Makefile      |   2 +
 sound/soc/codecs/zx_aud96p22.c | 403 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 410 insertions(+)
 create mode 100644 sound/soc/codecs/zx_aud96p22.c

-- 
2.13.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
diff mbox

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 883ed4c8a551..3425bbcea2d1 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1114,6 +1114,11 @@  config SND_SOC_WM9713
 	tristate
 	select REGMAP_AC97
 
+config SND_SOC_ZX_AUD96P22
+	tristate "ZTE ZX AUD96P22 CODEC"
+	depends on I2C
+	select REGMAP_I2C
+
 # Amp
 config SND_SOC_LM4857
 	tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 28a63fdaf982..d9858be7796a 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -224,6 +224,7 @@  snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
 snd-soc-wm-hubs-objs := wm_hubs.o
+snd-soc-zx-aud96p22-objs := zx_aud96p22.o
 # Amp
 snd-soc-dio2125-objs := dio2125.o
 snd-soc-max9877-objs := max9877.o
@@ -455,6 +456,7 @@  obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
 obj-$(CONFIG_SND_SOC_WM_ADSP)	+= snd-soc-wm-adsp.o
 obj-$(CONFIG_SND_SOC_WM_HUBS)	+= snd-soc-wm-hubs.o
+obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o
 
 # Amp
 obj-$(CONFIG_SND_SOC_DIO2125)	+= snd-soc-dio2125.o
diff --git a/sound/soc/codecs/zx_aud96p22.c b/sound/soc/codecs/zx_aud96p22.c
new file mode 100644
index 000000000000..032fb7cf6cbd
--- /dev/null
+++ b/sound/soc/codecs/zx_aud96p22.c
@@ -0,0 +1,403 @@ 
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/tlv.h>
+
+#define AUD96P22_RESET			0x00
+#define RST_DAC_DPZ			BIT(0)
+#define RST_ADC_DPZ			BIT(1)
+#define AUD96P22_I2S1_CONFIG_0		0x03
+#define I2S1_MS_MODE			BIT(3)
+#define I2S1_MODE_MASK			0x7
+#define I2S1_MODE_RIGHT_J		0x0
+#define I2S1_MODE_I2S			0x1
+#define I2S1_MODE_LEFT_J		0x2
+#define AUD96P22_PD_0			0x15
+#define AUD96P22_PD_1			0x16
+#define AUD96P22_PD_3			0x18
+#define AUD96P22_PD_4			0x19
+#define AUD96P22_MUTE_0			0x1d
+#define AUD96P22_MUTE_2			0x1f
+#define AUD96P22_MUTE_4			0x21
+#define AUD96P22_RECVOL_0		0x24
+#define AUD96P22_RECVOL_1		0x25
+#define AUD96P22_PGA1VOL_0		0x26
+#define AUD96P22_PGA1VOL_1		0x27
+#define AUD96P22_LMVOL_0		0x34
+#define AUD96P22_LMVOL_1		0x35
+#define AUD96P22_HS1VOL_0		0x38
+#define AUD96P22_HS1VOL_1		0x39
+#define AUD96P22_PGA1SEL_0		0x47
+#define AUD96P22_PGA1SEL_1		0x48
+#define AUD96P22_LDR1SEL_0		0x59
+#define AUD96P22_LDR1SEL_1		0x60
+#define AUD96P22_LDR2SEL_0		0x5d
+#define AUD96P22_REG_MAX		0xfb
+
+struct aud96p22_priv {
+	struct regmap *regmap;
+};
+
+static int aud96p22_adc_event(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec);
+	struct regmap *regmap = priv->regmap;
+
+	if (event != SND_SOC_DAPM_POST_PMU)
+		return -EINVAL;
+
+	/* Assert/de-assert the bit to reset ADC data path  */
+	regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, 0);
+	regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, RST_ADC_DPZ);
+
+	return 0;
+}
+
+static int aud96p22_dac_event(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec);
+	struct regmap *regmap = priv->regmap;
+
+	if (event != SND_SOC_DAPM_POST_PMU)
+		return -EINVAL;
+
+	/* Assert/de-assert the bit to reset DAC data path  */
+	regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, 0);
+	regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, RST_DAC_DPZ);
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(lm_tlv, -11550, 50, 0);
+static const DECLARE_TLV_DB_SCALE(hs_tlv, -3900, 300, 0);
+static const DECLARE_TLV_DB_SCALE(rec_tlv, -9550, 50, 0);
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -1800, 100, 0);
+
+static const struct snd_kcontrol_new aud96p22_snd_controls[] = {
+	/* Volume control */
+	SOC_DOUBLE_R_TLV("Master Playback Volume", AUD96P22_LMVOL_0,
+			 AUD96P22_LMVOL_1, 0, 0xff, 0, lm_tlv),
+	SOC_DOUBLE_R_TLV("Headphone Volume", AUD96P22_HS1VOL_0,
+			 AUD96P22_HS1VOL_1, 0, 0xf, 0, hs_tlv),
+	SOC_DOUBLE_R_TLV("Master Capture Volume", AUD96P22_RECVOL_0,
+			 AUD96P22_RECVOL_1, 0, 0xff, 0, rec_tlv),
+	SOC_DOUBLE_R_TLV("Analogue Capture Volume", AUD96P22_PGA1VOL_0,
+			 AUD96P22_PGA1VOL_1, 0, 0x37, 0, pga_tlv),
+
+	/* Mute control */
+	SOC_DOUBLE("Master Playback Switch", AUD96P22_MUTE_2, 0, 1, 1, 1),
+	SOC_DOUBLE("Headphone Switch", AUD96P22_MUTE_2, 4, 5, 1, 1),
+	SOC_DOUBLE("Line Out Switch", AUD96P22_MUTE_4, 0, 1, 1, 1),
+	SOC_DOUBLE("Speaker Switch", AUD96P22_MUTE_4, 2, 3, 1, 1),
+	SOC_DOUBLE("Master Capture Switch", AUD96P22_MUTE_0, 0, 1, 1, 1),
+	SOC_DOUBLE("Analogue Capture Switch", AUD96P22_MUTE_0, 2, 3, 1, 1),
+};
+
+/* Input mux kcontrols */
+static const unsigned int ain_mux_values[] = {
+	0, 1, 3, 4, 5,
+};
+
+static const char * const ainl_mux_texts[] = {
+	"AINL1 differential",
+	"AINL1 single-ended",
+	"AINL3 single-ended",
+	"AINL2 differential",
+	"AINL2 single-ended",
+};
+
+static const char * const ainr_mux_texts[] = {
+	"AINR1 differential",
+	"AINR1 single-ended",
+	"AINR3 single-ended",
+	"AINR2 differential",
+	"AINR2 single-ended",
+};
+
+static SOC_VALUE_ENUM_SINGLE_DECL(ainl_mux_enum, AUD96P22_PGA1SEL_0,
+				  0, 0x7, ainl_mux_texts, ain_mux_values);
+static SOC_VALUE_ENUM_SINGLE_DECL(ainr_mux_enum, AUD96P22_PGA1SEL_1,
+				  0, 0x7, ainr_mux_texts, ain_mux_values);
+
+static const struct snd_kcontrol_new ainl_mux_kcontrol =
+			SOC_DAPM_ENUM("AINL Mux", ainl_mux_enum);
+static const struct snd_kcontrol_new ainr_mux_kcontrol =
+			SOC_DAPM_ENUM("AINR Mux", ainr_mux_enum);
+
+/* Output mixer kcontrols */
+static const struct snd_kcontrol_new ld1_left_kcontrols[] = {
+	SOC_DAPM_SINGLE("DACL LD1L Switch", AUD96P22_LDR1SEL_0, 0, 1, 0),
+	SOC_DAPM_SINGLE("AINL LD1L Switch", AUD96P22_LDR1SEL_0, 1, 1, 0),
+	SOC_DAPM_SINGLE("AINR LD1L Switch", AUD96P22_LDR1SEL_0, 2, 1, 0),
+};
+
+static const struct snd_kcontrol_new ld1_right_kcontrols[] = {
+	SOC_DAPM_SINGLE("DACR LD1R Switch", AUD96P22_LDR1SEL_1, 8, 1, 0),
+	SOC_DAPM_SINGLE("AINR LD1R Switch", AUD96P22_LDR1SEL_1, 9, 1, 0),
+	SOC_DAPM_SINGLE("AINL LD1R Switch", AUD96P22_LDR1SEL_1, 10, 1, 0),
+};
+
+static const struct snd_kcontrol_new ld2_kcontrols[] = {
+	SOC_DAPM_SINGLE("DACL LD2 Switch", AUD96P22_LDR2SEL_0, 0, 1, 0),
+	SOC_DAPM_SINGLE("AINL LD2 Switch", AUD96P22_LDR2SEL_0, 1, 1, 0),
+	SOC_DAPM_SINGLE("DACR LD2 Switch", AUD96P22_LDR2SEL_0, 2, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget aud96p22_dapm_widgets[] = {
+	/* Overall power bit */
+	SND_SOC_DAPM_SUPPLY("POWER", AUD96P22_PD_0, 0, 0, NULL, 0),
+
+	/* Input pins */
+	SND_SOC_DAPM_INPUT("AINL1P"),
+	SND_SOC_DAPM_INPUT("AINL2P"),
+	SND_SOC_DAPM_INPUT("AINL3"),
+	SND_SOC_DAPM_INPUT("AINL1N"),
+	SND_SOC_DAPM_INPUT("AINL2N"),
+	SND_SOC_DAPM_INPUT("AINR2N"),
+	SND_SOC_DAPM_INPUT("AINR1N"),
+	SND_SOC_DAPM_INPUT("AINR3"),
+	SND_SOC_DAPM_INPUT("AINR2P"),
+	SND_SOC_DAPM_INPUT("AINR1P"),
+
+	/* Input muxes */
+	SND_SOC_DAPM_MUX("AINLMUX", AUD96P22_PD_1, 2, 0, &ainl_mux_kcontrol),
+	SND_SOC_DAPM_MUX("AINRMUX", AUD96P22_PD_1, 3, 0, &ainr_mux_kcontrol),
+
+	/* ADCs */
+	SND_SOC_DAPM_ADC_E("ADCL", "Capture Left", AUD96P22_PD_1, 0, 0,
+			   aud96p22_adc_event, SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_ADC_E("ADCR", "Capture Right", AUD96P22_PD_1, 1, 0,
+			   aud96p22_adc_event, SND_SOC_DAPM_POST_PMU),
+
+	/* DACs */
+	SND_SOC_DAPM_DAC_E("DACL", "Playback Left", AUD96P22_PD_3, 0, 0,
+			   aud96p22_dac_event, SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_DAC_E("DACR", "Playback Right", AUD96P22_PD_3, 1, 0,
+			   aud96p22_dac_event, SND_SOC_DAPM_POST_PMU),
+
+	/* Output mixers */
+	SND_SOC_DAPM_MIXER("LD1L", AUD96P22_PD_3, 6, 0, ld1_left_kcontrols,
+			   ARRAY_SIZE(ld1_left_kcontrols)),
+	SND_SOC_DAPM_MIXER("LD1R", AUD96P22_PD_3, 7, 0, ld1_right_kcontrols,
+			   ARRAY_SIZE(ld1_right_kcontrols)),
+	SND_SOC_DAPM_MIXER("LD2", AUD96P22_PD_4, 2, 0, ld2_kcontrols,
+			   ARRAY_SIZE(ld2_kcontrols)),
+
+	/* Headset power switch */
+	SND_SOC_DAPM_SUPPLY("HS1L", AUD96P22_PD_3, 4, 0, NULL, 0),
+	SND_SOC_DAPM_SUPPLY("HS1R", AUD96P22_PD_3, 5, 0, NULL, 0),
+
+	/* Output pins */
+	SND_SOC_DAPM_OUTPUT("HSOUTL"),
+	SND_SOC_DAPM_OUTPUT("LINEOUTL"),
+	SND_SOC_DAPM_OUTPUT("LINEOUTMP"),
+	SND_SOC_DAPM_OUTPUT("LINEOUTMN"),
+	SND_SOC_DAPM_OUTPUT("LINEOUTR"),
+	SND_SOC_DAPM_OUTPUT("HSOUTR"),
+};
+
+static const struct snd_soc_dapm_route aud96p22_dapm_routes[] = {
+	{ "AINLMUX", "AINL1 differential", "AINL1N" },
+	{ "AINLMUX", "AINL1 single-ended", "AINL1P" },
+	{ "AINLMUX", "AINL3 single-ended", "AINL3" },
+	{ "AINLMUX", "AINL2 differential", "AINL2N" },
+	{ "AINLMUX", "AINL2 single-ended", "AINL2P" },
+
+	{ "AINRMUX", "AINR1 differential", "AINR1N" },
+	{ "AINRMUX", "AINR1 single-ended", "AINR1P" },
+	{ "AINRMUX", "AINR3 single-ended", "AINR3" },
+	{ "AINRMUX", "AINR2 differential", "AINR2N" },
+	{ "AINRMUX", "AINR2 single-ended", "AINR2P" },
+
+	{ "ADCL", NULL, "AINLMUX" },
+	{ "ADCR", NULL, "AINRMUX" },
+
+	{ "ADCL", NULL, "POWER" },
+	{ "ADCR", NULL, "POWER" },
+	{ "DACL", NULL, "POWER" },
+	{ "DACR", NULL, "POWER" },
+
+	{ "LD1L", "DACL LD1L Switch", "DACL" },
+	{ "LD1L", "AINL LD1L Switch", "AINLMUX" },
+	{ "LD1L", "AINR LD1L Switch", "AINRMUX" },
+
+	{ "LD1R", "DACR LD1R Switch", "DACR" },
+	{ "LD1R", "AINR LD1R Switch", "AINRMUX" },
+	{ "LD1R", "AINL LD1R Switch", "AINLMUX" },
+
+	{ "LD2", "DACL LD2 Switch", "DACL" },
+	{ "LD2", "AINL LD2 Switch", "AINLMUX" },
+	{ "LD2", "DACR LD2 Switch", "DACR" },
+
+	{ "HSOUTL", NULL, "LD1L" },
+	{ "HSOUTR", NULL, "LD1R" },
+	{ "HSOUTL", NULL, "HS1L" },
+	{ "HSOUTR", NULL, "HS1R" },
+
+	{ "LINEOUTL", NULL, "LD1L" },
+	{ "LINEOUTR", NULL, "LD1R" },
+
+	{ "LINEOUTMP", NULL, "LD2" },
+	{ "LINEOUTMN", NULL, "LD2" },
+};
+
+static struct snd_soc_codec_driver aud96p22_driver = {
+	.component_driver = {
+		.controls = aud96p22_snd_controls,
+		.num_controls = ARRAY_SIZE(aud96p22_snd_controls),
+		.dapm_widgets = aud96p22_dapm_widgets,
+		.num_dapm_widgets = ARRAY_SIZE(aud96p22_dapm_widgets),
+		.dapm_routes = aud96p22_dapm_routes,
+		.num_dapm_routes = ARRAY_SIZE(aud96p22_dapm_routes),
+	},
+};
+
+static int aud96p22_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(dai->codec);
+	struct regmap *regmap = priv->regmap;
+	unsigned int val;
+
+	/* Master/slave mode */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		val = 0;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		val = I2S1_MS_MODE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MS_MODE, val);
+
+	/* Audio format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		val = I2S1_MODE_RIGHT_J;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		val = I2S1_MODE_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		val = I2S1_MODE_LEFT_J;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MODE_MASK, val);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops aud96p22_dai_ops = {
+	.set_fmt = aud96p22_set_fmt,
+};
+
+#define AUD96P22_RATES	SNDRV_PCM_RATE_8000_192000
+#define AUD96P22_FORMATS (\
+		SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \
+		SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_driver aud96p22_dai = {
+	.name = "aud96p22-dai",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = AUD96P22_RATES,
+		.formats = AUD96P22_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = AUD96P22_RATES,
+		.formats = AUD96P22_FORMATS,
+	},
+	.ops = &aud96p22_dai_ops,
+};
+
+static const struct regmap_config aud96p22_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = AUD96P22_REG_MAX,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int aud96p22_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct aud96p22_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &aud96p22_regmap);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(dev, "failed to init i2c regmap: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(i2c, priv);
+
+	ret = snd_soc_register_codec(dev, &aud96p22_driver, &aud96p22_dai, 1);
+	if (ret) {
+		dev_err(dev, "failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int aud96p22_i2c_remove(struct i2c_client *i2c)
+{
+	snd_soc_unregister_codec(&i2c->dev);
+	return 0;
+}
+
+const struct of_device_id aud96p22_dt_ids[] = {
+	{ .compatible = "zte,zx-aud96p22", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, aud96p22_dt_ids);
+
+static struct i2c_driver aud96p22_i2c_driver = {
+	.driver = {
+		.name = "zx_aud96p22",
+		.of_match_table = aud96p22_dt_ids,
+	},
+	.probe = aud96p22_i2c_probe,
+	.remove = aud96p22_i2c_remove,
+};
+module_i2c_driver(aud96p22_i2c_driver);
+
+MODULE_DESCRIPTION("ZTE ASoC AUD96P22 CODEC driver");
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_LICENSE("GPL v2");