diff mbox series

[3/5] arm64: dts: msm8996: Add modem smp2p nodes

Message ID 20170725054705.20674-4-bjorn.andersson@linaro.org
State Superseded
Headers show
Series [1/5] arm64: dts: qcom: Add RPM glink nodes to msm8996 | expand

Commit Message

Bjorn Andersson July 25, 2017, 5:47 a.m. UTC
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

-- 
2.12.0

Comments

Stephen Boyd July 25, 2017, 5:29 p.m. UTC | #1
On 07/24/2017 10:47 PM, Bjorn Andersson wrote:
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---

>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++++++++++++++

>  1 file changed, 24 insertions(+)

>

> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> index 8ebef05e1750..7d909546ca24 100644

> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi

> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

> @@ -662,6 +662,30 @@

>  		};

>  	};

>  

> +	modem-smp2p {

> +		compatible = "qcom,smp2p";

> +		qcom,smem = <435>, <428>;

> +

> +		interrupts = <0 451 IRQ_TYPE_EDGE_RISING>;


s/0/GIC_SPI/?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8ebef05e1750..7d909546ca24 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -662,6 +662,30 @@ 
 		};
 	};
 
+	modem-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <0 451 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 16 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	smp2p-slpi {
 		compatible = "qcom,smp2p";
 		qcom,smem = <481>, <430>;