[v2,2/2] drm/bridge: adv7511: restrict audio sample sizes

Message ID 20170731224944.9986-3-srinivas.kandagatla@linaro.org
State New
Headers show
Series
  • ASoC: hdmi-codec: Allow driver to restrict sample size
Related show

Commit Message

Srinivas Kandagatla July 31, 2017, 10:49 p.m.
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

ADV7533 only supports audio samples word width from 16-24 bits.
This patch restricts the audio sample sizes to the supported ones,
so that sound card does not report wrong list of supported hwparms.

Without this patch aplay would fail when playing a 32 bit audio.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Srinivas Kandagatla Aug. 1, 2017, 12:24 p.m. | #1
On 01/08/17 09:42, Arnaud Pouliquen wrote:
> Hello Srinivas,
> 
> On 08/01/2017 12:49 AM, srinivas.kandagatla@linaro.org wrote:
>> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>>
>> ADV7533 only supports audio samples word width from 16-24 bits.
>> This patch restricts the audio sample sizes to the supported ones,
>> so that sound card does not report wrong list of supported hwparms.
>>
>> Without this patch aplay would fail when playing a 32 bit audio.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
>> index 67469c26bae8..d01d0aa0eef7 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
>> @@ -214,6 +214,8 @@ static struct hdmi_codec_pdata codec_data = {
>>   	.ops = &adv7511_codec_ops,
>>   	.max_i2s_channels = 2,
>>   	.i2s = 1,
>> +	.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
>> +		    SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE),
>>   };
> 
> I'm not sure that this limitation is needed.
> I already used ADV7513 and i did not observe this limitation.
> 
> I had a look to ADV7533 data-sheet. it should support 32 and 64 bits I2S

ADV7511_REG_AUDIO_CFG3(0x14) register definition in datasheet and the 
code in this driver suggest that It only supports 16Bit and 24Bit samples.

> format bus, with 16 or 24 bits precision sample. So it should support
> SNDRV_PCM_FMTBIT_S32_LE and SNDRV_PCM_FMTBIT_S32_BE
> 
> As example, if you configure bus in Left justified format with 24 bits
> sample length, 32 bits application samples should be truncated to 24
> bits samples at ADV7533 I2S interface level (LSB dropped).
May be we can do that to make the user happy but isn't this just 
truncate the resolution to 24Bit then?

And it's a false indication that we are supporting 32bit samples.
Which am not very happy with.


> 
> Perhaps i missed something... but look like more an I2S bus
> configuration issue in your DT card description, that that a miss in the
> drivers.

Nothing to do with DT or other driver, adv7533 audio driver does not 
support 32 bit sample size which is why it would return -EINVAL from
adv7511_hdmi_hw_params().

This patch is fixing the loose ends, by which I mean the card would 
report the exact supported sample sizes to user rather than every thing 
in the I2S_FORMATS list.


Thanks,
srini

> 
> Regards
> Arnaud
>>   
>>   int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)
>>
Srinivas Kandagatla Aug. 1, 2017, 12:52 p.m. | #2
On 01/08/17 13:28, Mark Brown wrote:
> On Tue, Aug 01, 2017 at 01:24:03PM +0100, Srinivas Kandagatla wrote:
>> On 01/08/17 09:42, Arnaud Pouliquen wrote:
>>> On 08/01/2017 12:49 AM, srinivas.kandagatla@linaro.org wrote:
> 
>>> I already used ADV7513 and i did not observe this limitation.
> 
>>> I had a look to ADV7533 data-sheet. it should support 32 and 64 bits I2S
> 
>> ADV7511_REG_AUDIO_CFG3(0x14) register definition in datasheet and the code
>> in this driver suggest that It only supports 16Bit and 24Bit samples.
> 
> The amount of data it pays attention to in the frame is not the same as
> the size of the frame.
I agree.

> 
>>> format bus, with 16 or 24 bits precision sample. So it should support
>>> SNDRV_PCM_FMTBIT_S32_LE and SNDRV_PCM_FMTBIT_S32_BE
> 
>>> As example, if you configure bus in Left justified format with 24 bits
>>> sample length, 32 bits application samples should be truncated to 24
>>> bits samples at ADV7533 I2S interface level (LSB dropped).
> 
>> May be we can do that to make the user happy but isn't this just truncate
>> the resolution to 24Bit then?
> 
>> And it's a false indication that we are supporting 32bit samples.
>> Which am not very happy with.
> 
> This is what the sample_bits field in the DAI structure is for.ya.
But still reporting that driver supports 32 bit samples when it does not 
really support all 32 bits, is kinda misleading to user.
Isn't it?

And the driver would be end up with hacked up code for each case.


--srini

>

Patch

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index 67469c26bae8..d01d0aa0eef7 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -214,6 +214,8 @@  static struct hdmi_codec_pdata codec_data = {
 	.ops = &adv7511_codec_ops,
 	.max_i2s_channels = 2,
 	.i2s = 1,
+	.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
+		    SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE),
 };
 
 int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)