new file mode 100644
@@ -0,0 +1,86 @@
+TI Davinci DSP devices
+=======================
+
+Binding status: Unstable - Subject to changes for DT representation of clocks
+ and resets
+
+The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
+is used to offload some of the processor-intensive tasks or algorithms, for
+achieving various system level goals.
+
+The processor cores in the sub-system usually contain additional sub-modules
+like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+controller, a dedicated local power/sleep controller etc. The DSP processor
+core used in Davinci SoCs is usually a C674x DSP CPU.
+
+DSP Device Node:
+================
+Each DSP Core sub-system is represented as a single DT node.
+
+Required properties:
+--------------------
+The following are the mandatory properties:
+
+- compatible: Should be one of the following,
+ "ti,da850-dsp" for DSPs on OMAP-L138 SoCs
+
+- reg: Should contain an entry for each value in 'reg-names'.
+ Each entry should have the memory region's start address
+ and the size of the region, the representation matching
+ the parent node's '#address-cells' and '#size-cells' values.
+
+- reg-names: Should contain strings with the following names, each
+ representing a specific internal memory region or a
+ specific register space,
+ "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base"
+
+- interrupts: Should contain the interrupt number used to receive the
+ interrupts from the DSP. The value should follow the
+ interrupt-specifier format as dictated by the
+ 'interrupt-parent' node.
+
+- memory-region: phandle to the reserved memory node to be associated
+ with the remoteproc device. The reserved memory node
+ can be a CMA memory node, and should be defined as
+ per the bindings in
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+Optional properties:
+--------------------
+- interrupt-parent: phandle to the interrupt controller node. This property
+ is needed if the device node hierarchy doesn't have an
+ interrupt controller.
+
+
+Example:
+--------
+
+ /* DSP Reserved Memory node */
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dsp_memory_region: dsp-memory@c3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xc3000000 0x1000000>;
+ reusable;
+ };
+ };
+
+ /* DSP node */
+ {
+ dsp: dsp@11800000 {
+ compatible = "ti,da850-dsp";
+ reg = <0x11800000 0x40000>,
+ <0x11e00000 0x8000>,
+ <0x11f00000 0x8000>,
+ <0x01c14044 0x4>,
+ <0x01c14174 0x8>;
+ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg",
+ "chipsig";
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ memory-region = <&dsp_memory_region>;
+ };
+ };
Add the device tree bindings document for the DSP processor subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> --- v2: - Updated the patch header - Revised the binding status statement slightly - Updated the example to address Rob's comments - No changes in properties description themselves v1: https://patchwork.kernel.org/patch/9751269/ .../bindings/remoteproc/ti,davinci-rproc.txt | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt -- 2.13.1