| Message ID | 20170808190510.11496-1-linus.walleij@linaro.org |
|---|---|
| State | Accepted |
| Commit | 2acc717b7a196c355f3a126a9ac4e9df784113e7 |
| Headers | show |
On 08/08/2017 09:05 PM, Linus Walleij wrote: > I wrote a proper pin control driver for the Gemini. Retire this > SoC-specific pad control and rely on the pin controller to manage > this. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Thanks! > --- > drivers/mtd/maps/physmap_of_gemini.c | 16 ---------------- > 1 file changed, 16 deletions(-) > > diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c > index 05b286b5289f..4ed1a6bb4d3c 100644 > --- a/drivers/mtd/maps/physmap_of_gemini.c > +++ b/drivers/mtd/maps/physmap_of_gemini.c > @@ -43,13 +43,6 @@ > > #define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ > > -/* Miscellaneous Control Register */ > -#define GLOBAL_MISC_CTRL 0x30 > -#define FLASH_PADS_MASK 0x07 > -#define NAND_PADS_DISABLE BIT(2) > -#define PFLASH_PADS_DISABLE BIT(1) > -#define SFLASH_PADS_DISABLE BIT(0) > - > static const struct of_device_id syscon_match[] = { > { .compatible = "cortina,gemini-syscon" }, > { }, > @@ -102,15 +95,6 @@ int of_flash_probe_gemini(struct platform_device *pdev, > map->bankwidth * 8); > } > > - /* Activate parallel (NOR flash) mode */ > - ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, > - FLASH_PADS_MASK, > - SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); > - if (ret) { > - dev_err(dev, "unable to set up physmap pads\n"); > - return -ENODEV; > - } > - > dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); > > return 0; > -- Best regards, Marek Vasut ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Le Tue, 8 Aug 2017 21:05:10 +0200, Linus Walleij <linus.walleij@linaro.org> a écrit : > I wrote a proper pin control driver for the Gemini. Retire this > SoC-specific pad control and rely on the pin controller to manage > this. > Applied to l2-mtd/master. Thanks, Boris > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/mtd/maps/physmap_of_gemini.c | 16 ---------------- > 1 file changed, 16 deletions(-) > > diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c > index 05b286b5289f..4ed1a6bb4d3c 100644 > --- a/drivers/mtd/maps/physmap_of_gemini.c > +++ b/drivers/mtd/maps/physmap_of_gemini.c > @@ -43,13 +43,6 @@ > > #define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ > > -/* Miscellaneous Control Register */ > -#define GLOBAL_MISC_CTRL 0x30 > -#define FLASH_PADS_MASK 0x07 > -#define NAND_PADS_DISABLE BIT(2) > -#define PFLASH_PADS_DISABLE BIT(1) > -#define SFLASH_PADS_DISABLE BIT(0) > - > static const struct of_device_id syscon_match[] = { > { .compatible = "cortina,gemini-syscon" }, > { }, > @@ -102,15 +95,6 @@ int of_flash_probe_gemini(struct platform_device *pdev, > map->bankwidth * 8); > } > > - /* Activate parallel (NOR flash) mode */ > - ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, > - FLASH_PADS_MASK, > - SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); > - if (ret) { > - dev_err(dev, "unable to set up physmap pads\n"); > - return -ENODEV; > - } > - > dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); > > return 0;
diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c index 05b286b5289f..4ed1a6bb4d3c 100644 --- a/drivers/mtd/maps/physmap_of_gemini.c +++ b/drivers/mtd/maps/physmap_of_gemini.c @@ -43,13 +43,6 @@ #define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ -/* Miscellaneous Control Register */ -#define GLOBAL_MISC_CTRL 0x30 -#define FLASH_PADS_MASK 0x07 -#define NAND_PADS_DISABLE BIT(2) -#define PFLASH_PADS_DISABLE BIT(1) -#define SFLASH_PADS_DISABLE BIT(0) - static const struct of_device_id syscon_match[] = { { .compatible = "cortina,gemini-syscon" }, { }, @@ -102,15 +95,6 @@ int of_flash_probe_gemini(struct platform_device *pdev, map->bankwidth * 8); } - /* Activate parallel (NOR flash) mode */ - ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, - FLASH_PADS_MASK, - SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); - if (ret) { - dev_err(dev, "unable to set up physmap pads\n"); - return -ENODEV; - } - dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); return 0;
I wrote a proper pin control driver for the Gemini. Retire this SoC-specific pad control and rely on the pin controller to manage this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/mtd/maps/physmap_of_gemini.c | 16 ---------------- 1 file changed, 16 deletions(-) -- 2.9.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/