mmc: mmci: stop building qcom dml as module

Message ID 20170810145418.4430-1-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla Aug. 10, 2017, 2:54 p.m.
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


It does not make sense for qcom dml code to be a seperate module, as
this has just 2 helper functions specific to qcom, and used directly by
mmci driver, so just compile this along with main mmci driver.

This would also fix issues arrising due to Kconfig combinations between
mmci and qcom dml.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/mmc/host/Kconfig         | 2 +-
 drivers/mmc/host/Makefile        | 5 +++--
 drivers/mmc/host/mmci_qcom_dml.h | 2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Srinivas Kandagatla Aug. 30, 2017, 12:20 p.m. | #1
>> -#ifdef CONFIG_MMC_QCOM_DML

>> +#if IS_ENABLED(CONFIG_MMC_QCOM_DML)

> 

> Because you change CONFIG_MMC_QCOM_DML beeing a bool instead of

> tristate, then I don't think you need to change this to IS_ENABLED().

> 

> Correct!?

Yep, that's correct Will respin the patch without this change


> 

>>   int dml_hw_init(struct mmci_host *host, struct device_node *np);

>>   void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);

>>   #else

>> --

>> 2.9.3

>>

> 

> Otherwise this looks good to me.

> 

> Kind regards

> Uffe

> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5755b69..3345384 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -15,7 +15,7 @@  config MMC_ARMMMCI
 	  If unsure, say N.
 
 config MMC_QCOM_DML
-	tristate "Qualcomm Data Mover for SD Card Controller"
+	bool "Qualcomm Data Mover for SD Card Controller"
 	depends on MMC_ARMMMCI && QCOM_BAM_DMA
 	default y
 	help
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 4d45471..ef12fd2 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -2,8 +2,9 @@ 
 # Makefile for MMC/SD host controller drivers
 #
 
-obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
-obj-$(CONFIG_MMC_QCOM_DML)	+= mmci_qcom_dml.o
+obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
+armmmci-y := mmci.o
+armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h
index 6e405d0..9df32eb 100644
--- a/drivers/mmc/host/mmci_qcom_dml.h
+++ b/drivers/mmc/host/mmci_qcom_dml.h
@@ -15,7 +15,7 @@ 
 #ifndef __MMC_QCOM_DML_H__
 #define __MMC_QCOM_DML_H__
 
-#ifdef CONFIG_MMC_QCOM_DML
+#if IS_ENABLED(CONFIG_MMC_QCOM_DML)
 int dml_hw_init(struct mmci_host *host, struct device_node *np);
 void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);
 #else