diff mbox

[v3] pwm: Fix compilation error when CONFIG_PWM is not defined

Message ID 1347440412-17249-1-git-send-email-tushar.behera@linaro.org
State Superseded
Headers show

Commit Message

Tushar Behera Sept. 12, 2012, 9 a.m. UTC
Add dummy implemention of public symbols for compilation-safe inclusion
of include/linux/pwm.h file when CONFIG_PWM is not defined.

Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
Changes since v2:
* #if condition for legacy functions modified
* Reverted layout changes, can be taken up when HAVE_PWM is no longer
required.

Changes since v1:
* Incorporated Thierry's suggestions regarding adding dummy function
implemention for all global functions
* Reorganized header file to have structure definitions first and then the
function definitions.

 include/linux/pwm.h |   69 ++++++++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 66 insertions(+), 3 deletions(-)

Comments

Thierry Reding Sept. 12, 2012, 9:41 a.m. UTC | #1
On Wed, Sep 12, 2012 at 02:30:12PM +0530, Tushar Behera wrote:
> Add dummy implemention of public symbols for compilation-safe inclusion
> of include/linux/pwm.h file when CONFIG_PWM is not defined.
> 
> Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
> ---
> Changes since v2:
> * #if condition for legacy functions modified
> * Reverted layout changes, can be taken up when HAVE_PWM is no longer
> required.
> 
> Changes since v1:
> * Incorporated Thierry's suggestions regarding adding dummy function
> implemention for all global functions
> * Reorganized header file to have structure definitions first and then the
> function definitions.
> 
>  include/linux/pwm.h |   69 ++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 files changed, 66 insertions(+), 3 deletions(-)

This is starting to look real good. Two more things I forgot to mention
on the last round. And one nitpick.

> diff --git a/include/linux/pwm.h b/include/linux/pwm.h
> index 21d076c..2c5daa9 100644
> --- a/include/linux/pwm.h
> +++ b/include/linux/pwm.h
> @@ -6,6 +6,7 @@
>  struct pwm_device;
>  struct seq_file;
>  
> +#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
>  /*
>   * pwm_request - request a PWM device
>   */
> @@ -30,8 +31,29 @@ int pwm_enable(struct pwm_device *pwm);
>   * pwm_disable - stop a PWM output toggling
>   */
>  void pwm_disable(struct pwm_device *pwm);
> +#else
> +static inline struct pwm_device *pwm_request(int pwm_id, const char *label)
> +{
> +	return NULL;
> +}
> +
> +static inline void pwm_free(struct pwm_device *pwm)
> +{}

These should also go on separate lines. I should have been more clear
about that. So:

	static inline void pwm_free(struct pwm_device *pwm)
	{
	}

There are a couple more of these below.

> +
> +static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
> +{
> +	return -EINVAL;
> +}
> +
> +static inline int pwm_enable(struct pwm_device *pwm)
> +{
> +	return -EINVAL;
> +}
> +
> +static inline void pwm_disable(struct pwm_device *pwm)
> +{}
> +#endif /* !(IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)) */

I don't think this comment is necessary. Most editors allow you to jump
to the matching #if or #else. Mostly these comments just confuse me.

>  
> -#ifdef CONFIG_PWM
>  struct pwm_chip;
>  
>  enum {
> @@ -113,6 +135,7 @@ struct pwm_chip {
>  	unsigned int		of_pwm_n_cells;
>  };
>  
> +#if IS_ENABLED(CONFIG_PWM)
>  int pwm_set_chip_data(struct pwm_device *pwm, void *data);
>  void *pwm_get_chip_data(struct pwm_device *pwm);
>  
> @@ -124,6 +147,43 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
>  
>  struct pwm_device *pwm_get(struct device *dev, const char *consumer);
>  void pwm_put(struct pwm_device *pwm);
> +#else
> +static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
> +{
> +	return -EINVAL;
> +}
> +
> +static inline void *pwm_get_chip_data(struct pwm_device *pwm)
> +{
> +	return NULL;
> +}
> +
> +static inline int pwmchip_add(struct pwm_chip *chip)
> +{
> +	return -EINVAL;
> +}
> +
> +static inline int pwmchip_remove(struct pwm_chip *chip)
> +{
> +	return -EINVAL;
> +}
> +
> +static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
> +		unsigned int index,
> +		const char *label)
> +{
> +	return NULL;
> +}
> +
> +static inline struct pwm_device *pwm_get(struct device *dev,
> +		const char *consumer)
> +{
> +	return NULL;
> +}

Can you align the split parameter list on subsequent lines with the
first parameter, please? Like so:

static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
						       unsigned int index,
						       const char *label)

static inline struct pwm_device *pwm_get(struct device *dev,
					 const char *consumer)

Thierry
diff mbox

Patch

diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 21d076c..2c5daa9 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -6,6 +6,7 @@ 
 struct pwm_device;
 struct seq_file;
 
+#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
 /*
  * pwm_request - request a PWM device
  */
@@ -30,8 +31,29 @@  int pwm_enable(struct pwm_device *pwm);
  * pwm_disable - stop a PWM output toggling
  */
 void pwm_disable(struct pwm_device *pwm);
+#else
+static inline struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	return NULL;
+}
+
+static inline void pwm_free(struct pwm_device *pwm)
+{}
+
+static inline int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	return -EINVAL;
+}
+
+static inline int pwm_enable(struct pwm_device *pwm)
+{
+	return -EINVAL;
+}
+
+static inline void pwm_disable(struct pwm_device *pwm)
+{}
+#endif /* !(IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)) */
 
-#ifdef CONFIG_PWM
 struct pwm_chip;
 
 enum {
@@ -113,6 +135,7 @@  struct pwm_chip {
 	unsigned int		of_pwm_n_cells;
 };
 
+#if IS_ENABLED(CONFIG_PWM)
 int pwm_set_chip_data(struct pwm_device *pwm, void *data);
 void *pwm_get_chip_data(struct pwm_device *pwm);
 
@@ -124,6 +147,43 @@  struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
 
 struct pwm_device *pwm_get(struct device *dev, const char *consumer);
 void pwm_put(struct pwm_device *pwm);
+#else
+static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+	return -EINVAL;
+}
+
+static inline void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+	return NULL;
+}
+
+static inline int pwmchip_add(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline int pwmchip_remove(struct pwm_chip *chip)
+{
+	return -EINVAL;
+}
+
+static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+		unsigned int index,
+		const char *label)
+{
+	return NULL;
+}
+
+static inline struct pwm_device *pwm_get(struct device *dev,
+		const char *consumer)
+{
+	return NULL;
+}
+
+static inline void pwm_put(struct pwm_device *pwm)
+{}
+#endif /* !IS_ENABLED(CONFIG_PWM) */
 
 struct pwm_lookup {
 	struct list_head list;
@@ -141,8 +201,11 @@  struct pwm_lookup {
 		.con_id = _con_id,			\
 	}
 
+#if IS_ENABLED(CONFIG_PWM)
 void pwm_add_table(struct pwm_lookup *table, size_t num);
-
-#endif
+#else
+static inline void pwm_add_table(struct pwm_lookup *table, size_t num)
+{}
+#endif /* !IS_ENABLED(CONFIG_PWM) */
 
 #endif /* __LINUX_PWM_H */