| Message ID | 20171004064917.2498-9-joel@jms.id.au |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: aspeed: Device tree updates | expand |
On Wed, 2017-10-04 at 17:19 +1030, Joel Stanley wrote: > Order them all by address. > > Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > arch/arm/boot/dts/aspeed-g4.dtsi | 48 +++++++++++++++--------------- > - > arch/arm/boot/dts/aspeed-g5.dtsi | 61 ++++++++++++++++++++-------- > ------------ > 2 files changed, 54 insertions(+), 55 deletions(-) > > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi > b/arch/arm/boot/dts/aspeed-g4.dtsi > index a549413bda3f..4125e07f22f9 100644 > --- a/arch/arm/boot/dts/aspeed-g4.dtsi > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi > @@ -183,6 +183,27 @@ > clock-names = "PCLK"; > }; > > + uart1: serial@1e783000 { > + compatible = "ns16550a"; > + reg = <0x1e783000 0x1000>; > + reg-shift = <2>; > + interrupts = <9>; > + clocks = <&clk_uart>; > + no-loopback-test; > + status = "disabled"; > + }; > + > + uart5: serial@1e784000 { > + compatible = "ns16550a"; > + reg = <0x1e784000 0x1000>; > + reg-shift = <2>; > + interrupts = <10>; > + clocks = <&clk_uart>; > + current-speed = <38400>; > + no-loopback-test; > + status = "disabled"; > + }; > + > wdt1: wdt@1e785000 { > compatible = "aspeed,ast2400-wdt"; > reg = <0x1e785000 0x1c>; > @@ -197,11 +218,11 @@ > status = "disabled"; > }; > > - uart1: serial@1e783000 { > + uart6: serial@1e787000 { > compatible = "ns16550a"; > - reg = <0x1e783000 0x1000>; > + reg = <0x1e787000 0x1000>; > reg-shift = <2>; > - interrupts = <9>; > + interrupts = <10>; > clocks = <&clk_uart>; > no-loopback-test; > status = "disabled"; > @@ -237,27 +258,6 @@ > status = "disabled"; > }; > > - uart5: serial@1e784000 { > - compatible = "ns16550a"; > - reg = <0x1e784000 0x1000>; > - reg-shift = <2>; > - interrupts = <10>; > - clocks = <&clk_uart>; > - current-speed = <38400>; > - no-loopback-test; > - status = "disabled"; > - }; > - > - uart6: serial@1e787000 { > - compatible = "ns16550a"; > - reg = <0x1e787000 0x1000>; > - reg-shift = <2>; > - interrupts = <10>; > - clocks = <&clk_uart>; > - no-loopback-test; > - status = "disabled"; > - }; > - > i2c: i2c@1e78a000 { > compatible = "simple-bus"; > #address-cells = <1>; > diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi > b/arch/arm/boot/dts/aspeed-g5.dtsi > index de2dafa71651..61cc2d25143a 100644 > --- a/arch/arm/boot/dts/aspeed-g5.dtsi > +++ b/arch/arm/boot/dts/aspeed-g5.dtsi > @@ -227,6 +227,26 @@ > clock-names = "PCLK"; > }; > > + uart1: serial@1e783000 { > + compatible = "ns16550a"; > + reg = <0x1e783000 0x1000>; > + reg-shift = <2>; > + interrupts = <9>; > + clocks = <&clk_uart>; > + no-loopback-test; > + status = "disabled"; > + }; > + > + uart5: serial@1e784000 { > + compatible = "ns16550a"; > + reg = <0x1e784000 0x1000>; > + reg-shift = <2>; > + interrupts = <10>; > + clocks = <&clk_uart>; > + current-speed = <38400>; > + no-loopback-test; > + status = "disabled"; > + }; > > wdt1: wdt@1e785000 { > compatible = "aspeed,ast2500-wdt"; > @@ -247,16 +267,6 @@ > status = "disabled"; > }; > > - uart1: serial@1e783000 { > - compatible = "ns16550a"; > - reg = <0x1e783000 0x1000>; > - reg-shift = <2>; > - interrupts = <9>; > - clocks = <&clk_uart>; > - no-loopback-test; > - status = "disabled"; > - }; > - > lpc: lpc@1e789000 { > compatible = "aspeed,ast2500-lpc", > "simple-mfd"; > reg = <0x1e789000 0x1000>; > @@ -287,6 +297,16 @@ > }; > }; > > + uart6: serial@1e787000 { > + compatible = "ns16550a"; > + reg = <0x1e787000 0x1000>; > + reg-shift = <2>; > + interrupts = <10>; > + clocks = <&clk_uart>; > + no-loopback-test; > + status = "disabled"; > + }; > + > uart2: serial@1e78d000 { > compatible = "ns16550a"; > reg = <0x1e78d000 0x1000>; > @@ -317,27 +337,6 @@ > status = "disabled"; > }; > > - uart5: serial@1e784000 { > - compatible = "ns16550a"; > - reg = <0x1e784000 0x1000>; > - reg-shift = <2>; > - interrupts = <10>; > - clocks = <&clk_uart>; > - current-speed = <38400>; > - no-loopback-test; > - status = "disabled"; > - }; > - > - uart6: serial@1e787000 { > - compatible = "ns16550a"; > - reg = <0x1e787000 0x1000>; > - reg-shift = <2>; > - interrupts = <10>; > - clocks = <&clk_uart>; > - no-loopback-test; > - status = "disabled"; > - }; > - > i2c: i2c@1e78a000 { > compatible = "simple-bus"; > #address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index a549413bda3f..4125e07f22f9 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -183,6 +183,27 @@ clock-names = "PCLK"; }; + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x1000>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + current-speed = <38400>; + no-loopback-test; + status = "disabled"; + }; + wdt1: wdt@1e785000 { compatible = "aspeed,ast2400-wdt"; reg = <0x1e785000 0x1c>; @@ -197,11 +218,11 @@ status = "disabled"; }; - uart1: serial@1e783000 { + uart6: serial@1e787000 { compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; + reg = <0x1e787000 0x1000>; reg-shift = <2>; - interrupts = <9>; + interrupts = <10>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; @@ -237,27 +258,6 @@ status = "disabled"; }; - uart5: serial@1e784000 { - compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - current-speed = <38400>; - no-loopback-test; - status = "disabled"; - }; - - uart6: serial@1e787000 { - compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; - i2c: i2c@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index de2dafa71651..61cc2d25143a 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -227,6 +227,26 @@ clock-names = "PCLK"; }; + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x1000>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + current-speed = <38400>; + no-loopback-test; + status = "disabled"; + }; wdt1: wdt@1e785000 { compatible = "aspeed,ast2500-wdt"; @@ -247,16 +267,6 @@ status = "disabled"; }; - uart1: serial@1e783000 { - compatible = "ns16550a"; - reg = <0x1e783000 0x1000>; - reg-shift = <2>; - interrupts = <9>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; - lpc: lpc@1e789000 { compatible = "aspeed,ast2500-lpc", "simple-mfd"; reg = <0x1e789000 0x1000>; @@ -287,6 +297,16 @@ }; }; + uart6: serial@1e787000 { + compatible = "ns16550a"; + reg = <0x1e787000 0x1000>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&clk_uart>; + no-loopback-test; + status = "disabled"; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x1000>; @@ -317,27 +337,6 @@ status = "disabled"; }; - uart5: serial@1e784000 { - compatible = "ns16550a"; - reg = <0x1e784000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - current-speed = <38400>; - no-loopback-test; - status = "disabled"; - }; - - uart6: serial@1e787000 { - compatible = "ns16550a"; - reg = <0x1e787000 0x1000>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&clk_uart>; - no-loopback-test; - status = "disabled"; - }; - i2c: i2c@1e78a000 { compatible = "simple-bus"; #address-cells = <1>;
Order them all by address. Signed-off-by: Joel Stanley <joel@jms.id.au> --- arch/arm/boot/dts/aspeed-g4.dtsi | 48 +++++++++++++++---------------- arch/arm/boot/dts/aspeed-g5.dtsi | 61 ++++++++++++++++++++-------------------- 2 files changed, 54 insertions(+), 55 deletions(-) -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html