@@ -1,5 +1,4 @@
CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@@ -28,9 +27,7 @@ CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_QCOM=y
CONFIG_SMP=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_PREEMPT=y
-CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_CLEANCACHE=y
CONFIG_ARM_APPENDED_DTB=y
@@ -57,14 +54,12 @@ CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_QCOM_EBI2=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
@@ -103,7 +98,6 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_QUP=y
@@ -123,9 +117,9 @@ CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
+CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_THERMAL=y
CONFIG_QCOM_TSENS=y
CONFIG_MFD_PM8XXX=y
@@ -163,7 +157,6 @@ CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_MSM=y
@@ -173,7 +166,6 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_DMADEVICES=y
@@ -187,15 +179,16 @@ CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_LCC_806X=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_LCC_8960=y
-CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_REMOTEPROC=y
CONFIG_QCOM_ADSP_PIL=y
CONFIG_QCOM_Q6V5_PIL=y
CONFIG_QCOM_WCNSS_PIL=y
+CONFIG_RPMSG_QCOM_SMD=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
@@ -213,7 +206,6 @@ CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_BMP280=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_NVMEM=y
CONFIG_QCOM_QFPROM=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
@@ -234,7 +226,4 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its dependencies to be enabled. The update is generated by "make savedefconfig" and as such reflects changes to the implicit state of other options, as of v4.14-rc1. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm/configs/qcom_defconfig | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) -- 2.12.0