[03/20] ARM: dts: uniphier: update GPIO nodes

Message ID	1507890129-1543-4-git-send-email-yamada.masahiro@socionext.com
State	Accepted
Commit	0f72b74b32dca1895fcf61b63164c9e656228bad
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 81.169.180.215 as permitted sender) client-ip=81.169.180.215; From: Masahiro Yamada <yamada.masahiro@socionext.com> To: u-boot@lists.denx.de Date: Fri, 13 Oct 2017 19:21:52 +0900 Message-Id: <1507890129-1543-4-git-send-email-yamada.masahiro@socionext.com> In-Reply-To: <1507890129-1543-1-git-send-email-yamada.masahiro@socionext.com> References: <1507890129-1543-1-git-send-email-yamada.masahiro@socionext.com> Subject: [U-Boot] [PATCH 03/20] ARM: dts: uniphier: update GPIO nodes Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	ARM: uniphier: various refactoring for v2017.11-rc2 \| expand [00/20] ARM: uniphier: various refactoring for v2017.11-rc2 [01/20] ARM: uniphier: switch to CONFIG_ENV_IS_NOWHERE [02/20] gpio: uniphier: rework single device node model [03/20] ARM: dts: uniphier: update GPIO nodes [04/20] pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3 [05/20] pinctrl: uniphier: simplify input enable and delete pin arrays [06/20] ARM: uniphier: use pr_() instead of printf() where appropriate [07/20] usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h> [08/20] i2c: uniphier: replace debug() with dev_dbg() [09/20] i2c: uniphier-f: replace debug() with dev_dbg() [10/20] clk: uniphier: rework for better clock tree structure [11/20] clk: uniphier: add PXs3 clock data [12/20] clk: uniphier: add peripheral clock data [13/20] reset: uniphier: fix the first argument passed to dev_err() [14/20] i2c: uniphier: use clk for enable and get_rate [15/20] i2c: uniphier-f: use clk for enable and get_rate [16/20] ARM: uniphier: split u-boot, dm-pre-reloc out to uniphier-v7-u-boot.dtsi [17/20] ARM: dts: uniphier: prepare to use clock for serial [18/20] serial: uniphier: use clk for enable and get_rate [19/20] ARM: dts: uniphier: sync DT with Linux 4.14-rc4 [20/20] ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTI

diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index 0f172c3..0cc6fd7 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -154,6 +154,29 @@ clock-frequency = <58820000>; }; + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 43 0 0>, + <&pinctrl 51 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>, + <&pinctrl 184 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2", + "gpio_range3", + "gpio_range4", + "gpio_range5"; + ngpios = <200>; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index a3bcf22..b816038 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -108,116 +108,17 @@ clock-frequency = <36864000>; }; - port0x: gpio@55000008 { + gpio: gpio@55000000 { compatible = "socionext,uniphier-gpio"; - reg = <0x55000008 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port1x: gpio@55000010 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000010 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port2x: gpio@55000018 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000018 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port3x: gpio@55000020 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000020 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port4: gpio@55000028 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000028 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port5x: gpio@55000030 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000030 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port6x: gpio@55000038 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000038 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port7x: gpio@55000040 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000040 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port8x: gpio@55000048 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000048 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port9x: gpio@55000050 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000050 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port10x: gpio@55000058 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000058 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port11x: gpio@55000060 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000060 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port12x: gpio@55000068 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000068 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port13x: gpio@55000070 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000070 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port14x: gpio@55000078 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000078 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port16x: gpio@55000088 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000088 0x8>; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <136>; }; i2c0: i2c@58400000 { diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index b45f23c..5f39972 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -116,207 +116,17 @@ clock-frequency = <73728000>; }; - port0x: gpio@55000008 { + gpio: gpio@55000000 { compatible = "socionext,uniphier-gpio"; - reg = <0x55000008 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port1x: gpio@55000010 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000010 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port2x: gpio@55000018 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000018 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port3x: gpio@55000020 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000020 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port4: gpio@55000028 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000028 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port5x: gpio@55000030 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000030 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port6x: gpio@55000038 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000038 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port7x: gpio@55000040 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000040 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port8x: gpio@55000048 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000048 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port9x: gpio@55000050 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000050 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port10x: gpio@55000058 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000058 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port11x: gpio@55000060 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000060 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port12x: gpio@55000068 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000068 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port13x: gpio@55000070 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000070 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port14x: gpio@55000078 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000078 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port17x: gpio@550000a0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port18x: gpio@550000a8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port19x: gpio@550000b0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port20x: gpio@550000b8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port21x: gpio@550000c0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port22x: gpio@550000c8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port23x: gpio@550000d0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port24x: gpio@550000d8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port25x: gpio@550000e0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port26x: gpio@550000e8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port27x: gpio@550000f0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port28x: gpio@550000f8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port29x: gpio@55000100 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000100 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port30x: gpio@55000108 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000108 0x8>; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; }; i2c0: i2c@58780000 { diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index 94eb656..950b02c 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -203,207 +203,17 @@ clock-frequency = <73728000>; }; - port0x: gpio@55000008 { + gpio: gpio@55000000 { compatible = "socionext,uniphier-gpio"; - reg = <0x55000008 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port1x: gpio@55000010 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000010 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port2x: gpio@55000018 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000018 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port3x: gpio@55000020 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000020 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port4: gpio@55000028 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000028 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port5x: gpio@55000030 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000030 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port6x: gpio@55000038 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000038 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port7x: gpio@55000040 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000040 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port8x: gpio@55000048 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000048 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port9x: gpio@55000050 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000050 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port10x: gpio@55000058 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000058 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port11x: gpio@55000060 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000060 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port12x: gpio@55000068 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000068 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port13x: gpio@55000070 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000070 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port14x: gpio@55000078 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000078 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port17x: gpio@550000a0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port18x: gpio@550000a8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port19x: gpio@550000b0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port20x: gpio@550000b8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port21x: gpio@550000c0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port22x: gpio@550000c8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port23x: gpio@550000d0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port24x: gpio@550000d8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port25x: gpio@550000e0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port26x: gpio@550000e8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port27x: gpio@550000f0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port28x: gpio@550000f8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port29x: gpio@55000100 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000100 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port30x: gpio@55000108 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000108 0x8>; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; }; i2c0: i2c@58780000 { diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index c304d90..ac84d15 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -178,200 +178,19 @@ clock-frequency = <88900000>; }; - port0x: gpio@55000008 { + gpio: gpio@55000000 { compatible = "socionext,uniphier-gpio"; - reg = <0x55000008 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port1x: gpio@55000010 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000010 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port2x: gpio@55000018 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000018 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port3x: gpio@55000020 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000020 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port4: gpio@55000028 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000028 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port5x: gpio@55000030 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000030 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port6x: gpio@55000038 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000038 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port7x: gpio@55000040 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000040 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port8x: gpio@55000048 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000048 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port9x: gpio@55000050 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000050 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port10x: gpio@55000058 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000058 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port12x: gpio@55000068 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000068 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port13x: gpio@55000070 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000070 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port14x: gpio@55000078 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000078 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port15x: gpio@55000080 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000080 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port16x: gpio@55000088 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000088 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port17x: gpio@550000a0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port18x: gpio@550000a8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000a8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port19x: gpio@550000b0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port20x: gpio@550000b8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000b8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port21x: gpio@550000c0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port22x: gpio@550000c8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000c8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port23x: gpio@550000d0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port24x: gpio@550000d8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000d8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port25x: gpio@550000e0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port26x: gpio@550000e8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000e8 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port27x: gpio@550000f0 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f0 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port28x: gpio@550000f8 { - compatible = "socionext,uniphier-gpio"; - reg = <0x550000f8 0x8>; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1"; + ngpios = <232>; }; i2c0: i2c@58780000 { diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index 8944005..a004bd1 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -183,7 +183,7 @@ }; gpio: gpio@55000000 { - compatible = "socionext,uniphier-pxs3-gpio"; + compatible = "socionext,uniphier-gpio"; reg = <0x55000000 0x200>; interrupt-parent = <&aidet>; interrupt-controller; @@ -196,6 +196,7 @@ gpio-ranges-group-names = "gpio_range0", "gpio_range1", "gpio_range2"; + ngpios = <286>; }; i2c0: i2c@58780000 { diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index a3de26b..70a5ea4 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -108,116 +108,21 @@ clock-frequency = <80000000>; }; - port0x: gpio@55000008 { + gpio: gpio@55000000 { compatible = "socionext,uniphier-gpio"; - reg = <0x55000008 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port1x: gpio@55000010 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000010 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port2x: gpio@55000018 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000018 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port3x: gpio@55000020 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000020 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port4: gpio@55000028 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000028 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port5x: gpio@55000030 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000030 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port6x: gpio@55000038 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000038 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port7x: gpio@55000040 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000040 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port8x: gpio@55000048 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000048 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port9x: gpio@55000050 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000050 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port10x: gpio@55000058 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000058 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port11x: gpio@55000060 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000060 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port12x: gpio@55000068 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000068 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port13x: gpio@55000070 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000070 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port14x: gpio@55000078 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000078 0x8>; - gpio-controller; - #gpio-cells = <2>; - }; - - port16x: gpio@55000088 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000088 0x8>; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 104 0 0>, + <&pinctrl 112 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + ngpios = <136>; }; i2c0: i2c@58400000 {

[03/20] ARM: dts: uniphier: update GPIO nodes

Commit Message

Patch