diff mbox

[2/2] mmc: core: Power cycle card on voltage switch fail

Message ID 1348166542-3247-1-git-send-email-johan.rudholm@stericsson.com
State New
Headers show

Commit Message

Johan Rudholm Sept. 20, 2012, 6:42 p.m. UTC 
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
---
 drivers/mmc/core/core.c |    2 +-
 drivers/mmc/core/core.h |    1 +
 drivers/mmc/core/sd.c   |    8 ++++++--
 3 files changed, 8 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 3779431..671986a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1346,7 +1346,7 @@  static void mmc_poweroff_notify(struct mmc_host *host)
  * If a host does all the power sequencing itself, ignore the
  * initial MMC_POWER_UP stage.
  */
-static void mmc_power_up(struct mmc_host *host)
+void mmc_power_up(struct mmc_host *host)
 {
 	int bit;
 
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 3bdafbc..5a5170d 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -45,6 +45,7 @@  int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
 void mmc_power_off(struct mmc_host *host);
+void mmc_power_up(struct mmc_host *host);
 
 static inline void mmc_delay(unsigned int ms)
 {
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 74972c2..9a165451 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -720,6 +720,7 @@  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 * state.  We wait 1ms to give cards time to
 	 * respond.
 	 */
+try_again:
 	mmc_go_idle(host);
 
 	/*
@@ -748,7 +749,6 @@  int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	if (max_current > 150)
 		ocr |= SD_OCR_XPC;
 
-try_again:
 	err = mmc_send_app_op_cond(host, ocr, rocr);
 	if (err)
 		return err;
@@ -761,7 +761,11 @@  try_again:
 	   ((*rocr & 0x41000000) == 0x41000000)) {
 		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true);
 		if (err) {
-			ocr &= ~SD_OCR_S18R;
+			/* Power cycle card */
+			pr_warning("%s: Signal voltage switch failed, "
+				"power cycling card\n", mmc_hostname(host));
+			mmc_power_off(host);
+			mmc_power_up(host);
 			goto try_again;
 		}
 	}