diff mbox series

[v2,3/3] usb: phy: remove phy-qcom-8x16-usb.c

Message ID 20171026134827.615-4-elder@linaro.org
State Accepted
Commit 4756f35fdf1403f7f7afaed67a16b6c4a702b903
Headers show
Series usb: remove some unused code | expand

Commit Message

Alex Elder Oct. 26, 2017, 1:48 p.m. UTC
No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver
support any more, so remove the code.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Acked-by: Andy Gross <andy.gross@linaro.org>

---
v2: Update the Kconfig file so it no longer offers to build this code,
    as suggested by Felipe Balbi.

 drivers/usb/phy/Kconfig             |  14 --
 drivers/usb/phy/Makefile            |   1 -
 drivers/usb/phy/phy-qcom-8x16-usb.c | 366 ------------------------------------
 3 files changed, 381 deletions(-)
 delete mode 100644 drivers/usb/phy/phy-qcom-8x16-usb.c

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index f5775e5c9f52..0f8ab981d572 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -137,20 +137,6 @@  config USB_ISP1301
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-isp1301.
 
-config USB_QCOM_8X16_PHY
-	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
-	depends on ARCH_QCOM || COMPILE_TEST
-	depends on RESET_CONTROLLER
-	select USB_PHY
-	select USB_ULPI_VIEWPORT
-	help
-	  Enable this to support the USB transceiver on Qualcomm 8x16 chipsets.
-	  It handles PHY initialization, clock management, power management,
-	  and workarounds required after resetting the hardware.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phy-qcom-8x16-usb.
-
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 61013f38abbe..8beefb7f2777 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,7 +18,6 @@  obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
-obj-$(CONFIG_USB_QCOM_8X16_PHY)	+= phy-qcom-8x16-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
deleted file mode 100644
index 679afeaaa9a8..000000000000
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ /dev/null
@@ -1,366 +0,0 @@ 
-/*
- * Copyright (c) 2015, Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/extcon.h>
-#include <linux/gpio/consumer.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reset.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/usb/ulpi.h>
-
-#define HSPHY_AHBBURST			0x0090
-#define HSPHY_AHBMODE			0x0098
-#define HSPHY_GENCONFIG			0x009c
-#define HSPHY_GENCONFIG_2		0x00a0
-
-#define HSPHY_USBCMD			0x0140
-#define HSPHY_ULPI_VIEWPORT		0x0170
-#define HSPHY_CTRL			0x0240
-
-#define HSPHY_TXFIFO_IDLE_FORCE_DIS	BIT(4)
-#define HSPHY_SESS_VLD_CTRL_EN		BIT(7)
-#define HSPHY_POR_ASSERT		BIT(0)
-#define HSPHY_RETEN			BIT(1)
-
-#define HSPHY_SESS_VLD_CTRL		BIT(25)
-
-#define ULPI_PWR_CLK_MNG_REG		0x88
-#define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)
-
-#define ULPI_MISC_A			0x96
-#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
-#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)
-
-#define HSPHY_3P3_MIN			3050000 /* uV */
-#define HSPHY_3P3_MAX			3300000 /* uV */
-
-#define HSPHY_1P8_MIN			1800000 /* uV */
-#define HSPHY_1P8_MAX			1800000 /* uV */
-
-#define HSPHY_VDD_MIN			5
-#define HSPHY_VDD_MAX			7
-
-struct phy_8x16 {
-	struct usb_phy			phy;
-	void __iomem			*regs;
-	struct clk			*core_clk;
-	struct clk			*iface_clk;
-	struct regulator_bulk_data	regulator[3];
-
-	struct reset_control		*phy_reset;
-
-	struct gpio_desc		*switch_gpio;
-	struct notifier_block		reboot_notify;
-};
-
-static int phy_8x16_notify_connect(struct usb_phy *phy,
-				   enum usb_device_speed speed)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val;
-
-	val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
-	usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A));
-
-	val = readl(qphy->regs + HSPHY_USBCMD);
-	val |= HSPHY_SESS_VLD_CTRL;
-	writel(val, qphy->regs + HSPHY_USBCMD);
-
-	return 0;
-}
-
-static int phy_8x16_notify_disconnect(struct usb_phy *phy,
-				      enum usb_device_speed speed)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val;
-
-	val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
-	usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A));
-
-	val = readl(qphy->regs + HSPHY_USBCMD);
-	val &= ~HSPHY_SESS_VLD_CTRL;
-	writel(val, qphy->regs + HSPHY_USBCMD);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_on(struct phy_8x16 *qphy)
-{
-	phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN);
-
-	/* Switch D+/D- lines to Device connector */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_off(struct phy_8x16 *qphy)
-{
-	phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN);
-
-	/* Switch D+/D- lines to USB HUB */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 1);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
-	struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy);
-
-	if (event)
-		phy_8x16_vbus_on(qphy);
-	else
-		phy_8x16_vbus_off(qphy);
-
-	return NOTIFY_DONE;
-}
-
-static int phy_8x16_init(struct usb_phy *phy)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val, init[] = {0x44, 0x6B, 0x24, 0x13};
-	u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
-	int idx, state;
-
-	for (idx = 0; idx < ARRAY_SIZE(init); idx++)
-		usb_phy_io_write(phy, init[idx], addr + idx);
-
-	reset_control_reset(qphy->phy_reset);
-
-	/* Assert USB HSPHY_POR */
-	val = readl(qphy->regs + HSPHY_CTRL);
-	val |= HSPHY_POR_ASSERT;
-	writel(val, qphy->regs + HSPHY_CTRL);
-
-	/*
-	 * wait for minimum 10 microseconds as suggested in HPG.
-	 * Use a slightly larger value since the exact value didn't
-	 * work 100% of the time.
-	 */
-	usleep_range(12, 15);
-
-	/* Deassert USB HSPHY_POR */
-	val = readl(qphy->regs + HSPHY_CTRL);
-	val &= ~HSPHY_POR_ASSERT;
-	writel(val, qphy->regs + HSPHY_CTRL);
-
-	usleep_range(10, 15);
-
-	writel(0x00, qphy->regs + HSPHY_AHBBURST);
-	writel(0x08, qphy->regs + HSPHY_AHBMODE);
-
-	/* workaround for rx buffer collision issue */
-	val = readl(qphy->regs + HSPHY_GENCONFIG);
-	val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS;
-	writel(val, qphy->regs + HSPHY_GENCONFIG);
-
-	val = readl(qphy->regs + HSPHY_GENCONFIG_2);
-	val |= HSPHY_SESS_VLD_CTRL_EN;
-	writel(val, qphy->regs + HSPHY_GENCONFIG_2);
-
-	val = ULPI_PWR_OTG_COMP_DISABLE;
-	usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
-
-	state = extcon_get_state(qphy->phy.edev, EXTCON_USB);
-	if (state)
-		phy_8x16_vbus_on(qphy);
-	else
-		phy_8x16_vbus_off(qphy);
-
-	val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-	usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL);
-
-	return 0;
-}
-
-static void phy_8x16_shutdown(struct usb_phy *phy)
-{
-	u32 val;
-
-	/* Put the controller in non-driving mode */
-	val = usb_phy_io_read(phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	usb_phy_io_write(phy, val, ULPI_FUNC_CTRL);
-}
-
-static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
-{
-	struct device *dev = qphy->phy.dev;
-	int ret;
-
-	qphy->core_clk = devm_clk_get(dev, "core");
-	if (IS_ERR(qphy->core_clk))
-		return PTR_ERR(qphy->core_clk);
-
-	qphy->iface_clk = devm_clk_get(dev, "iface");
-	if (IS_ERR(qphy->iface_clk))
-		return PTR_ERR(qphy->iface_clk);
-
-	qphy->regulator[0].supply = "v3p3";
-	qphy->regulator[1].supply = "v1p8";
-	qphy->regulator[2].supply = "vddcx";
-
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator),
-				      qphy->regulator);
-	if (ret)
-		return ret;
-
-	qphy->phy_reset = devm_reset_control_get(dev, "phy");
-	if (IS_ERR(qphy->phy_reset))
-		return PTR_ERR(qphy->phy_reset);
-
-	qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch",
-						   GPIOD_OUT_LOW);
-	return PTR_ERR_OR_ZERO(qphy->switch_gpio);
-}
-
-static int phy_8x16_reboot_notify(struct notifier_block *this,
-				  unsigned long code, void *unused)
-{
-	struct phy_8x16 *qphy;
-
-	qphy = container_of(this, struct phy_8x16, reboot_notify);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot_notify
-	 */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-	return NOTIFY_DONE;
-}
-
-static int phy_8x16_probe(struct platform_device *pdev)
-{
-	struct phy_8x16 *qphy;
-	struct resource *res;
-	struct usb_phy *phy;
-	int ret;
-
-	qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL);
-	if (!qphy)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, qphy);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qphy->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(qphy->regs))
-		return PTR_ERR(qphy->regs);
-
-	phy			= &qphy->phy;
-	phy->dev		= &pdev->dev;
-	phy->label		= dev_name(&pdev->dev);
-	phy->init		= phy_8x16_init;
-	phy->shutdown		= phy_8x16_shutdown;
-	phy->notify_connect	= phy_8x16_notify_connect;
-	phy->notify_disconnect	= phy_8x16_notify_disconnect;
-	phy->io_priv		= qphy->regs + HSPHY_ULPI_VIEWPORT;
-	phy->io_ops		= &ulpi_viewport_access_ops;
-	phy->type		= USB_PHY_TYPE_USB2;
-	phy->vbus_nb.notifier_call = phy_8x16_vbus_notify;
-	phy->id_nb.notifier_call = NULL;
-
-	ret = phy_8x16_read_devicetree(qphy);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_set_rate(qphy->core_clk, INT_MAX);
-	if (ret < 0)
-		dev_dbg(phy->dev, "Can't boost core clock\n");
-
-	ret = clk_prepare_enable(qphy->core_clk);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare_enable(qphy->iface_clk);
-	if (ret < 0)
-		goto off_core;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator),
-				    qphy->regulator);
-	if (WARN_ON(ret))
-		goto off_clks;
-
-	ret = usb_add_phy_dev(&qphy->phy);
-	if (ret)
-		goto off_power;
-
-	qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
-	register_reboot_notifier(&qphy->reboot_notify);
-
-	return 0;
-
-off_power:
-	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
-off_clks:
-	clk_disable_unprepare(qphy->iface_clk);
-off_core:
-	clk_disable_unprepare(qphy->core_clk);
-	return ret;
-}
-
-static int phy_8x16_remove(struct platform_device *pdev)
-{
-	struct phy_8x16 *qphy = platform_get_drvdata(pdev);
-
-	unregister_reboot_notifier(&qphy->reboot_notify);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot_notify
-	 */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-
-	usb_remove_phy(&qphy->phy);
-
-	clk_disable_unprepare(qphy->iface_clk);
-	clk_disable_unprepare(qphy->core_clk);
-	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
-	return 0;
-}
-
-static const struct of_device_id phy_8x16_dt_match[] = {
-	{ .compatible = "qcom,usb-8x16-phy" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, phy_8x16_dt_match);
-
-static struct platform_driver phy_8x16_driver = {
-	.probe	= phy_8x16_probe,
-	.remove = phy_8x16_remove,
-	.driver = {
-		.name = "phy-qcom-8x16-usb",
-		.of_match_table = phy_8x16_dt_match,
-	},
-};
-module_platform_driver(phy_8x16_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver");