[4.9.y,2/3] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID

Message ID 20171103031131.14024-1-nhan.nguyen.yb@renesas.com
State New
Headers show
  • [4.9.y,1/3] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
Related show

Commit Message

Nhan Ngoc. Nguyen Nov. 3, 2017, 3:11 a.m.
From: John Stultz <john.stultz@linaro.org>

commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream.

Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating

This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: John Stultz <john.stultz@linaro.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>

Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>

Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>

Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)



diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 545ceff..17b9e98 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -573,24 +573,13 @@  static int adv7511_get_modes(struct adv7511 *adv7511,
 	unsigned int count;
 	/* Reading the EDID only works if the device is powered */
-	if (!adv7511->powered) {
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN, 0);
-		if (adv7511->i2c_main->irq) {
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-				     ADV7511_INT0_EDID_READY);
-			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
-				     ADV7511_INT1_DDC_ERROR);
-		}
-		adv7511->current_edid_segment = -1;
-	}
+	if (!adv7511->powered)
+		__adv7511_power_on(adv7511);
 	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
 	if (!adv7511->powered)
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN);
+		__adv7511_power_off(adv7511);
 	adv7511->edid = edid;