@@ -13,6 +13,7 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <linux/clk.h>
#include "sdhci-pltfm.h"
@@ -45,8 +46,9 @@
struct f_sdhost_priv {
struct clk *clk_iface;
struct clk *clk;
- u32 vendor_hs200;
struct device *dev;
+ u32 vendor_hs200;
+ bool enable_cmd_dat_delay;
};
static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
@@ -84,10 +86,19 @@ static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host)
static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask)
{
+ struct f_sdhost_priv *priv = sdhci_priv(host);
+ u32 ctl;
+
if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0)
sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL);
sdhci_reset(host, mask);
+
+ if (priv->enable_cmd_dat_delay) {
+ ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+ ctl |= F_SDH30_CMD_DAT_DELAY;
+ sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
+ }
}
static const struct sdhci_ops sdhci_f_sdh30_ops = {
@@ -126,6 +137,11 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
SDHCI_QUIRK2_TUNING_WORK_AROUND;
+ if (device_property_read_bool(dev, "fujitsu,cmd-dat-delay-select")) {
+ dev_info(dev, "Setting cmd-dat-delay\n");
+ priv->enable_cmd_dat_delay = true;
+ }
+
ret = mmc_of_parse(host->mmc);
if (ret)
goto err;
The Socionext SynQuacer SoC inherits this IP from Fujitsu, but requires the F_SDH30_CMD_DAT_DELAY bit to be set in the F_SDH30_ESD_CONTROL control register. So set this bit if the DT node has the 'fujitsu,cmd-dat-delay-select' property. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- drivers/mmc/host/sdhci_f_sdh30.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html