diff mbox series

[2/6] arm: dts: imx: Add missing #phy-cells to usb-nop-xceiv

Message ID 20171109222614.5719-2-robh@kernel.org
State Accepted
Commit 915fbe59cbf2fe610cf85ac545780bd72cba13e5
Headers show
Series [1/6] dt-bindings: usb: add #phy-cells to usb-nop-xceiv | expand

Commit Message

Rob Herring Nov. 9, 2017, 10:26 p.m. UTC
"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in i.MX dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
Please apply to i.MX tree.

 arch/arm/boot/dts/imx25.dtsi                           | 2 ++
 arch/arm/boot/dts/imx27-pdk.dts                        | 1 +
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts         | 1 +
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi        | 1 +
 arch/arm/boot/dts/imx35.dtsi                           | 2 ++
 arch/arm/boot/dts/imx51-babbage.dts                    | 1 +
 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 1 +
 arch/arm/boot/dts/imx51.dtsi                           | 1 +
 arch/arm/boot/dts/imx53.dtsi                           | 2 ++
 arch/arm/boot/dts/imx7d.dtsi                           | 1 +
 arch/arm/boot/dts/imx7s.dtsi                           | 2 ++
 11 files changed, 15 insertions(+)

-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Shawn Guo Nov. 16, 2017, 11:10 a.m. UTC | #1
On Thu, Nov 09, 2017 at 04:26:10PM -0600, Rob Herring wrote:
> "usb-nop-xceiv" is using the phy binding, but is missing #phy-cells

> property. This is probably because the binding was the precursor to the phy

> binding.

> 

> Fixes the following warning in i.MX dts files:

> 

> Warning (phys_property): Missing property '#phy-cells' in node ...

> 

> Signed-off-by: Rob Herring <robh@kernel.org>

> Cc: Shawn Guo <shawnguo@kernel.org>

> Cc: Sascha Hauer <kernel@pengutronix.de>

> Cc: Fabio Estevam <fabio.estevam@nxp.com>


Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 09ce8b81fafa..c43cf704b768 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -628,11 +628,13 @@ 
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 96f442ba6d22..2a140c8ae6d2 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -30,6 +30,7 @@ 
 			reg = <0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 2a9198f99a8d..2ed2d73b087e 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -63,6 +63,7 @@ 
 			vcc-supply = <&reg_5v0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index c973c5d91875..c9095b7654c6 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -53,6 +53,7 @@ 
 			vcc-supply = <&sw3_reg>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 6d5e6a60bee7..f049c692c6b0 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -402,11 +402,13 @@ 
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 873cf242679c..699ee77c284e 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -165,6 +165,7 @@ 
 			clocks = <&clks IMX5_CLK_DUMMY>;
 			clock-names = "main_clk";
 			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 1305b05c7ed9..b3d952f37cdc 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -94,6 +94,7 @@ 
 			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 			clock-names = "main_clk";
 			clock-frequency = <19200000>;
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1ee1d542d9ad..c27ab6d88263 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -113,6 +113,7 @@ 
 			reg = <0>;
 			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8bf0d89cdd35..423309df103f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -303,6 +303,7 @@ 
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 				status = "okay";
 			};
 
@@ -310,6 +311,7 @@ 
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f46814a7ea44..7bcdc953dc9e 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -109,6 +109,7 @@ 
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_PHY2_CLK>;
 		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 
 	fec2: ethernet@30bf0000 {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 82ad26e766eb..ded1504bf602 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -949,12 +949,14 @@ 
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX7D_USB_PHY1_CLK>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 			};
 
 			usbphynop3: usbphynop3 {
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 			};
 
 			usdhc1: usdhc@30b40000 {