diff mbox series

[1/3] kni: support for MAC addr change

Message ID 1512042367-6361-1-git-send-email-hemant.agrawal@nxp.com
State Superseded
Headers show
Series [1/3] kni: support for MAC addr change | expand

Commit Message

Hemant Agrawal Nov. 30, 2017, 11:46 a.m. UTC
This patch adds following:
1. Option to configure the mac address during create. Generate random
   address only if the user has not provided any valid address.
2. Inform usespace, if mac address is being changed in linux.
3. Implement default handling of mac address change in the corresponding
   ethernet device.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

---
 doc/guides/sample_app_ug/kernel_nic_interface.rst  | 41 +++++++++++++++++++++-
 examples/kni/main.c                                | 36 +++++++++++++++++++
 .../linuxapp/eal/include/exec-env/rte_kni_common.h |  3 ++
 lib/librte_eal/linuxapp/kni/kni_misc.c             | 17 +++++----
 lib/librte_eal/linuxapp/kni/kni_net.c              | 14 +++++++-
 lib/librte_kni/rte_kni.c                           | 40 +++++++++++++++++++--
 lib/librte_kni/rte_kni.h                           |  5 +++
 test/test/test_kni.c                               |  2 ++
 8 files changed, 147 insertions(+), 11 deletions(-)

-- 
2.7.4

Comments

Ferruh Yigit Dec. 22, 2017, 9:55 p.m. UTC | #1
On 11/30/2017 3:46 AM, Hemant Agrawal wrote:
> This patch adds following:

> 1. Option to configure the mac address during create. Generate random

>    address only if the user has not provided any valid address.

> 2. Inform usespace, if mac address is being changed in linux.

> 3. Implement default handling of mac address change in the corresponding

>    ethernet device.>

> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>


Overall lgtm, there are a few issues commented below.

Thanks,
ferruh

<...>

> @@ -269,11 +275,15 @@ The code for allocating the kernel NIC interfaces for a specific port is as foll

>                      conf.addr = dev_info.pci_dev->addr;

>                      conf.id = dev_info.pci_dev->id;

>  

> +                    /* Get the interface default mac address */

> +                    rte_eth_macaddr_get(port_id, struct ether_addr *)&conf.mac_addr);


a parentheses is missing, good to fix although this is document :)

<...>

> @@ -587,3 +603,26 @@ Currently, setting a new MTU and configuring the network interface (up/ down) ar

>              RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);

>          return ret;

>      }

> +

> +    /* Callback for request of configuring device mac address */

> +

> +    static int

> +    kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])

> +    {

> +        int ret = 0;

> +

> +        if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {

> +                RTE_LOG(ERR, KNI, "Invalid port id %d\n", port_id);

> +                return -EINVAL;

> +        }

> +

> +        RTE_LOG(INFO, KNI, "Configure mac address of %d", port_id);

> +        /* Configure network interface mac address */

> +        ret = rte_eth_dev_default_mac_addr_set(port_id,

> +                                               (struct ether_addr *)mac_addr);

> +        if (ret < 0)

> +                RTE_LOG(ERR, KNI, "Failed to config mac_addr for port %d\n",

> +                        port_id);

> +

> +        return ret;

> +    }



It is hard to maintain code in doc, I am aware other related code is already in
document but what do you think keeping this minimal, like:

    static int
    kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
    {
       ....
    }


<...>

> @@ -559,6 +583,14 @@ rte_kni_handle_request(struct rte_kni *kni)

>  			req->result = kni->ops.config_network_if(\

>  					kni->ops.port_id, req->if_up);

>  		break;

> +	case RTE_KNI_REQ_CHANGE_MAC_ADDR: /* Change MAC Address */

> +		if (kni->ops.config_mac_address)

> +			req->result = kni->ops.config_mac_address(

> +					kni->ops.port_id, req->mac_addr);

> +		else

> +			req->result = kni_config_mac_address(

> +					kni->ops.port_id, req->mac_addr);


ops.port_id can be unset if there is no physically backing device the kni
interface. And I guess for that case port_id will be 0 and it will corrupt other
interface's data. There needs to find a way to handle the port_id not set case.

Since kni sample always creates a KNI interface backed by pyhsical device, this
is not an issue for kni sample app but please think about kni pmd case.

<...>

> @@ -87,6 +91,7 @@ struct rte_kni_conf {

>  	unsigned mbuf_size; /* mbuf size */

>  	struct rte_pci_addr addr;

>  	struct rte_pci_id id;

> +	char mac_addr[ETHER_ADDR_LEN]; /* MAC address assigned to KNI */

>  

>  	__extension__

>  	uint8_t force_bind : 1; /* Flag to bind kernel thread */


"struct rte_kni_conf" is a public struct. Adding a variable into the middle of
the struct will break the ABI.
But I think it is OK to add to the end, unless struct is not used as array.

<...>
Hemant Agrawal Dec. 26, 2017, 10:08 a.m. UTC | #2
Hi Ferruh,

On 12/23/2017 3:25 AM, Ferruh Yigit wrote:
> On 11/30/2017 3:46 AM, Hemant Agrawal wrote:

>> This patch adds following:

>> 1. Option to configure the mac address during create. Generate random

>>    address only if the user has not provided any valid address.

>> 2. Inform usespace, if mac address is being changed in linux.

>> 3. Implement default handling of mac address change in the corresponding

>>    ethernet device.>

>> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>

>

> Overall lgtm, there are a few issues commented below.

>

> Thanks,

> ferruh

>

> <...>



>> @@ -587,3 +603,26 @@ Currently, setting a new MTU and configuring the network interface (up/ down) ar

>>              RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);

>>          return ret;

>>      }

>> +

>> +    /* Callback for request of configuring device mac address */

>> +

>> +    static int

>> +    kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])

>> +    {

>> +        int ret = 0;

>> +

>> +        if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {

>> +                RTE_LOG(ERR, KNI, "Invalid port id %d\n", port_id);

>> +                return -EINVAL;

>> +        }

>> +

>> +        RTE_LOG(INFO, KNI, "Configure mac address of %d", port_id);

>> +        /* Configure network interface mac address */

>> +        ret = rte_eth_dev_default_mac_addr_set(port_id,

>> +                                               (struct ether_addr *)mac_addr);

>> +        if (ret < 0)

>> +                RTE_LOG(ERR, KNI, "Failed to config mac_addr for port %d\n",

>> +                        port_id);

>> +

>> +        return ret;

>> +    }

>

>

> It is hard to maintain code in doc, I am aware other related code is already in

> document but what do you think keeping this minimal, like:

>

>     static int

>     kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])

>     {

>        ....

>     }


agree.

>

>

> <...>

>

>> @@ -559,6 +583,14 @@ rte_kni_handle_request(struct rte_kni *kni)

>>  			req->result = kni->ops.config_network_if(\

>>  					kni->ops.port_id, req->if_up);

>>  		break;

>> +	case RTE_KNI_REQ_CHANGE_MAC_ADDR: /* Change MAC Address */

>> +		if (kni->ops.config_mac_address)

>> +			req->result = kni->ops.config_mac_address(

>> +					kni->ops.port_id, req->mac_addr);

>> +		else

>> +			req->result = kni_config_mac_address(

>> +					kni->ops.port_id, req->mac_addr);

>

> ops.port_id can be unset if there is no physically backing device the kni

> interface. And I guess for that case port_id will be 0 and it will corrupt other

> interface's data. There needs to find a way to handle the port_id not set case.


got it. I will set it as UINT16_MAX and check for it.

>

> Since kni sample always creates a KNI interface backed by pyhsical device, this

> is not an issue for kni sample app but please think about kni pmd case.

>




> <...>

>

>> @@ -87,6 +91,7 @@ struct rte_kni_conf {

>>  	unsigned mbuf_size; /* mbuf size */

>>  	struct rte_pci_addr addr;

>>  	struct rte_pci_id id;

>> +	char mac_addr[ETHER_ADDR_LEN]; /* MAC address assigned to KNI */

>>

>>  	__extension__

>>  	uint8_t force_bind : 1; /* Flag to bind kernel thread */

>

> "struct rte_kni_conf" is a public struct. Adding a variable into the middle of

> the struct will break the ABI.

> But I think it is OK to add to the end, unless struct is not used as array.

>

> <...>

>

yes. adding it into middle breaks the ABIs. However adding into end is ok.
diff mbox series

Patch

diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst
index e1ac415..d9d8e4a 100644
--- a/doc/guides/sample_app_ug/kernel_nic_interface.rst
+++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst
@@ -209,6 +209,12 @@  Dumping the network traffic:
 
     #tcpdump -i vEth0_0
 
+Change the MAC address:
+
+.. code-block:: console
+
+    #ifconfig vEth0_0 hw ether 0C:01:02:03:04:08
+
 When the DPDK userspace application is closed, all the KNI devices are deleted from Linux*.
 
 Explanation
@@ -269,11 +275,15 @@  The code for allocating the kernel NIC interfaces for a specific port is as foll
                     conf.addr = dev_info.pci_dev->addr;
                     conf.id = dev_info.pci_dev->id;
 
+                    /* Get the interface default mac address */
+                    rte_eth_macaddr_get(port_id, struct ether_addr *)&conf.mac_addr);
+
                     memset(&ops, 0, sizeof(ops));
 
                     ops.port_id = port_id;
                     ops.change_mtu = kni_change_mtu;
                     ops.config_network_if = kni_config_network_interface;
+                    ops.config_mac_address = kni_config_mac_address;
 
                     kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
                 } else
@@ -502,13 +512,19 @@  Callbacks for Kernel Requests
 
 To execute specific PMD operations in user space requested by some Linux* commands,
 callbacks must be implemented and filled in the struct rte_kni_ops structure.
-Currently, setting a new MTU and configuring the network interface (up/ down) are supported.
+Currently, setting a new MTU, change in mac address and configuring the network interface(up/ down)
+are supported.
+Default implementation for following is available in rte_kni library. Application
+may choose to not implement follwoing callbacks:
+	``config_mac_address``
+
 
 .. code-block:: c
 
     static struct rte_kni_ops kni_ops = {
         .change_mtu = kni_change_mtu,
         .config_network_if = kni_config_network_interface,
+        .config_mac_address = kni_config_mac_address,
     };
 
     /* Callback for request of changing MTU */
@@ -587,3 +603,26 @@  Currently, setting a new MTU and configuring the network interface (up/ down) ar
             RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);
         return ret;
     }
+
+    /* Callback for request of configuring device mac address */
+
+    static int
+    kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
+    {
+        int ret = 0;
+
+        if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {
+                RTE_LOG(ERR, KNI, "Invalid port id %d\n", port_id);
+                return -EINVAL;
+        }
+
+        RTE_LOG(INFO, KNI, "Configure mac address of %d", port_id);
+        /* Configure network interface mac address */
+        ret = rte_eth_dev_default_mac_addr_set(port_id,
+                                               (struct ether_addr *)mac_addr);
+        if (ret < 0)
+                RTE_LOG(ERR, KNI, "Failed to config mac_addr for port %d\n",
+                        port_id);
+
+        return ret;
+    }
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 3f17385..1c251c2 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -163,6 +163,7 @@  static struct kni_interface_stats kni_stats[RTE_MAX_ETHPORTS];
 
 static int kni_change_mtu(uint16_t port_id, unsigned int new_mtu);
 static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
+static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);
 
 static rte_atomic32_t kni_stop = RTE_ATOMIC32_INIT(0);
 
@@ -766,6 +767,37 @@  kni_config_network_interface(uint16_t port_id, uint8_t if_up)
 	return ret;
 }
 
+static void
+print_ethaddr(const char *name, struct ether_addr *mac_addr)
+{
+	char buf[ETHER_ADDR_FMT_SIZE];
+	ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, mac_addr);
+	RTE_LOG(INFO, APP, "\t%s%s\n", name, buf);
+}
+
+/* Callback for request of configuring mac address */
+static int
+kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
+{
+	int ret = 0;
+
+	if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {
+		RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
+		return -EINVAL;
+	}
+
+	RTE_LOG(INFO, APP, "Configure mac address of %d\n", port_id);
+	print_ethaddr("Address:", (struct ether_addr *)mac_addr);
+
+	ret = rte_eth_dev_default_mac_addr_set(port_id,
+					       (struct ether_addr *)mac_addr);
+	if (ret < 0)
+		RTE_LOG(ERR, APP, "Failed to config mac_addr for port %d\n",
+			port_id);
+
+	return ret;
+}
+
 static int
 kni_alloc(uint16_t port_id)
 {
@@ -809,11 +841,15 @@  kni_alloc(uint16_t port_id)
 				conf.addr = dev_info.pci_dev->addr;
 				conf.id = dev_info.pci_dev->id;
 			}
+			/* Get the interface default mac address */
+			rte_eth_macaddr_get(port_id,
+					(struct ether_addr *)&conf.mac_addr);
 
 			memset(&ops, 0, sizeof(ops));
 			ops.port_id = port_id;
 			ops.change_mtu = kni_change_mtu;
 			ops.config_network_if = kni_config_network_interface;
+			ops.config_mac_address = kni_config_mac_address;
 
 			kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
 		} else
diff --git a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
index 2ac879f..1a760de 100644
--- a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
+++ b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
@@ -80,6 +80,7 @@  enum rte_kni_req_id {
 	RTE_KNI_REQ_UNKNOWN = 0,
 	RTE_KNI_REQ_CHANGE_MTU,
 	RTE_KNI_REQ_CFG_NETWORK_IF,
+	RTE_KNI_REQ_CHANGE_MAC_ADDR,
 	RTE_KNI_REQ_MAX,
 };
 
@@ -92,6 +93,7 @@  struct rte_kni_request {
 	union {
 		uint32_t new_mtu;    /**< New MTU */
 		uint8_t if_up;       /**< 1: interface up, 0: interface down */
+		uint8_t mac_addr[6]; /**< MAC address for interface */
 	};
 	int32_t result;               /**< Result for processing request */
 } __attribute__((__packed__));
@@ -168,6 +170,7 @@  struct rte_kni_device_info {
 
 	/* mbuf size */
 	unsigned mbuf_size;
+	char mac_addr[6];
 };
 
 #define KNI_DEVICE "kni"
diff --git a/lib/librte_eal/linuxapp/kni/kni_misc.c b/lib/librte_eal/linuxapp/kni/kni_misc.c
index 7590f1f..b524d30 100644
--- a/lib/librte_eal/linuxapp/kni/kni_misc.c
+++ b/lib/librte_eal/linuxapp/kni/kni_misc.c
@@ -458,12 +458,17 @@  kni_ioctl_create(struct net *net, uint32_t ioctl_num,
 
 	if (kni->lad_dev)
 		ether_addr_copy(net_dev->dev_addr, kni->lad_dev->dev_addr);
-	else
-		/*
-		 * Generate random mac address. eth_random_addr() is the newer
-		 * version of generating mac address in linux kernel.
-		 */
-		random_ether_addr(net_dev->dev_addr);
+	else {
+		/* if user has provided a valid mac address */
+		if (is_valid_ether_addr((unsigned char *)(dev_info.mac_addr)))
+			memcpy(net_dev->dev_addr, dev_info.mac_addr, ETH_ALEN);
+		else
+			/*
+			 * Generate random mac address. eth_random_addr() is the
+			 * newer version of generating mac address in kernel.
+			 */
+			random_ether_addr(net_dev->dev_addr);
+	}
 
 	ret = register_netdev(net_dev);
 	if (ret) {
diff --git a/lib/librte_eal/linuxapp/kni/kni_net.c b/lib/librte_eal/linuxapp/kni/kni_net.c
index db9f489..3e02ea1 100644
--- a/lib/librte_eal/linuxapp/kni/kni_net.c
+++ b/lib/librte_eal/linuxapp/kni/kni_net.c
@@ -668,12 +668,24 @@  kni_net_rebuild_header(struct sk_buff *skb)
 static int
 kni_net_set_mac(struct net_device *netdev, void *p)
 {
+	int ret;
+	struct rte_kni_request req;
+	struct kni_dev *kni;
 	struct sockaddr *addr = p;
 
+	memset(&req, 0, sizeof(req));
+	req.req_id = RTE_KNI_REQ_CHANGE_MAC_ADDR;
+
 	if (!is_valid_ether_addr((unsigned char *)(addr->sa_data)))
 		return -EADDRNOTAVAIL;
+
+	memcpy(req.mac_addr, addr->sa_data, netdev->addr_len);
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-	return 0;
+
+	kni = netdev_priv(netdev);
+	ret = kni_net_process_request(kni, &req);
+
+	return (ret == 0 ? req.result : ret);
 }
 
 #ifdef HAVE_CHANGE_CARRIER_CB
diff --git a/lib/librte_kni/rte_kni.c b/lib/librte_kni/rte_kni.c
index 8eca8c0..04db3df 100644
--- a/lib/librte_kni/rte_kni.c
+++ b/lib/librte_kni/rte_kni.c
@@ -368,6 +368,8 @@  rte_kni_alloc(struct rte_mempool *pktmbuf_pool,
 	dev_info.group_id = conf->group_id;
 	dev_info.mbuf_size = conf->mbuf_size;
 
+	memcpy(dev_info.mac_addr, conf->mac_addr, ETHER_ADDR_LEN);
+
 	snprintf(ctx->name, RTE_KNI_NAMESIZE, "%s", intf_name);
 	snprintf(dev_info.name, RTE_KNI_NAMESIZE, "%s", intf_name);
 
@@ -528,6 +530,28 @@  rte_kni_release(struct rte_kni *kni)
 	return 0;
 }
 
+/* default callback for request of configuring device mac address */
+static int
+kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
+{
+	int ret = 0;
+
+	if (port_id >= rte_eth_dev_count() || port_id >= RTE_MAX_ETHPORTS) {
+		RTE_LOG(ERR, KNI, "Invalid port id %d\n", port_id);
+		return -EINVAL;
+	}
+
+	RTE_LOG(INFO, KNI, "Configure mac address of %d", port_id);
+
+	ret = rte_eth_dev_default_mac_addr_set(port_id,
+					       (struct ether_addr *)mac_addr);
+	if (ret < 0)
+		RTE_LOG(ERR, KNI, "Failed to config mac_addr for port %d\n",
+			port_id);
+
+	return ret;
+}
+
 int
 rte_kni_handle_request(struct rte_kni *kni)
 {
@@ -559,6 +583,14 @@  rte_kni_handle_request(struct rte_kni *kni)
 			req->result = kni->ops.config_network_if(\
 					kni->ops.port_id, req->if_up);
 		break;
+	case RTE_KNI_REQ_CHANGE_MAC_ADDR: /* Change MAC Address */
+		if (kni->ops.config_mac_address)
+			req->result = kni->ops.config_mac_address(
+					kni->ops.port_id, req->mac_addr);
+		else
+			req->result = kni_config_mac_address(
+					kni->ops.port_id, req->mac_addr);
+		break;
 	default:
 		RTE_LOG(ERR, KNI, "Unknown request id %u\n", req->req_id);
 		req->result = -EINVAL;
@@ -707,7 +739,9 @@  kni_check_request_register(struct rte_kni_ops *ops)
 	if( NULL == ops )
 		return KNI_REQ_NO_REGISTER;
 
-	if((NULL == ops->change_mtu) && (NULL == ops->config_network_if))
+	if ((NULL == ops->change_mtu)
+		&& (NULL == ops->config_network_if)
+		&& (NULL == ops->config_mac_address))
 		return KNI_REQ_NO_REGISTER;
 
 	return KNI_REQ_REGISTERED;
@@ -746,8 +780,8 @@  rte_kni_unregister_handlers(struct rte_kni *kni)
 		return -1;
 	}
 
-	kni->ops.change_mtu = NULL;
-	kni->ops.config_network_if = NULL;
+	memset(&kni->ops, 0, sizeof(struct rte_kni_ops));
+
 	return 0;
 }
 void
diff --git a/lib/librte_kni/rte_kni.h b/lib/librte_kni/rte_kni.h
index d43b5b2..a53329b 100644
--- a/lib/librte_kni/rte_kni.h
+++ b/lib/librte_kni/rte_kni.h
@@ -49,6 +49,7 @@ 
 #include <rte_pci.h>
 #include <rte_memory.h>
 #include <rte_mempool.h>
+#include <rte_ether.h>
 
 #include <exec-env/rte_kni_common.h>
 
@@ -70,6 +71,9 @@  struct rte_kni_ops {
 
 	/* Pointer to function of configuring network interface */
 	int (*config_network_if)(uint16_t port_id, uint8_t if_up);
+
+	/* Pointer to function of configuring mac address */
+	int (*config_mac_address)(uint16_t port_id, uint8_t mac_addr[]);
 };
 
 /**
@@ -87,6 +91,7 @@  struct rte_kni_conf {
 	unsigned mbuf_size; /* mbuf size */
 	struct rte_pci_addr addr;
 	struct rte_pci_id id;
+	char mac_addr[ETHER_ADDR_LEN]; /* MAC address assigned to KNI */
 
 	__extension__
 	uint8_t force_bind : 1; /* Flag to bind kernel thread */
diff --git a/test/test/test_kni.c b/test/test/test_kni.c
index b956727..06448c9 100644
--- a/test/test/test_kni.c
+++ b/test/test/test_kni.c
@@ -103,6 +103,7 @@  static const struct rte_eth_conf port_conf = {
 static struct rte_kni_ops kni_ops = {
 	.change_mtu = NULL,
 	.config_network_if = NULL,
+	.config_mac_address = NULL,
 };
 
 static unsigned lcore_master, lcore_ingress, lcore_egress;
@@ -260,6 +261,7 @@  test_kni_register_handler_mp(void)
 		struct rte_kni_ops ops = {
 			.change_mtu = kni_change_mtu,
 			.config_network_if = NULL,
+			.config_mac_address = NULL,
 		};
 
 		if (!kni) {