[v4,01/10] pinctrl: move gpio-axp209 to pinctrl

Message ID	cd2cb8f13fb359da0e300aa349bf48ca80451a69.1512135804.git-series.quentin.schulz@free-electrons.com
State	New
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Quentin Schulz <quentin.schulz@free-electrons.com> To: linus.walleij@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, wens@csie.org, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, lee.jones@linaro.org Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, thomas.petazzoni@free-electrons.com, linux-sunxi@googlegroups.com, Quentin Schulz <quentin.schulz@free-electrons.com> Subject: [PATCH v4 01/10] pinctrl: move gpio-axp209 to pinctrl Date: Fri, 1 Dec 2017 14:44:42 +0100 Message-Id: <cd2cb8f13fb359da0e300aa349bf48ca80451a69.1512135804.git-series.quentin.schulz@free-electrons.com> In-Reply-To: <cover.3ff63fdf302c6bda02ea7d160ad2aa5afee0899d.1512135804.git-series.quentin.schulz@free-electrons.com> References: <cover.3ff63fdf302c6bda02ea7d160ad2aa5afee0899d.1512135804.git-series.quentin.schulz@free-electrons.com> In-Reply-To: <cover.3ff63fdf302c6bda02ea7d160ad2aa5afee0899d.1512135804.git-series.quentin.schulz@free-electrons.com> References: <cover.3ff63fdf302c6bda02ea7d160ad2aa5afee0899d.1512135804.git-series.quentin.schulz@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk
Series	add pinmuxing support for pins in AXP209 and AXP813 PMICs \| expand [v4,00/10] add pinmuxing support for pins in AXP209 and AXP813 PMICs [v4,01/10] pinctrl: move gpio-axp209 to pinctrl [v4,02/10] pinctrl: axp209: add pinctrl features [v4,03/10] dt-bindings: gpio: gpio-axp209: add pinctrl features [v4,04/10] pinctrl: axp209: rename everything from gpio to pctl [v4,05/10] pinctrl: axp209: add programmable gpio_status_offset [v4,06/10] pinctrl: axp209: add programmable ADC muxing value [v4,08/10] mfd: axp20x: add pinctrl cell for AXP813 [v4,09/10] ARM: dtsi: axp81x: add GPIO DT node

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d6a8e85..395669b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -122,12 +122,6 @@ config GPIO_ATH79 Select this option to enable GPIO driver for Atheros AR71XX/AR724X/AR913X SoC devices. -config GPIO_AXP209 - tristate "X-Powers AXP209 PMIC GPIO Support" - depends on MFD_AXP20X - help - Say yes to enable GPIO support for the AXP209 PMIC - config GPIO_BCM_KONA bool "Broadcom Kona GPIO" depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4bc24fe..bc5dd67 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o -obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o diff --git a/drivers/gpio/gpio-axp209.c b/drivers/gpio/gpio-axp209.c deleted file mode 100644 index 4a346b7..0000000 --- a/drivers/gpio/gpio-axp209.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * AXP20x GPIO driver - * - * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/bitops.h> -#include <linux/device.h> -#include <linux/gpio/driver.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/mfd/axp20x.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> -#include <linux/slab.h> - -#define AXP20X_GPIO_FUNCTIONS 0x7 -#define AXP20X_GPIO_FUNCTION_OUT_LOW 0 -#define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 -#define AXP20X_GPIO_FUNCTION_INPUT 2 - -struct axp20x_gpio { - struct gpio_chip chip; - struct regmap *regmap; -}; - -static int axp20x_gpio_get_reg(unsigned offset) -{ - switch (offset) { - case 0: - return AXP20X_GPIO0_CTRL; - case 1: - return AXP20X_GPIO1_CTRL; - case 2: - return AXP20X_GPIO2_CTRL; - } - - return -EINVAL; -} - -static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) -{ - struct axp20x_gpio *gpio = gpiochip_get_data(chip); - int reg; - - reg = axp20x_gpio_get_reg(offset); - if (reg < 0) - return reg; - - return regmap_update_bits(gpio->regmap, reg, - AXP20X_GPIO_FUNCTIONS, - AXP20X_GPIO_FUNCTION_INPUT); -} - -static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct axp20x_gpio *gpio = gpiochip_get_data(chip); - unsigned int val; - int ret; - - ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val); - if (ret) - return ret; - - return !!(val & BIT(offset + 4)); -} - -static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) -{ - struct axp20x_gpio *gpio = gpiochip_get_data(chip); - unsigned int val; - int reg, ret; - - reg = axp20x_gpio_get_reg(offset); - if (reg < 0) - return reg; - - ret = regmap_read(gpio->regmap, reg, &val); - if (ret) - return ret; - - /* - * This shouldn't really happen if the pin is in use already, - * or if it's not in use yet, it doesn't matter since we're - * going to change the value soon anyway. Default to output. - */ - if ((val & AXP20X_GPIO_FUNCTIONS) > 2) - return 0; - - /* - * The GPIO directions are the three lowest values. - * 2 is input, 0 and 1 are output - */ - return val & 2; -} - -static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct axp20x_gpio *gpio = gpiochip_get_data(chip); - int reg; - - reg = axp20x_gpio_get_reg(offset); - if (reg < 0) - return reg; - - return regmap_update_bits(gpio->regmap, reg, - AXP20X_GPIO_FUNCTIONS, - value ? AXP20X_GPIO_FUNCTION_OUT_HIGH - : AXP20X_GPIO_FUNCTION_OUT_LOW); -} - -static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, - int value) -{ - axp20x_gpio_output(chip, offset, value); -} - -static int axp20x_gpio_probe(struct platform_device *pdev) -{ - struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); - struct axp20x_gpio *gpio; - int ret; - - if (!of_device_is_available(pdev->dev.of_node)) - return -ENODEV; - - if (!axp20x) { - dev_err(&pdev->dev, "Parent drvdata not set\n"); - return -EINVAL; - } - - gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); - if (!gpio) - return -ENOMEM; - - gpio->chip.base = -1; - gpio->chip.can_sleep = true; - gpio->chip.parent = &pdev->dev; - gpio->chip.label = dev_name(&pdev->dev); - gpio->chip.owner = THIS_MODULE; - gpio->chip.get = axp20x_gpio_get; - gpio->chip.get_direction = axp20x_gpio_get_direction; - gpio->chip.set = axp20x_gpio_set; - gpio->chip.direction_input = axp20x_gpio_input; - gpio->chip.direction_output = axp20x_gpio_output; - gpio->chip.ngpio = 3; - - gpio->regmap = axp20x->regmap; - - ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); - if (ret) { - dev_err(&pdev->dev, "Failed to register GPIO chip\n"); - return ret; - } - - dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); - - return 0; -} - -static const struct of_device_id axp20x_gpio_match[] = { - { .compatible = "x-powers,axp209-gpio" }, - { } -}; -MODULE_DEVICE_TABLE(of, axp20x_gpio_match); - -static struct platform_driver axp20x_gpio_driver = { - .probe = axp20x_gpio_probe, - .driver = { - .name = "axp20x-gpio", - .of_match_table = axp20x_gpio_match, - }, -}; - -module_platform_driver(axp20x_gpio_driver); - -MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); -MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 4571cc0..58e8cc8 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -63,6 +63,12 @@ config PINCTRL_AS3722 open drain configuration for the GPIO pins of AS3722 devices. It also supports the GPIO functionality through gpiolib. +config PINCTRL_AXP209 + tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support" + depends on MFD_AXP20X + help + Say yes to enable pinctrl and GPIO support for the AXP209 PMIC + config PINCTRL_BF54x def_bool y if BF54x select PINCTRL_ADI2 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index d0d4844..4777f15 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o +obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c new file mode 100644 index 0000000..4a346b7 --- /dev/null +++ b/drivers/pinctrl/pinctrl-axp209.c @@ -0,0 +1,188 @@ +/* + * AXP20x GPIO driver + * + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define AXP20X_GPIO_FUNCTIONS 0x7 +#define AXP20X_GPIO_FUNCTION_OUT_LOW 0 +#define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 +#define AXP20X_GPIO_FUNCTION_INPUT 2 + +struct axp20x_gpio { + struct gpio_chip chip; + struct regmap *regmap; +}; + +static int axp20x_gpio_get_reg(unsigned offset) +{ + switch (offset) { + case 0: + return AXP20X_GPIO0_CTRL; + case 1: + return AXP20X_GPIO1_CTRL; + case 2: + return AXP20X_GPIO2_CTRL; + } + + return -EINVAL; +} + +static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct axp20x_gpio *gpio = gpiochip_get_data(chip); + int reg; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + return regmap_update_bits(gpio->regmap, reg, + AXP20X_GPIO_FUNCTIONS, + AXP20X_GPIO_FUNCTION_INPUT); +} + +static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct axp20x_gpio *gpio = gpiochip_get_data(chip); + unsigned int val; + int ret; + + ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val); + if (ret) + return ret; + + return !!(val & BIT(offset + 4)); +} + +static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct axp20x_gpio *gpio = gpiochip_get_data(chip); + unsigned int val; + int reg, ret; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + ret = regmap_read(gpio->regmap, reg, &val); + if (ret) + return ret; + + /* + * This shouldn't really happen if the pin is in use already, + * or if it's not in use yet, it doesn't matter since we're + * going to change the value soon anyway. Default to output. + */ + if ((val & AXP20X_GPIO_FUNCTIONS) > 2) + return 0; + + /* + * The GPIO directions are the three lowest values. + * 2 is input, 0 and 1 are output + */ + return val & 2; +} + +static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct axp20x_gpio *gpio = gpiochip_get_data(chip); + int reg; + + reg = axp20x_gpio_get_reg(offset); + if (reg < 0) + return reg; + + return regmap_update_bits(gpio->regmap, reg, + AXP20X_GPIO_FUNCTIONS, + value ? AXP20X_GPIO_FUNCTION_OUT_HIGH + : AXP20X_GPIO_FUNCTION_OUT_LOW); +} + +static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + axp20x_gpio_output(chip, offset, value); +} + +static int axp20x_gpio_probe(struct platform_device *pdev) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct axp20x_gpio *gpio; + int ret; + + if (!of_device_is_available(pdev->dev.of_node)) + return -ENODEV; + + if (!axp20x) { + dev_err(&pdev->dev, "Parent drvdata not set\n"); + return -EINVAL; + } + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->chip.base = -1; + gpio->chip.can_sleep = true; + gpio->chip.parent = &pdev->dev; + gpio->chip.label = dev_name(&pdev->dev); + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = axp20x_gpio_get; + gpio->chip.get_direction = axp20x_gpio_get_direction; + gpio->chip.set = axp20x_gpio_set; + gpio->chip.direction_input = axp20x_gpio_input; + gpio->chip.direction_output = axp20x_gpio_output; + gpio->chip.ngpio = 3; + + gpio->regmap = axp20x->regmap; + + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); + if (ret) { + dev_err(&pdev->dev, "Failed to register GPIO chip\n"); + return ret; + } + + dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); + + return 0; +} + +static const struct of_device_id axp20x_gpio_match[] = { + { .compatible = "x-powers,axp209-gpio" }, + { } +}; +MODULE_DEVICE_TABLE(of, axp20x_gpio_match); + +static struct platform_driver axp20x_gpio_driver = { + .probe = axp20x_gpio_probe, + .driver = { + .name = "axp20x-gpio", + .of_match_table = axp20x_gpio_match, + }, +}; + +module_platform_driver(axp20x_gpio_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); +MODULE_LICENSE("GPL");

[v4,01/10] pinctrl: move gpio-axp209 to pinctrl

Commit Message

Patch