From patchwork Thu Dec 14 11:53:56 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jorge Ramirez-Ortiz X-Patchwork-Id: 121911 Delivered-To: patch@linaro.org Received: by 10.140.22.227 with SMTP id 90csp6700714qgn; Thu, 14 Dec 2017 03:55:56 -0800 (PST) X-Google-Smtp-Source: ACJfBouPYWzMHwrlO17ce7UCIXbsLyPrcWm3Fx2tYm19E+GYJaxf//CyMeLPIcALefGSvwhWbbx2 X-Received: by 10.80.183.172 with SMTP id h41mr12512919ede.149.1513252556051; Thu, 14 Dec 2017 03:55:56 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1513252556; cv=none; d=google.com; s=arc-20160816; b=UuuPRbqFzZQpbCe1bXE+22clUKjG2WoJ9Y+yauQBmpnB2WQDjrNP2Let0eR98Xb9/O HHVM2/PCPfgzx9z0uiNOu1mEjp7rYUnAZ+h38Y62DnArsIPU96RFAcDgaE/x2GCvMw+n qApHDYFfi+Ou1hU2O8Wd3lwjZ4AbD7T/594ytRmAdEpTr5B7FTpoarOJxJjLj+NWyATX nU2S5G6RGpnB/hl+1lHZzM4aU6/2HDkGxtI1qtGIxUJuqythhbhy77Sr3x4SAqm+YOr5 KAKdX3Jz/BpXVd3s/loN9Zq7c55ZTOZ90em7mHxCm1EbIYqE1qRK/p8xmsfWIIpoVUCl DIIw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:mime-version :list-subscribe:list-help:list-post:list-archive:list-unsubscribe :list-id:precedence:subject:references:in-reply-to:message-id:date :to:from:dkim-signature:arc-authentication-results; bh=wx67NiFczlWkCXbSjhosye3CneS/GfsagRq/h2Xba1s=; b=iOWUL1OUnWvfvUEyrgMeBPLFMSpMbgz7NQsre1wfVkuAsnKWKVdIfcWQ1jn0dGv9CF 9v5AWBWQGV5MuA3/XDOHOG8UhBUAREGxAZoz6sl/3PbxzH1qev0bKpAufADQ+2RxmQUe PjQqPE3X9p6m1uk/0UJnuE0SM+CArWc+4/2vAxNFX9tNQOii1PUeZT2ThRV704aZK950 O0kXXEimGoW2yhVstazWJPE+/Y4lPlmrctGTVwobgA4rUoqFpJnEhXgOGaah7nS9VMmf PyEo8PK2lbZoL0Qg8GdTtxQEeoc8eprSbHkIi0G0Kh1DEAcBmZR5zspoGFkgzfalxNrz tYwA== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=BPkP3zu7; spf=pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 81.169.180.215 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from lists.denx.de (dione.denx.de. [81.169.180.215]) by mx.google.com with ESMTP id f13si2901008edm.455.2017.12.14.03.55.55; Thu, 14 Dec 2017 03:55:56 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 81.169.180.215 as permitted sender) client-ip=81.169.180.215; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=BPkP3zu7; spf=pass (google.com: best guess record for domain of u-boot-bounces@lists.denx.de designates 81.169.180.215 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: by lists.denx.de (Postfix, from userid 105) id 974E0C21DBB; Thu, 14 Dec 2017 11:55:30 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on lists.denx.de X-Spam-Level: X-Spam-Status: No, score=-0.0 required=5.0 tests=RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL, T_DKIM_INVALID autolearn=unavailable autolearn_force=no version=3.4.0 Received: from lists.denx.de (localhost [IPv6:::1]) by lists.denx.de (Postfix) with ESMTP id E8DDCC21DF7; Thu, 14 Dec 2017 11:54:21 +0000 (UTC) Received: by lists.denx.de (Postfix, from userid 105) id 6378DC21E41; Thu, 14 Dec 2017 11:54:14 +0000 (UTC) Received: from mail-wm0-f66.google.com (mail-wm0-f66.google.com [74.125.82.66]) by lists.denx.de (Postfix) with ESMTPS id 0D840C21DA5 for ; Thu, 14 Dec 2017 11:54:10 +0000 (UTC) Received: by mail-wm0-f66.google.com with SMTP id i11so10851159wmf.4 for ; Thu, 14 Dec 2017 03:54:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:subject:date:message-id:in-reply-to:references; bh=Wk0esRqMqAKjw8sILX1clugGhY7dtDJXECSPOIXKXlI=; b=BPkP3zu7Xc8i+NLdjvKTgLeNNWcaiBR9N7cv5Nw7TPzWderq0GoJLl8C345UDZuXjx UMTEcKrkFvvvfdhw4ZrqptnPA29p/rTPzbhIIcPunP3ae2ORtJD7OGXgRKBRWP7NacNN TPgr4d/4r+xIrnB0fyOL4+bvf6xXd/JU2dX7E= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references; bh=Wk0esRqMqAKjw8sILX1clugGhY7dtDJXECSPOIXKXlI=; b=By0sMObz25D0EdTxT0jtJ0NvOX39pWG8rmmrjyOAypRhejTD//CrKxIYnJfzXJHUJj t0+ixg86mSVyZWtNkamfJR3fpX5geEyPyHeSflgfbrpR8NcGt/h9pJHfLBbdHzBKy36B 2RFDJArBTao+VLjzgXkCa6ZE2wPeTaPqKdOW2O57YYUfpfVxravu4Ic/cXcQ3YUYvAd4 iAz0IA0DAEKhEoqYqofamciEc10SFrw4ruLWciFclnDU98SrF+LaoGXUboJc4yn0mjSS aOeuHdlh8QtvnlrllDStwMFt4HHDWE1W5EWLCuFCMs8whAU82Kqq5261UcBKlj7MdE3C 6Njg== X-Gm-Message-State: AKGB3mJr3rrZiQO+IO6OYB9WTuojQSE1otnk4mC+ZDmxuJOluXduppUn iA+mkj8DQNh7HoP4VRxsydV3xQ== X-Received: by 10.28.108.11 with SMTP id h11mr1948881wmc.28.1513252449476; Thu, 14 Dec 2017 03:54:09 -0800 (PST) Received: from igloo.80.58.61.254 (141.pool85-51-114.dynamic.orange.es. [85.51.114.141]) by smtp.gmail.com with ESMTPSA id e197sm11797509wmf.42.2017.12.14.03.54.07 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Thu, 14 Dec 2017 03:54:08 -0800 (PST) From: Jorge Ramirez-Ortiz To: jorge.ramirez-ortiz@linaro.org, u-boot@lists.denx.de Date: Thu, 14 Dec 2017 12:53:56 +0100 Message-Id: <1513252441-29520-3-git-send-email-jorge.ramirez-ortiz@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1513252441-29520-1-git-send-email-jorge.ramirez-ortiz@linaro.org> References: <1513252441-29520-1-git-send-email-jorge.ramirez-ortiz@linaro.org> Subject: [U-Boot] [PATCH 3/8] arm: mach-snapdragon: refactor clock driver X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.18 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" In preparation to add support for the Dragonboard820c (APQ8096), refactor the current Snapdragon clock driver. No new functionality has been added. Signed-off-by: Jorge Ramirez-Ortiz --- arch/arm/mach-snapdragon/Makefile | 6 +- arch/arm/mach-snapdragon/clock-apq8016.c | 181 ++------------------- arch/arm/mach-snapdragon/clock-snapdragon.c | 134 +++++++++++++++ arch/arm/mach-snapdragon/clock-snapdragon.h | 40 +++++ .../mach-snapdragon/include/mach/sysmap-apq8016.h | 29 +++- 5 files changed, 217 insertions(+), 173 deletions(-) create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.c create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.h diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile index d82a04d..74f90dc 100644 --- a/arch/arm/mach-snapdragon/Makefile +++ b/arch/arm/mach-snapdragon/Makefile @@ -4,5 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += clock-apq8016.o -obj-y += sysmap-apq8016.o +obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o +obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o +obj-y += clock-snapdragon.o + diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c index da05015..a242417 100644 --- a/arch/arm/mach-snapdragon/clock-apq8016.c +++ b/arch/arm/mach-snapdragon/clock-apq8016.c @@ -14,146 +14,12 @@ #include #include #include +#include "clock-snapdragon.h" /* GPLL0 clock control registers */ -#define GPLL0_STATUS 0x2101C #define GPLL0_STATUS_ACTIVE BIT(17) - -#define APCS_GPLL_ENA_VOTE 0x45000 #define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0) -/* vote reg for blsp1 clock */ -#define APCS_CLOCK_BRANCH_ENA_VOTE 0x45004 -#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10) - -/* SDC(n) clock control registers; n=1,2 */ - -/* block control register */ -#define SDCC_BCR(n) ((n * 0x1000) + 0x41000) -/* cmd */ -#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) -/* cfg */ -#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) -/* m */ -#define SDCC_M(n) ((n * 0x1000) + 0x4100C) -/* n */ -#define SDCC_N(n) ((n * 0x1000) + 0x41010) -/* d */ -#define SDCC_D(n) ((n * 0x1000) + 0x41014) -/* branch control */ -#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) -#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C) - -/* BLSP1 AHB clock (root clock for BLSP) */ -#define BLSP1_AHB_CBCR 0x1008 - -/* Uart clock control registers */ -#define BLSP1_UART2_BCR 0x3028 -#define BLSP1_UART2_APPS_CBCR 0x302C -#define BLSP1_UART2_APPS_CMD_RCGR 0x3034 -#define BLSP1_UART2_APPS_CFG_RCGR 0x3038 -#define BLSP1_UART2_APPS_M 0x303C -#define BLSP1_UART2_APPS_N 0x3040 -#define BLSP1_UART2_APPS_D 0x3044 - -/* CBCR register fields */ -#define CBCR_BRANCH_ENABLE_BIT BIT(0) -#define CBCR_BRANCH_OFF_BIT BIT(31) - -struct msm_clk_priv { - phys_addr_t base; -}; - -/* Enable clock controlled by CBC soft macro */ -static void clk_enable_cbc(phys_addr_t cbcr) -{ - setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT); - - while (readl(cbcr) & CBCR_BRANCH_OFF_BIT) - ; -} - -/* clock has 800MHz */ -static void clk_enable_gpll0(phys_addr_t base) -{ - if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) - return; /* clock already enabled */ - - setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0); - - while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0) - ; -} - -#define APPS_CMD_RGCR_UPDATE BIT(0) - -/* Update clock command via CMD_RGCR */ -static void clk_bcr_update(phys_addr_t apps_cmd_rgcr) -{ - setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE); - - /* Wait for frequency to be updated. */ - while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE) - ; -} - -struct bcr_regs { - uintptr_t cfg_rcgr; - uintptr_t cmd_rcgr; - uintptr_t M; - uintptr_t N; - uintptr_t D; -}; - -/* RCGR_CFG register fields */ -#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */ - -/* sources */ -#define CFG_CLK_SRC_CXO (0 << 8) -#define CFG_CLK_SRC_GPLL0 (1 << 8) -#define CFG_CLK_SRC_MASK (7 << 8) - -/* Mask for supported fields */ -#define CFG_MASK 0x3FFF - -#define CFG_DIVIDER_MASK 0x1F - -/* root set rate for clocks with half integer and MND divider */ -static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, - int div, int m, int n, int source) -{ - uint32_t cfg; - /* M value for MND divider. */ - uint32_t m_val = m; - /* NOT(N-M) value for MND divider. */ - uint32_t n_val = ~((n)-(m)) * !!(n); - /* NOT 2D value for MND divider. */ - uint32_t d_val = ~(n); - - /* Program MND values */ - writel(m_val, base + regs->M); - writel(n_val, base + regs->N); - writel(d_val, base + regs->D); - - /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); - cfg &= ~CFG_MASK; - cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */ - - /* Set the divider; HW permits fraction dividers (+0.5), but - for simplicity, we will support integers only */ - if (div) - cfg |= (2 * div - 1) & CFG_DIVIDER_MASK; - - if (n_val) - cfg |= CFG_MODE_DUAL_EDGE; - - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ - - /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); -} - static const struct bcr_regs sdc_regs[] = { { .cfg_rcgr = SDCC_CFG_RCGR(1), @@ -171,7 +37,14 @@ static const struct bcr_regs sdc_regs[] = { } }; -/* Init clock for SDHCI controller */ +static struct gpll0_ctrl gpll0_ctrl = { + .status = GPLL0_STATUS, + .status_bit = GPLL0_STATUS_ACTIVE, + .ena_vote = APCS_GPLL_ENA_VOTE, + .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0, +}; + +/* SDHCI */ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) { int div = 8; /* 100MHz default */ @@ -183,7 +56,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) /* 800Mhz/div, gpll0 */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, CFG_CLK_SRC_GPLL0); - clk_enable_gpll0(priv->base); + clk_enable_gpll0(priv->base, &gpll0_ctrl); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); return rate; @@ -197,7 +70,7 @@ static const struct bcr_regs uart2_regs = { .D = BLSP1_UART2_APPS_D, }; -/* Init UART clock, 115200 */ +/* UART: 115200 */ static int clk_init_uart(struct msm_clk_priv *priv) { /* Enable iface clk */ @@ -205,7 +78,7 @@ static int clk_init_uart(struct msm_clk_priv *priv) /* 7372800 uart block clock @ GPLL0 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625, CFG_CLK_SRC_GPLL0); - clk_enable_gpll0(priv->base); + clk_enable_gpll0(priv->base, &gpll0_ctrl); /* Enable core clk */ clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); @@ -230,33 +103,3 @@ ulong msm_set_rate(struct clk *clk, ulong rate) return 0; } } - -static int msm_clk_probe(struct udevice *dev) -{ - struct msm_clk_priv *priv = dev_get_priv(dev); - - priv->base = devfdt_get_addr(dev); - if (priv->base == FDT_ADDR_T_NONE) - return -EINVAL; - - return 0; -} - -static struct clk_ops msm_clk_ops = { - .set_rate = msm_set_rate, -}; - -static const struct udevice_id msm_clk_ids[] = { - { .compatible = "qcom,gcc-msm8916" }, - { .compatible = "qcom,gcc-apq8016" }, - { } -}; - -U_BOOT_DRIVER(clk_msm) = { - .name = "clk_msm", - .id = UCLASS_CLK, - .of_match = msm_clk_ids, - .ops = &msm_clk_ops, - .priv_auto_alloc_size = sizeof(struct msm_clk_priv), - .probe = msm_clk_probe, -}; diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c new file mode 100644 index 0000000..da44544 --- /dev/null +++ b/arch/arm/mach-snapdragon/clock-snapdragon.c @@ -0,0 +1,134 @@ +/* + * Clock drivers for Qualcomm APQ8016, APQ8096 + * + * (C) Copyright 2015 Mateusz Kulikowski + * + * Based on Little Kernel driver, simplified + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include +#include +#include +#include "clock-snapdragon.h" + +/* CBCR register fields */ +#define CBCR_BRANCH_ENABLE_BIT BIT(0) +#define CBCR_BRANCH_OFF_BIT BIT(31) + +extern ulong msm_set_rate(struct clk *clk, ulong rate); + +/* Enable clock controlled by CBC soft macro */ +void clk_enable_cbc(phys_addr_t cbcr) +{ + setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT); + + while (readl(cbcr) & CBCR_BRANCH_OFF_BIT) + ; +} + +void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0) +{ + if (readl(base + gpll0->status) & gpll0->status_bit) + return; /* clock already enabled */ + + setbits_le32(base + gpll0->ena_vote, gpll0->vote_bit); + + while ((readl(base + gpll0->status) & gpll0->status_bit) == 0) + ; +} + +#define APPS_CMD_RGCR_UPDATE BIT(0) + +/* Update clock command via CMD_RGCR */ +void clk_bcr_update(phys_addr_t apps_cmd_rgcr) +{ + setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE); + + /* Wait for frequency to be updated. */ + while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE) + ; +} + +#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */ + +#define CFG_MASK 0x3FFF + +#define CFG_DIVIDER_MASK 0x1F + +/* root set rate for clocks with half integer and MND divider */ +void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, + int div, int m, int n, int source) +{ + uint32_t cfg; + /* M value for MND divider. */ + uint32_t m_val = m; + /* NOT(N-M) value for MND divider. */ + uint32_t n_val = ~((n)-(m)) * !!(n); + /* NOT 2D value for MND divider. */ + uint32_t d_val = ~(n); + + /* Program MND values */ + writel(m_val, base + regs->M); + writel(n_val, base + regs->N); + writel(d_val, base + regs->D); + + /* setup src select and divider */ + cfg = readl(base + regs->cfg_rcgr); + cfg &= ~CFG_MASK; + cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */ + + /* Set the divider; HW permits fraction dividers (+0.5), but + for simplicity, we will support integers only */ + if (div) + cfg |= (2 * div - 1) & CFG_DIVIDER_MASK; + + if (n_val) + cfg |= CFG_MODE_DUAL_EDGE; + + writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + + /* Inform h/w to start using the new config. */ + clk_bcr_update(base + regs->cmd_rcgr); +} + +static int msm_clk_probe(struct udevice *dev) +{ + struct msm_clk_priv *priv = dev_get_priv(dev); + + priv->base = devfdt_get_addr(dev); + if (priv->base == FDT_ADDR_T_NONE) + return -EINVAL; + + return 0; +} + +static ulong msm_clk_set_rate(struct clk *clk, ulong rate) +{ + return msm_set_rate(clk, rate); +} + +static struct clk_ops msm_clk_ops = { + .set_rate = msm_clk_set_rate, +}; + +static const struct udevice_id msm_clk_ids[] = { + { .compatible = "qcom,gcc-msm8916" }, + { .compatible = "qcom,gcc-apq8016" }, + { .compatible = "qcom,gcc-msm8996" }, + { .compatible = "qcom,gcc-apq8096" }, + { } +}; + +U_BOOT_DRIVER(clk_msm) = { + .name = "clk_msm", + .id = UCLASS_CLK, + .of_match = msm_clk_ids, + .ops = &msm_clk_ops, + .priv_auto_alloc_size = sizeof(struct msm_clk_priv), + .probe = msm_clk_probe, +}; diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h b/arch/arm/mach-snapdragon/clock-snapdragon.h new file mode 100644 index 0000000..c087eb9 --- /dev/null +++ b/arch/arm/mach-snapdragon/clock-snapdragon.h @@ -0,0 +1,40 @@ +/* + * Qualcomm APQ8016, APQ8096 + * + * (C) Copyright 2017 Jorge Ramirez-Ortiz + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _CLOCK_SNAPDRAGON_H +#define _CLOCK_SNAPDRAGON_H + +#define CFG_CLK_SRC_CXO (0 << 8) +#define CFG_CLK_SRC_GPLL0 (1 << 8) +#define CFG_CLK_SRC_MASK (7 << 8) + +struct gpll0_ctrl { + uintptr_t status; + int status_bit; + uintptr_t ena_vote; + int vote_bit; +}; + +struct bcr_regs { + uintptr_t cfg_rcgr; + uintptr_t cmd_rcgr; + uintptr_t M; + uintptr_t N; + uintptr_t D; +}; + +struct msm_clk_priv { + phys_addr_t base; +}; + +void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0); +void clk_bcr_update(phys_addr_t apps_cmd_rgcr); +void clk_enable_cbc(phys_addr_t cbcr); +void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, + int div, int m, int n, int source); + +#endif diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h index cdbfad0..1094b14 100644 --- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h +++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h @@ -8,7 +8,32 @@ #ifndef _MACH_SYSMAP_APQ8016_H #define _MACH_SYSMAP_APQ8016_H -#define GICD_BASE 0x0b000000 -#define GICC_BASE 0x0a20c000 +#define GICD_BASE (0x0b000000) +#define GICC_BASE (0x0a20c000) + +/* Clocks: (from CLK_CTL_BASE) */ +#define GPLL0_STATUS (0x2101C) +#define APCS_GPLL_ENA_VOTE (0x45000) + +#define SDCC_BCR(n) ((n * 0x1000) + 0x41000) +#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) +#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) +#define SDCC_M(n) ((n * 0x1000) + 0x4100C) +#define SDCC_N(n) ((n * 0x1000) + 0x41010) +#define SDCC_D(n) ((n * 0x1000) + 0x41014) +#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) +#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C) + +/* BLSP1 AHB clock (root clock for BLSP) */ +#define BLSP1_AHB_CBCR 0x1008 + +/* Uart clock control registers */ +#define BLSP1_UART2_BCR (0x3028) +#define BLSP1_UART2_APPS_CBCR (0x302C) +#define BLSP1_UART2_APPS_CMD_RCGR (0x3034) +#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) +#define BLSP1_UART2_APPS_M (0x303C) +#define BLSP1_UART2_APPS_N (0x3040) +#define BLSP1_UART2_APPS_D (0x3044) #endif