diff mbox

ARM: U300: bump IRQs to offset 32

Message ID 1350491679-32685-1-git-send-email-linus.walleij@stericsson.com
State Accepted
Commit d4a31ee8997b2fbd82837182363cf8fa84abf347
Headers show

Commit Message

Linus Walleij Oct. 17, 2012, 4:34 p.m. UTC
From: Linus Walleij <linus.walleij@linaro.org>

The U300 IRQs were bumped once to offset to 1 (in order to avoid
using IRQ 0 which is now NO_IRQ). This was OK as we were still
passing the number of irqs in the .nr_irqs field of the machine,
with descriptors allocated at boot time.

However .nr_irqs should be 0, leading the system to reserve the
first 16 IRQs. Then the VIC driver will complain that IRQs 1
thru 15 are pre-allocated, so to avoid this and use free
descriptors, move all IRQs up to offset 32.

This will all be done away with as we migrate to device tree,
so it is an interim solution.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-u300/core.c              |   2 +-
 arch/arm/mach-u300/include/mach/irqs.h | 116 ++++++++++++++++-----------------
 2 files changed, 59 insertions(+), 59 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b8efac4..603c08e 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1804,7 +1804,7 @@  MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
 	.atag_offset	= 0x100,
 	.map_io		= u300_map_io,
-	.nr_irqs	= NR_IRQS_U300,
+	.nr_irqs	= 0,
 	.init_irq	= u300_init_irq,
 	.handle_irq	= vic_handle_irq,
 	.timer		= &u300_timer,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index e27425a..e85ec38 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,70 +12,70 @@ 
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		1
-#define IRQ_U300_INTCON1_START		33
+#define IRQ_U300_INTCON0_START		32
+#define IRQ_U300_INTCON1_START		64
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		1
-#define IRQ_U300_IRQ1_EXT		2
-#define IRQ_U300_DMA			3
-#define IRQ_U300_VIDEO_ENC_0		4
-#define IRQ_U300_VIDEO_ENC_1		5
-#define IRQ_U300_AAIF_RX		6
-#define IRQ_U300_AAIF_TX		7
-#define IRQ_U300_AAIF_VGPIO		8
-#define IRQ_U300_AAIF_WAKEUP		9
-#define IRQ_U300_PCM_I2S0_FRAME		10
-#define IRQ_U300_PCM_I2S0_FIFO		11
-#define IRQ_U300_PCM_I2S1_FRAME		12
-#define IRQ_U300_PCM_I2S1_FIFO		13
-#define IRQ_U300_XGAM_GAMCON		14
-#define IRQ_U300_XGAM_CDI		15
-#define IRQ_U300_XGAM_CDICON		16
-#define IRQ_U300_XGAM_PDI		18
-#define IRQ_U300_XGAM_PDICON		19
-#define IRQ_U300_XGAM_GAMEACC		20
-#define IRQ_U300_XGAM_MCIDCT		21
-#define IRQ_U300_APEX			22
-#define IRQ_U300_UART0			23
-#define IRQ_U300_SPI			24
-#define IRQ_U300_TIMER_APP_OS		25
-#define IRQ_U300_TIMER_APP_DD		26
-#define IRQ_U300_TIMER_APP_GP1		27
-#define IRQ_U300_TIMER_APP_GP2		28
-#define IRQ_U300_TIMER_OS		29
-#define IRQ_U300_TIMER_MS		30
-#define IRQ_U300_KEYPAD_KEYBF		31
-#define IRQ_U300_KEYPAD_KEYBR		32
+#define IRQ_U300_IRQ0_EXT		32
+#define IRQ_U300_IRQ1_EXT		33
+#define IRQ_U300_DMA			34
+#define IRQ_U300_VIDEO_ENC_0		35
+#define IRQ_U300_VIDEO_ENC_1		36
+#define IRQ_U300_AAIF_RX		37
+#define IRQ_U300_AAIF_TX		38
+#define IRQ_U300_AAIF_VGPIO		39
+#define IRQ_U300_AAIF_WAKEUP		40
+#define IRQ_U300_PCM_I2S0_FRAME		41
+#define IRQ_U300_PCM_I2S0_FIFO		42
+#define IRQ_U300_PCM_I2S1_FRAME		43
+#define IRQ_U300_PCM_I2S1_FIFO		44
+#define IRQ_U300_XGAM_GAMCON		45
+#define IRQ_U300_XGAM_CDI		46
+#define IRQ_U300_XGAM_CDICON		47
+#define IRQ_U300_XGAM_PDI		49
+#define IRQ_U300_XGAM_PDICON		50
+#define IRQ_U300_XGAM_GAMEACC		51
+#define IRQ_U300_XGAM_MCIDCT		52
+#define IRQ_U300_APEX			53
+#define IRQ_U300_UART0			54
+#define IRQ_U300_SPI			55
+#define IRQ_U300_TIMER_APP_OS		56
+#define IRQ_U300_TIMER_APP_DD		57
+#define IRQ_U300_TIMER_APP_GP1		58
+#define IRQ_U300_TIMER_APP_GP2		59
+#define IRQ_U300_TIMER_OS		60
+#define IRQ_U300_TIMER_MS		61
+#define IRQ_U300_KEYPAD_KEYBF		62
+#define IRQ_U300_KEYPAD_KEYBR		63
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		33
-#define IRQ_U300_GPIO_PORT1		34
-#define IRQ_U300_GPIO_PORT2		35
+#define IRQ_U300_GPIO_PORT0		64
+#define IRQ_U300_GPIO_PORT1		65
+#define IRQ_U300_GPIO_PORT2		66
 
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			36
-#define IRQ_U300_EVHIST			37
-#define IRQ_U300_MSPRO			38
-#define IRQ_U300_MMCSD_MCIINTR0		39
-#define IRQ_U300_MMCSD_MCIINTR1		40
-#define IRQ_U300_I2C0			41
-#define IRQ_U300_I2C1			42
-#define IRQ_U300_RTC			43
-#define IRQ_U300_NFIF			44
-#define IRQ_U300_NFIF2			45
+#define IRQ_U300_WDOG			67
+#define IRQ_U300_EVHIST			68
+#define IRQ_U300_MSPRO			69
+#define IRQ_U300_MMCSD_MCIINTR0		70
+#define IRQ_U300_MMCSD_MCIINTR1		71
+#define IRQ_U300_I2C0			72
+#define IRQ_U300_I2C1			73
+#define IRQ_U300_RTC			74
+#define IRQ_U300_NFIF			75
+#define IRQ_U300_NFIF2			76
 
 /* The DB3350-specific interrupt lines */
-#define IRQ_U300_ISP_F0			46
-#define IRQ_U300_ISP_F1			47
-#define IRQ_U300_ISP_F2			48
-#define IRQ_U300_ISP_F3			49
-#define IRQ_U300_ISP_F4			50
-#define IRQ_U300_GPIO_PORT3		51
-#define IRQ_U300_SYSCON_PLL_LOCK	52
-#define IRQ_U300_UART1			53
-#define IRQ_U300_GPIO_PORT4		54
-#define IRQ_U300_GPIO_PORT5		55
-#define IRQ_U300_GPIO_PORT6		56
-#define U300_VIC_IRQS_END		57
+#define IRQ_U300_ISP_F0			77
+#define IRQ_U300_ISP_F1			78
+#define IRQ_U300_ISP_F2			79
+#define IRQ_U300_ISP_F3			80
+#define IRQ_U300_ISP_F4			81
+#define IRQ_U300_GPIO_PORT3		82
+#define IRQ_U300_SYSCON_PLL_LOCK	83
+#define IRQ_U300_UART1			84
+#define IRQ_U300_GPIO_PORT4		85
+#define IRQ_U300_GPIO_PORT5		86
+#define IRQ_U300_GPIO_PORT6		87
+#define U300_VIC_IRQS_END		88
 
 /* Maximum 8*7 GPIO lines */
 #ifdef CONFIG_PINCTRL_COH901