[6/7] libfdt: migrate libfdt.h to a wrapper

Message ID 1515490492-29434-6-git-send-email-yamada.masahiro@socionext.com
State New
Headers show
Series
  • [1/7] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Related show

Commit Message

Masahiro Yamada Jan. 9, 2018, 9:34 a.m.
Remove the tons of code duplication between include/libfdt.h and
sciprts/dtc/libfdt/libfdt.h.  I am keeping U-Boot local code in
include/libfdt.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 include/libfdt.h | 1856 +-----------------------------------------------------
 1 file changed, 8 insertions(+), 1848 deletions(-)

Comments

Simon Glass Jan. 16, 2018, 2:56 p.m. | #1
On 9 January 2018 at 01:34, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Remove the tons of code duplication between include/libfdt.h and
> sciprts/dtc/libfdt/libfdt.h.  I am keeping U-Boot local code in
> include/libfdt.h.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---
>
>  include/libfdt.h | 1856 +-----------------------------------------------------
>  1 file changed, 8 insertions(+), 1848 deletions(-)

Didn't you just add this file two patches ago? Why not just not add it?

Regards,
Simon
Masahiro Yamada Jan. 16, 2018, 3:41 p.m. | #2
2018-01-16 23:56 GMT+09:00 Simon Glass <sjg@chromium.org>:
> On 9 January 2018 at 01:34, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
>> Remove the tons of code duplication between include/libfdt.h and
>> sciprts/dtc/libfdt/libfdt.h.  I am keeping U-Boot local code in
>> include/libfdt.h.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> ---
>>
>>  include/libfdt.h | 1856 +-----------------------------------------------------
>>  1 file changed, 8 insertions(+), 1848 deletions(-)
>
> Didn't you just add this file two patches ago? Why not just not add it?
>

Well, a good question.

I tried to do one thing in each commit.

Two patches ago, I moved 2100 lines to this file.
Then, I deleted 1800 lines in this patch.

If I had merged them into one patch, I would have just needed
to move 300 lines.


I will take a look if you do not want to see the huge diffs twice.

Patch

diff --git a/include/libfdt.h b/include/libfdt.h
index 59da5bc..0979ad6 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -1,1858 +1,18 @@ 
-#ifndef _LIBFDT_H
-#define _LIBFDT_H
+#ifndef UBOOT_LIBFDT_H
+#define UBOOT_LIBFDT_H
 /*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
  * SPDX-License-Identifier:     GPL-2.0+ BSD-2-Clause
  */
 
-#include <libfdt_env.h>
-#include <fdt.h>
-
-#define FDT_FIRST_SUPPORTED_VERSION	0x10
-#define FDT_LAST_SUPPORTED_VERSION	0x11
-
-/* Error codes: informative error codes */
-#define FDT_ERR_NOTFOUND	1
-	/* FDT_ERR_NOTFOUND: The requested node or property does not exist */
-#define FDT_ERR_EXISTS		2
-	/* FDT_ERR_EXISTS: Attempted to create a node or property which
-	 * already exists */
-#define FDT_ERR_NOSPACE		3
-	/* FDT_ERR_NOSPACE: Operation needed to expand the device
-	 * tree, but its buffer did not have sufficient space to
-	 * contain the expanded tree. Use fdt_open_into() to move the
-	 * device tree to a buffer with more space. */
-
-/* Error codes: codes for bad parameters */
-#define FDT_ERR_BADOFFSET	4
-	/* FDT_ERR_BADOFFSET: Function was passed a structure block
-	 * offset which is out-of-bounds, or which points to an
-	 * unsuitable part of the structure for the operation. */
-#define FDT_ERR_BADPATH		5
-	/* FDT_ERR_BADPATH: Function was passed a badly formatted path
-	 * (e.g. missing a leading / for a function which requires an
-	 * absolute path) */
-#define FDT_ERR_BADPHANDLE	6
-	/* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle.
-	 * This can be caused either by an invalid phandle property
-	 * length, or the phandle value was either 0 or -1, which are
-	 * not permitted. */
-#define FDT_ERR_BADSTATE	7
-	/* FDT_ERR_BADSTATE: Function was passed an incomplete device
-	 * tree created by the sequential-write functions, which is
-	 * not sufficiently complete for the requested operation. */
-
-/* Error codes: codes for bad device tree blobs */
-#define FDT_ERR_TRUNCATED	8
-	/* FDT_ERR_TRUNCATED: Structure block of the given device tree
-	 * ends without an FDT_END tag. */
-#define FDT_ERR_BADMAGIC	9
-	/* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
-	 * device tree at all - it is missing the flattened device
-	 * tree magic number. */
-#define FDT_ERR_BADVERSION	10
-	/* FDT_ERR_BADVERSION: Given device tree has a version which
-	 * can't be handled by the requested operation.  For
-	 * read-write functions, this may mean that fdt_open_into() is
-	 * required to convert the tree to the expected version. */
-#define FDT_ERR_BADSTRUCTURE	11
-	/* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
-	 * structure block or other serious error (e.g. misnested
-	 * nodes, or subnodes preceding properties). */
-#define FDT_ERR_BADLAYOUT	12
-	/* FDT_ERR_BADLAYOUT: For read-write functions, the given
-	 * device tree has it's sub-blocks in an order that the
-	 * function can't handle (memory reserve map, then structure,
-	 * then strings).  Use fdt_open_into() to reorganize the tree
-	 * into a form suitable for the read-write operations. */
-
-/* "Can't happen" error indicating a bug in libfdt */
-#define FDT_ERR_INTERNAL	13
-	/* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
-	 * Should never be returned, if it is, it indicates a bug in
-	 * libfdt itself. */
-
-/* Errors in device tree content */
-#define FDT_ERR_BADNCELLS	14
-	/* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells
-	 * or similar property with a bad format or value */
-
-#define FDT_ERR_BADVALUE	15
-	/* FDT_ERR_BADVALUE: Device tree has a property with an unexpected
-	 * value. For example: a property expected to contain a string list
-	 * is not NUL-terminated within the length of its value. */
-
-#define FDT_ERR_BADOVERLAY	16
-	/* FDT_ERR_BADOVERLAY: The device tree overlay, while
-	 * correctly structured, cannot be applied due to some
-	 * unexpected or missing value, property or node. */
-
-#define FDT_ERR_NOPHANDLES	17
-	/* FDT_ERR_NOPHANDLES: The device tree doesn't have any
-	 * phandle available anymore without causing an overflow */
-
-#define FDT_ERR_MAX		17
-
-/**********************************************************************/
-/* Low-level functions (you probably don't need these)                */
-/**********************************************************************/
-
-#ifndef SWIG /* This function is not useful in Python */
-const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
-#endif
-static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
-{
-	return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
-}
-
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
-
-/**********************************************************************/
-/* Traversal functions                                                */
-/**********************************************************************/
-
-int fdt_next_node(const void *fdt, int offset, int *depth);
-
-/**
- * fdt_first_subnode() - get offset of first direct subnode
- *
- * @fdt:	FDT blob
- * @offset:	Offset of node to check
- * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
- */
-int fdt_first_subnode(const void *fdt, int offset);
-
-/**
- * fdt_next_subnode() - get offset of next direct subnode
- *
- * After first calling fdt_first_subnode(), call this function repeatedly to
- * get direct subnodes of a parent node.
- *
- * @fdt:	FDT blob
- * @offset:	Offset of previous subnode
- * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
- * subnodes
- */
-int fdt_next_subnode(const void *fdt, int offset);
-
-/**
- * fdt_for_each_subnode - iterate over all subnodes of a parent
- *
- * @node:	child node (int, lvalue)
- * @fdt:	FDT blob (const void *)
- * @parent:	parent node (int)
- *
- * This is actually a wrapper around a for loop and would be used like so:
- *
- *	fdt_for_each_subnode(node, fdt, parent) {
- *		Use node
- *		...
- *	}
- *
- *	if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) {
- *		Error handling
- *	}
- *
- * Note that this is implemented as a macro and @node is used as
- * iterator in the loop. The parent variable be constant or even a
- * literal.
- *
- */
-#define fdt_for_each_subnode(node, fdt, parent)		\
-	for (node = fdt_first_subnode(fdt, parent);	\
-	     node >= 0;					\
-	     node = fdt_next_subnode(fdt, node))
-
-/**********************************************************************/
-/* General functions                                                  */
-/**********************************************************************/
-#define fdt_get_header(fdt, field) \
-	(fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt)			(fdt_get_header(fdt, magic))
-#define fdt_totalsize(fdt)		(fdt_get_header(fdt, totalsize))
-#define fdt_off_dt_struct(fdt)		(fdt_get_header(fdt, off_dt_struct))
-#define fdt_off_dt_strings(fdt)		(fdt_get_header(fdt, off_dt_strings))
-#define fdt_off_mem_rsvmap(fdt)		(fdt_get_header(fdt, off_mem_rsvmap))
-#define fdt_version(fdt)		(fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt)	(fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt)	(fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt)	(fdt_get_header(fdt, size_dt_strings))
-#define fdt_size_dt_struct(fdt)		(fdt_get_header(fdt, size_dt_struct))
-
-#define __fdt_set_hdr(name) \
-	static inline void fdt_set_##name(void *fdt, uint32_t val) \
-	{ \
-		struct fdt_header *fdth = (struct fdt_header *)fdt; \
-		fdth->name = cpu_to_fdt32(val); \
-	}
-__fdt_set_hdr(magic);
-__fdt_set_hdr(totalsize);
-__fdt_set_hdr(off_dt_struct);
-__fdt_set_hdr(off_dt_strings);
-__fdt_set_hdr(off_mem_rsvmap);
-__fdt_set_hdr(version);
-__fdt_set_hdr(last_comp_version);
-__fdt_set_hdr(boot_cpuid_phys);
-__fdt_set_hdr(size_dt_strings);
-__fdt_set_hdr(size_dt_struct);
-#undef __fdt_set_hdr
-
-/**
- * fdt_check_header - sanity check a device tree or possible device tree
- * @fdt: pointer to data which might be a flattened device tree
- *
- * fdt_check_header() checks that the given buffer contains what
- * appears to be a flattened device tree with sane information in its
- * header.
- *
- * returns:
- *     0, if the buffer appears to contain a valid device tree
- *     -FDT_ERR_BADMAGIC,
- *     -FDT_ERR_BADVERSION,
- *     -FDT_ERR_BADSTATE, standard meanings, as above
- */
-int fdt_check_header(const void *fdt);
-
-/**
- * fdt_move - move a device tree around in memory
- * @fdt: pointer to the device tree to move
- * @buf: pointer to memory where the device is to be moved
- * @bufsize: size of the memory space at buf
- *
- * fdt_move() relocates, if possible, the device tree blob located at
- * fdt to the buffer at buf of size bufsize.  The buffer may overlap
- * with the existing device tree blob at fdt.  Therefore,
- *     fdt_move(fdt, fdt, fdt_totalsize(fdt))
- * should always succeed.
- *
- * returns:
- *     0, on success
- *     -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
- *     -FDT_ERR_BADMAGIC,
- *     -FDT_ERR_BADVERSION,
- *     -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_move(const void *fdt, void *buf, int bufsize);
-
-/**********************************************************************/
-/* Read-only functions                                                */
-/**********************************************************************/
-
-/**
- * fdt_string - retrieve a string from the strings block of a device tree
- * @fdt: pointer to the device tree blob
- * @stroffset: offset of the string within the strings block (native endian)
- *
- * fdt_string() retrieves a pointer to a single string from the
- * strings block of the device tree blob at fdt.
- *
- * returns:
- *     a pointer to the string, on success
- *     NULL, if stroffset is out of bounds
- */
-const char *fdt_string(const void *fdt, int stroffset);
-
-/**
- * fdt_get_max_phandle - retrieves the highest phandle in a tree
- * @fdt: pointer to the device tree blob
- *
- * fdt_get_max_phandle retrieves the highest phandle in the given
- * device tree. This will ignore badly formatted phandles, or phandles
- * with a value of 0 or -1.
- *
- * returns:
- *      the highest phandle on success
- *      0, if no phandle was found in the device tree
- *      -1, if an error occurred
- */
-uint32_t fdt_get_max_phandle(const void *fdt);
-
-/**
- * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
- * @fdt: pointer to the device tree blob
- *
- * Returns the number of entries in the device tree blob's memory
- * reservation map.  This does not include the terminating 0,0 entry
- * or any other (0,0) entries reserved for expansion.
- *
- * returns:
- *     the number of entries
- */
-int fdt_num_mem_rsv(const void *fdt);
-
-/**
- * fdt_get_mem_rsv - retrieve one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: pointers to 64-bit variables
- *
- * On success, *address and *size will contain the address and size of
- * the n-th reserve map entry from the device tree blob, in
- * native-endian format.
- *
- * returns:
- *     0, on success
- *     -FDT_ERR_BADMAGIC,
- *     -FDT_ERR_BADVERSION,
- *     -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
-
-/**
- * fdt_subnode_offset_namelen - find a subnode based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_subnode_offset(), but only examine the first
- * namelen characters of name for matching the subnode name.  This is
- * useful for finding subnodes based on a portion of a larger string,
- * such as a full path.
- */
-#ifndef SWIG /* Not available in Python */
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
-			       const char *name, int namelen);
-#endif
-/**
- * fdt_subnode_offset - find a subnode of a given node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_subnode_offset() finds a subnode of the node at structure block
- * offset parentoffset with the given name.  name may include a unit
- * address, in which case fdt_subnode_offset() will find the subnode
- * with that unit address, or the unit address may be omitted, in
- * which case fdt_subnode_offset() will find an arbitrary subnode
- * whose name excluding unit address matches the given name.
- *
- * returns:
- *	structure block offset of the requested subnode (>=0), on success
- *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
- *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
- *		tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_path_offset_namelen - find a tree node by its full path
- * @fdt: pointer to the device tree blob
- * @path: full path of the node to locate
- * @namelen: number of characters of path to consider
- *
- * Identical to fdt_path_offset(), but only consider the first namelen
- * characters of path as the path name.
- */
-#ifndef SWIG /* Not available in Python */
-int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen);
-#endif
-
-/**
- * fdt_path_offset - find a tree node by its full path
- * @fdt: pointer to the device tree blob
- * @path: full path of the node to locate
- *
- * fdt_path_offset() finds a node of a given path in the device tree.
- * Each path component may omit the unit address portion, but the
- * results of this are undefined if any such path component is
- * ambiguous (that is if there are multiple nodes at the relevant
- * level matching the given component, differentiated only by unit
- * address).
- *
- * returns:
- *	structure block offset of the node with the requested path (>=0), on
- *		success
- *	-FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
- *	-FDT_ERR_NOTFOUND, if the requested node does not exist
- *      -FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_path_offset(const void *fdt, const char *path);
-
-/**
- * fdt_get_name - retrieve the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the starting node
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_name() retrieves the name (including unit address) of the
- * device tree node at structure block offset nodeoffset.  If lenp is
- * non-NULL, the length of this name is also returned, in the integer
- * pointed to by lenp.
- *
- * returns:
- *	pointer to the node's name, on success
- *		If lenp is non-NULL, *lenp contains the length of that name
- *			(>=0)
- *	NULL, on error
- *		if lenp is non-NULL *lenp contains an error code (<0):
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
- *			tag
- *		-FDT_ERR_BADMAGIC,
- *		-FDT_ERR_BADVERSION,
- *		-FDT_ERR_BADSTATE, standard meanings
- */
-const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
-
-/**
- * fdt_first_property_offset - find the offset of a node's first property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of a node
- *
- * fdt_first_property_offset() finds the first property of the node at
- * the given structure block offset.
- *
- * returns:
- *	structure block offset of the property (>=0), on success
- *	-FDT_ERR_NOTFOUND, if the requested node has no properties
- *	-FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag
- *      -FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_first_property_offset(const void *fdt, int nodeoffset);
-
-/**
- * fdt_next_property_offset - step through a node's properties
- * @fdt: pointer to the device tree blob
- * @offset: structure block offset of a property
- *
- * fdt_next_property_offset() finds the property immediately after the
- * one at the given structure block offset.  This will be a property
- * of the same node as the given property.
- *
- * returns:
- *	structure block offset of the next property (>=0), on success
- *	-FDT_ERR_NOTFOUND, if the given property is the last in its node
- *	-FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag
- *      -FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_next_property_offset(const void *fdt, int offset);
-
-/**
- * fdt_for_each_property_offset - iterate over all properties of a node
- *
- * @property_offset:	property offset (int, lvalue)
- * @fdt:		FDT blob (const void *)
- * @node:		node offset (int)
- *
- * This is actually a wrapper around a for loop and would be used like so:
- *
- *	fdt_for_each_property_offset(property, fdt, node) {
- *		Use property
- *		...
- *	}
- *
- *	if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) {
- *		Error handling
- *	}
- *
- * Note that this is implemented as a macro and property is used as
- * iterator in the loop. The node variable can be constant or even a
- * literal.
- */
-#define fdt_for_each_property_offset(property, fdt, node)	\
-	for (property = fdt_first_property_offset(fdt, node);	\
-	     property >= 0;					\
-	     property = fdt_next_property_offset(fdt, property))
-
-/**
- * fdt_get_property_by_offset - retrieve the property at a given offset
- * @fdt: pointer to the device tree blob
- * @offset: offset of the property to retrieve
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_property_by_offset() retrieves a pointer to the
- * fdt_property structure within the device tree blob at the given
- * offset.  If lenp is non-NULL, the length of the property value is
- * also returned, in the integer pointed to by lenp.
- *
- * returns:
- *	pointer to the structure representing the property
- *		if lenp is non-NULL, *lenp contains the length of the property
- *		value (>=0)
- *	NULL, on error
- *		if lenp is non-NULL, *lenp contains an error code (<0):
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
- *		-FDT_ERR_BADMAGIC,
- *		-FDT_ERR_BADVERSION,
- *		-FDT_ERR_BADSTATE,
- *		-FDT_ERR_BADSTRUCTURE,
- *		-FDT_ERR_TRUNCATED, standard meanings
- */
-const struct fdt_property *fdt_get_property_by_offset(const void *fdt,
-						      int offset,
-						      int *lenp);
-
-/**
- * fdt_get_property_namelen - find a property based on substring
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @namelen: number of characters of name to consider
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * Identical to fdt_get_property(), but only examine the first namelen
- * characters of name for matching the property name.
- */
-#ifndef SWIG /* Not available in Python */
-const struct fdt_property *fdt_get_property_namelen(const void *fdt,
-						    int nodeoffset,
-						    const char *name,
-						    int namelen, int *lenp);
-#endif
-
-/**
- * fdt_get_property - find a given property in a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_property() retrieves a pointer to the fdt_property
- * structure within the device tree blob corresponding to the property
- * named 'name' of the node at offset nodeoffset.  If lenp is
- * non-NULL, the length of the property value is also returned, in the
- * integer pointed to by lenp.
- *
- * returns:
- *	pointer to the structure representing the property
- *		if lenp is non-NULL, *lenp contains the length of the property
- *		value (>=0)
- *	NULL, on error
- *		if lenp is non-NULL, *lenp contains an error code (<0):
- *		-FDT_ERR_NOTFOUND, node does not have named property
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
- *			tag
- *		-FDT_ERR_BADMAGIC,
- *		-FDT_ERR_BADVERSION,
- *		-FDT_ERR_BADSTATE,
- *		-FDT_ERR_BADSTRUCTURE,
- *		-FDT_ERR_TRUNCATED, standard meanings
- */
-const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
-					    const char *name, int *lenp);
-static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
-						      const char *name,
-						      int *lenp)
-{
-	return (struct fdt_property *)(uintptr_t)
-		fdt_get_property(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_getprop_by_offset - retrieve the value of a property at a given offset
- * @fdt: pointer to the device tree blob
- * @ffset: offset of the property to read
- * @namep: pointer to a string variable (will be overwritten) or NULL
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_getprop_by_offset() retrieves a pointer to the value of the
- * property at structure block offset 'offset' (this will be a pointer
- * to within the device blob itself, not a copy of the value).  If
- * lenp is non-NULL, the length of the property value is also
- * returned, in the integer pointed to by lenp.  If namep is non-NULL,
- * the property's namne will also be returned in the char * pointed to
- * by namep (this will be a pointer to within the device tree's string
- * block, not a new copy of the name).
- *
- * returns:
- *	pointer to the property's value
- *		if lenp is non-NULL, *lenp contains the length of the property
- *		value (>=0)
- *		if namep is non-NULL *namep contiains a pointer to the property
- *		name.
- *	NULL, on error
- *		if lenp is non-NULL, *lenp contains an error code (<0):
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag
- *		-FDT_ERR_BADMAGIC,
- *		-FDT_ERR_BADVERSION,
- *		-FDT_ERR_BADSTATE,
- *		-FDT_ERR_BADSTRUCTURE,
- *		-FDT_ERR_TRUNCATED, standard meanings
- */
-#ifndef SWIG /* This function is not useful in Python */
-const void *fdt_getprop_by_offset(const void *fdt, int offset,
-				  const char **namep, int *lenp);
-#endif
-
-/**
- * fdt_getprop_namelen - get property value based on substring
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @namelen: number of characters of name to consider
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * Identical to fdt_getprop(), but only examine the first namelen
- * characters of name for matching the property name.
- */
-#ifndef SWIG /* Not available in Python */
-const void *fdt_getprop_namelen(const void *fdt, int nodeoffset,
-				const char *name, int namelen, int *lenp);
-static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset,
-					  const char *name, int namelen,
-					  int *lenp)
-{
-	return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name,
-						      namelen, lenp);
-}
-#endif
-
-/**
- * fdt_getprop - retrieve the value of a given property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_getprop() retrieves a pointer to the value of the property
- * named 'name' of the node at offset nodeoffset (this will be a
- * pointer to within the device blob itself, not a copy of the value).
- * If lenp is non-NULL, the length of the property value is also
- * returned, in the integer pointed to by lenp.
- *
- * returns:
- *	pointer to the property's value
- *		if lenp is non-NULL, *lenp contains the length of the property
- *		value (>=0)
- *	NULL, on error
- *		if lenp is non-NULL, *lenp contains an error code (<0):
- *		-FDT_ERR_NOTFOUND, node does not have named property
- *		-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE
- *			tag
- *		-FDT_ERR_BADMAGIC,
- *		-FDT_ERR_BADVERSION,
- *		-FDT_ERR_BADSTATE,
- *		-FDT_ERR_BADSTRUCTURE,
- *		-FDT_ERR_TRUNCATED, standard meanings
- */
-const void *fdt_getprop(const void *fdt, int nodeoffset,
-			const char *name, int *lenp);
-static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
-				  const char *name, int *lenp)
-{
-	return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_get_phandle - retrieve the phandle of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the node
- *
- * fdt_get_phandle() retrieves the phandle of the device tree node at
- * structure block offset nodeoffset.
- *
- * returns:
- *	the phandle of the node at nodeoffset, on success (!= 0, != -1)
- *	0, if the node has no phandle, or another error occurs
- */
-uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
-
-/**
- * fdt_get_alias_namelen - get alias based on substring
- * @fdt: pointer to the device tree blob
- * @name: name of the alias th look up
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_get_alias(), but only examine the first namelen
- * characters of name for matching the alias name.
- */
-#ifndef SWIG /* Not available in Python */
-const char *fdt_get_alias_namelen(const void *fdt,
-				  const char *name, int namelen);
-#endif
-
-/**
- * fdt_get_alias - retrieve the path referenced by a given alias
- * @fdt: pointer to the device tree blob
- * @name: name of the alias th look up
- *
- * fdt_get_alias() retrieves the value of a given alias.  That is, the
- * value of the property named 'name' in the node /aliases.
- *
- * returns:
- *	a pointer to the expansion of the alias named 'name', if it exists
- *	NULL, if the given alias or the /aliases node does not exist
- */
-const char *fdt_get_alias(const void *fdt, const char *name);
-
-/**
- * fdt_get_path - determine the full path of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose path to find
- * @buf: character buffer to contain the returned path (will be overwritten)
- * @buflen: size of the character buffer at buf
- *
- * fdt_get_path() computes the full path of the node at offset
- * nodeoffset, and records that path in the buffer at buf.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- *	0, on success
- *		buf contains the absolute path of the node at
- *		nodeoffset, as a NUL-terminated string.
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
- *		characters and will not fit in the given buffer.
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
-
-/**
- * fdt_supernode_atdepth_offset - find a specific ancestor of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- * @supernodedepth: depth of the ancestor to find
- * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_supernode_atdepth_offset() finds an ancestor of the given node
- * at a specific depth from the root (where the root itself has depth
- * 0, its immediate subnodes depth 1 and so forth).  So
- *	fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
- * will always return 0, the offset of the root node.  If the node at
- * nodeoffset has depth D, then:
- *	fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
- * will return nodeoffset itself.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- *	structure block offset of the node at node offset's ancestor
- *		of depth supernodedepth (>=0), on success
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of
- *		nodeoffset
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
-				 int supernodedepth, int *nodedepth);
-
-/**
- * fdt_node_depth - find the depth of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_node_depth() finds the depth of a given node.  The root node
- * has depth 0, its immediate subnodes depth 1 and so forth.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- *	depth of the node at nodeoffset (>=0), on success
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_depth(const void *fdt, int nodeoffset);
-
-/**
- * fdt_parent_offset - find the parent of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_parent_offset() locates the parent node of a given node (that
- * is, it finds the offset of the node which contains the node at
- * nodeoffset as a subnode).
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset, *twice*.
- *
- * returns:
- *	structure block offset of the parent of the node at nodeoffset
- *		(>=0), on success
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_parent_offset(const void *fdt, int nodeoffset);
-
-/**
- * fdt_node_offset_by_prop_value - find nodes with a given property value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @propname: property name to check
- * @propval: property value to search for
- * @proplen: length of the value in propval
- *
- * fdt_node_offset_by_prop_value() returns the offset of the first
- * node after startoffset, which has a property named propname whose
- * value is of length proplen and has value equal to propval; or if
- * startoffset is -1, the very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- *	offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
- *					       propval, proplen);
- *	while (offset != -FDT_ERR_NOTFOUND) {
- *		// other code here
- *		offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
- *						       propval, proplen);
- *	}
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- *	structure block offset of the located node (>= 0, >startoffset),
- *		 on success
- *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- *		tree after startoffset
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
-				  const char *propname,
-				  const void *propval, int proplen);
-
-/**
- * fdt_node_offset_by_phandle - find the node with a given phandle
- * @fdt: pointer to the device tree blob
- * @phandle: phandle value
- *
- * fdt_node_offset_by_phandle() returns the offset of the node
- * which has the given phandle value.  If there is more than one node
- * in the tree with the given phandle (an invalid tree), results are
- * undefined.
- *
- * returns:
- *	structure block offset of the located node (>= 0), on success
- *	-FDT_ERR_NOTFOUND, no node with that phandle exists
- *	-FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
-
-/**
- * fdt_node_check_compatible: check a node's compatible property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @compatible: string to match against
- *
- *
- * fdt_node_check_compatible() returns 0 if the given node contains a
- * 'compatible' property with the given string as one of its elements,
- * it returns non-zero otherwise, or on error.
- *
- * returns:
- *	0, if the node has a 'compatible' property listing the given string
- *	1, if the node has a 'compatible' property, but it does not list
- *		the given string
- *	-FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
- *	-FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_check_compatible(const void *fdt, int nodeoffset,
-			      const char *compatible);
-
-/**
- * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @compatible: 'compatible' string to match against
- *
- * fdt_node_offset_by_compatible() returns the offset of the first
- * node after startoffset, which has a 'compatible' property which
- * lists the given compatible string; or if startoffset is -1, the
- * very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- *	offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
- *	while (offset != -FDT_ERR_NOTFOUND) {
- *		// other code here
- *		offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
- *	}
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- *	structure block offset of the located node (>= 0, >startoffset),
- *		 on success
- *	-FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- *		tree after startoffset
- *	-FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
-				  const char *compatible);
-
-/**
- * fdt_stringlist_contains - check a string list property for a string
- * @strlist: Property containing a list of strings to check
- * @listlen: Length of property
- * @str: String to search for
- *
- * This is a utility function provided for convenience. The list contains
- * one or more strings, each terminated by \0, as is found in a device tree
- * "compatible" property.
- *
- * @return: 1 if the string is found in the list, 0 not found, or invalid list
- */
-int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
-
-/**
- * fdt_stringlist_count - count the number of strings in a string list
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @property: name of the property containing the string list
- * @return:
- *   the number of strings in the given property
- *   -FDT_ERR_BADVALUE if the property value is not NUL-terminated
- *   -FDT_ERR_NOTFOUND if the property does not exist
- */
-int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property);
-
-/**
- * fdt_stringlist_search - find a string in a string list and return its index
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @property: name of the property containing the string list
- * @string: string to look up in the string list
- *
- * Note that it is possible for this function to succeed on property values
- * that are not NUL-terminated. That's because the function will stop after
- * finding the first occurrence of @string. This can for example happen with
- * small-valued cell properties, such as #address-cells, when searching for
- * the empty string.
- *
- * @return:
- *   the index of the string in the list of strings
- *   -FDT_ERR_BADVALUE if the property value is not NUL-terminated
- *   -FDT_ERR_NOTFOUND if the property does not exist or does not contain
- *                     the given string
- */
-int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property,
-			  const char *string);
-
-/**
- * fdt_stringlist_get() - obtain the string at a given index in a string list
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @property: name of the property containing the string list
- * @index: index of the string to return
- * @lenp: return location for the string length or an error code on failure
- *
- * Note that this will successfully extract strings from properties with
- * non-NUL-terminated values. For example on small-valued cell properties
- * this function will return the empty string.
- *
- * If non-NULL, the length of the string (on success) or a negative error-code
- * (on failure) will be stored in the integer pointer to by lenp.
- *
- * @return:
- *   A pointer to the string at the given index in the string list or NULL on
- *   failure. On success the length of the string will be stored in the memory
- *   location pointed to by the lenp parameter, if non-NULL. On failure one of
- *   the following negative error codes will be returned in the lenp parameter
- *   (if non-NULL):
- *     -FDT_ERR_BADVALUE if the property value is not NUL-terminated
- *     -FDT_ERR_NOTFOUND if the property does not exist
- */
-const char *fdt_stringlist_get(const void *fdt, int nodeoffset,
-			       const char *property, int index,
-			       int *lenp);
-
-/**********************************************************************/
-/* Read-only functions (addressing related)                           */
-/**********************************************************************/
-
-/**
- * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells
- *
- * This is the maximum value for #address-cells, #size-cells and
- * similar properties that will be processed by libfdt.  IEE1275
- * requires that OF implementations handle values up to 4.
- * Implementations may support larger values, but in practice higher
- * values aren't used.
- */
-#define FDT_MAX_NCELLS		4
-
-/**
- * fdt_address_cells - retrieve address size for a bus represented in the tree
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to find the address size for
- *
- * When the node has a valid #address-cells property, returns its value.
- *
- * returns:
- *	0 <= n < FDT_MAX_NCELLS, on success
- *      2, if the node has no #address-cells property
- *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
- *		#address-cells property
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_address_cells(const void *fdt, int nodeoffset);
-
-/**
- * fdt_size_cells - retrieve address range size for a bus represented in the
- *                  tree
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to find the address range size for
- *
- * When the node has a valid #size-cells property, returns its value.
- *
- * returns:
- *	0 <= n < FDT_MAX_NCELLS, on success
- *      2, if the node has no #address-cells property
- *      -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid
- *		#size-cells property
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_size_cells(const void *fdt, int nodeoffset);
-
-
-/**********************************************************************/
-/* Write-in-place functions                                           */
-/**********************************************************************/
-
-/**
- * fdt_setprop_inplace_namelen_partial - change a property's value,
- *                                       but not its size
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @namelen: number of characters of name to consider
- * @idx: index of the property to change in the array
- * @val: pointer to data to replace the property value with
- * @len: length of the property value
- *
- * Identical to fdt_setprop_inplace(), but modifies the given property
- * starting from the given index, and using only the first characters
- * of the name. It is useful when you want to manipulate only one value of
- * an array and you have a string that doesn't end with \0.
- */
-#ifndef SWIG /* Not available in Python */
-int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset,
-					const char *name, int namelen,
-					uint32_t idx, const void *val,
-					int len);
-#endif
-
-/**
- * fdt_setprop_inplace - change a property's value, but not its size
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to replace the property value with
- * @len: length of the property value
- *
- * fdt_setprop_inplace() replaces the value of a given property with
- * the data in val, of length len.  This function cannot change the
- * size of a property, and so will only work if len is equal to the
- * current length of the property.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, if len is not equal to the property's current length
- *	-FDT_ERR_NOTFOUND, node does not have the named property
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-#ifndef SWIG /* Not available in Python */
-int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
-			const void *val, int len);
-#endif
-
-/**
- * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 32-bit integer value to replace the property with
- *
- * fdt_setprop_inplace_u32() replaces the value of a given property
- * with the 32-bit integer value in val, converting val to big-endian
- * if necessary.  This function cannot change the size of a property,
- * and so will only work if the property already exists and has length
- * 4.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, if the property's length is not equal to 4
- *	-FDT_ERR_NOTFOUND, node does not have the named property
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
-					  const char *name, uint32_t val)
-{
-	fdt32_t tmp = cpu_to_fdt32(val);
-	return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 64-bit integer value to replace the property with
- *
- * fdt_setprop_inplace_u64() replaces the value of a given property
- * with the 64-bit integer value in val, converting val to big-endian
- * if necessary.  This function cannot change the size of a property,
- * and so will only work if the property already exists and has length
- * 8.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, if the property's length is not equal to 8
- *	-FDT_ERR_NOTFOUND, node does not have the named property
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
-					  const char *name, uint64_t val)
-{
-	fdt64_t tmp = cpu_to_fdt64(val);
-	return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_setprop_inplace_cell - change the value of a single-cell property
- *
- * This is an alternative name for fdt_setprop_inplace_u32()
- */
-static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
-					   const char *name, uint32_t val)
-{
-	return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
-}
-
-/**
- * fdt_nop_property - replace a property with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_nop_property() will replace a given property's representation
- * in the blob with FDT_NOP tags, effectively removing it from the
- * tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the property, and will not alter or move any other part of the
- * tree.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOTFOUND, node does not have the named property
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_nop_node - replace a node (subtree) with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_nop_node() will replace a given node's representation in the
- * blob, including all its subnodes, if any, with FDT_NOP tags,
- * effectively removing it from the tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the node and its properties and subnodes, and will not alter or
- * move any other part of the tree.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_node(void *fdt, int nodeoffset);
-
-/**********************************************************************/
-/* Sequential write functions                                         */
-/**********************************************************************/
-
-int fdt_create(void *buf, int bufsize);
-int fdt_resize(void *fdt, void *buf, int bufsize);
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
-int fdt_finish_reservemap(void *fdt);
-int fdt_begin_node(void *fdt, const char *name);
-int fdt_property(void *fdt, const char *name, const void *val, int len);
-static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
-{
-	fdt32_t tmp = cpu_to_fdt32(val);
-	return fdt_property(fdt, name, &tmp, sizeof(tmp));
-}
-static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
-{
-	fdt64_t tmp = cpu_to_fdt64(val);
-	return fdt_property(fdt, name, &tmp, sizeof(tmp));
-}
-static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
-{
-	return fdt_property_u32(fdt, name, val);
-}
-
-/**
- * fdt_property_placeholder - add a new property and return a ptr to its value
- *
- * @fdt: pointer to the device tree blob
- * @name: name of property to add
- * @len: length of property value in bytes
- * @valp: returns a pointer to where where the value should be placed
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_NOSPACE, standard meanings
- */
-int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp);
-
-#define fdt_property_string(fdt, name, str) \
-	fdt_property(fdt, name, str, strlen(str)+1)
-int fdt_end_node(void *fdt);
-int fdt_finish(void *fdt);
-
-/**********************************************************************/
-/* Read-write functions                                               */
-/**********************************************************************/
-
-int fdt_create_empty_tree(void *buf, int bufsize);
-int fdt_open_into(const void *fdt, void *buf, int bufsize);
-int fdt_pack(void *fdt);
-
-/**
- * fdt_add_mem_rsv - add one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: 64-bit values (native endian)
- *
- * Adds a reserve map entry to the given blob reserving a region at
- * address address of length size.
- *
- * This function will insert data into the reserve map and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new reservation entry
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
-
-/**
- * fdt_del_mem_rsv - remove a memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @n: entry to remove
- *
- * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
- * the blob.
- *
- * This function will delete data from the reservation table and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
- *		are less than n+1 reserve map entries)
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_mem_rsv(void *fdt, int n);
-
-/**
- * fdt_set_name - change the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of a node
- * @name: name to give the node
- *
- * fdt_set_name() replaces the name (including unit address, if any)
- * of the given node with the given string.  NOTE: this function can't
- * efficiently check if the new name is unique amongst the given
- * node's siblings; results are undefined if this function is invoked
- * with a name equal to one of the given node's siblings.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob
- *		to contain the new name
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_set_name(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_setprop - create or change a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to set the property value to
- * @len: length of the property value
- *
- * fdt_setprop() sets the value of the named property in the given
- * node to the given value and length, creating the property if it
- * does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
-		const void *val, int len);
-
-/**
- * fdt_setprop _placeholder - allocate space for a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @len: length of the property value
- * @prop_data: return pointer to property data
- *
- * fdt_setprop_placeholer() allocates the named property in the given node.
- * If the property exists it is resized. In either case a pointer to the
- * property data is returned.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name,
-			    int len, void **prop_data);
-
-/**
- * fdt_setprop_u32 - set a property to a 32-bit integer
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 32-bit integer value for the property (native endian)
- *
- * fdt_setprop_u32() sets the value of the named property in the given
- * node to the given 32-bit integer value (converting to big-endian if
- * necessary), or creates a new property with that value if it does
- * not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
-				  uint32_t val)
-{
-	fdt32_t tmp = cpu_to_fdt32(val);
-	return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_setprop_u64 - set a property to a 64-bit integer
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 64-bit integer value for the property (native endian)
- *
- * fdt_setprop_u64() sets the value of the named property in the given
- * node to the given 64-bit integer value (converting to big-endian if
- * necessary), or creates a new property with that value if it does
- * not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
-				  uint64_t val)
-{
-	fdt64_t tmp = cpu_to_fdt64(val);
-	return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_setprop_cell - set a property to a single cell value
- *
- * This is an alternative name for fdt_setprop_u32()
- */
-static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
-				   uint32_t val)
-{
-	return fdt_setprop_u32(fdt, nodeoffset, name, val);
-}
-
-/**
- * fdt_setprop_string - set a property to a string value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @str: string value for the property
- *
- * fdt_setprop_string() sets the value of the named property in the
- * given node to the given string value (using the length of the
- * string to determine the new length of the property), or creates a
- * new property with that value if it does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-#define fdt_setprop_string(fdt, nodeoffset, name, str) \
-	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
-
-
-/**
- * fdt_setprop_empty - set a property to an empty value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- *
- * fdt_setprop_empty() sets the value of the named property in the
- * given node to an empty (zero length) value, or creates a new empty
- * property if it does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-#define fdt_setprop_empty(fdt, nodeoffset, name) \
-	fdt_setprop((fdt), (nodeoffset), (name), NULL, 0)
-
-/**
- * fdt_appendprop - append to or create a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to append to
- * @val: pointer to data to append to the property value
- * @len: length of the data to append to the property value
- *
- * fdt_appendprop() appends the value to the named property in the
- * given node, creating the property if it does not already exist.
- *
- * This function may insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
-		   const void *val, int len);
-
-/**
- * fdt_appendprop_u32 - append a 32-bit integer value to a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 32-bit integer value to append to the property (native endian)
- *
- * fdt_appendprop_u32() appends the given 32-bit integer value
- * (converting to big-endian if necessary) to the value of the named
- * property in the given node, or creates a new property with that
- * value if it does not already exist.
- *
- * This function may insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
-				     const char *name, uint32_t val)
-{
-	fdt32_t tmp = cpu_to_fdt32(val);
-	return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_appendprop_u64 - append a 64-bit integer value to a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 64-bit integer value to append to the property (native endian)
- *
- * fdt_appendprop_u64() appends the given 64-bit integer value
- * (converting to big-endian if necessary) to the value of the named
- * property in the given node, or creates a new property with that
- * value if it does not already exist.
- *
- * This function may insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
-				     const char *name, uint64_t val)
-{
-	fdt64_t tmp = cpu_to_fdt64(val);
-	return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-/**
- * fdt_appendprop_cell - append a single cell value to a property
- *
- * This is an alternative name for fdt_appendprop_u32()
- */
-static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
-				      const char *name, uint32_t val)
-{
-	return fdt_appendprop_u32(fdt, nodeoffset, name, val);
-}
-
-/**
- * fdt_appendprop_string - append a string to a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @str: string value to append to the property
- *
- * fdt_appendprop_string() appends the given string to the value of
- * the named property in the given node, or creates a new property
- * with that value if it does not already exist.
- *
- * This function may insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- *		contain the new property value
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
-	fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
-
-/**
- * fdt_delprop - delete a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_del_property() will delete the given property.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOTFOUND, node does not have the named property
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_delprop(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_add_subnode_namelen - creates a new node based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_add_subnode(), but use only the first namelen
- * characters of name as the name of the new node.  This is useful for
- * creating subnodes based on a portion of a larger string, such as a
- * full path.
- */
-#ifndef SWIG /* Not available in Python */
-int fdt_add_subnode_namelen(void *fdt, int parentoffset,
-			    const char *name, int namelen);
+#ifdef USE_HOSTCC
+#include "../scripts/dtc/libfdt/libfdt.h"
+#else
+#include <linux/libfdt.h>
 #endif
 
-/**
- * fdt_add_subnode - creates a new node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_add_subnode() creates a new node as a subnode of the node at
- * structure block offset parentoffset, with the given name (which
- * should include the unit address, if any).
- *
- * This function will insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
-
- * returns:
- *	structure block offset of the created nodeequested subnode (>=0), on
- *		success
- *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
- *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE
- *		tag
- *	-FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
- *		the given name
- *	-FDT_ERR_NOSPACE, if there is insufficient free space in the
- *		blob to contain the new node
- *	-FDT_ERR_NOSPACE
- *	-FDT_ERR_BADLAYOUT
- *      -FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_del_node - delete a node (subtree)
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_del_node() will remove the given node, including all its
- * subnodes if any, from the blob.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_node(void *fdt, int nodeoffset);
-
-/**
- * fdt_overlay_apply - Applies a DT overlay on a base DT
- * @fdt: pointer to the base device tree blob
- * @fdto: pointer to the device tree overlay blob
- *
- * fdt_overlay_apply() will apply the given device tree overlay on the
- * given base device tree.
- *
- * Expect the base device tree to be modified, even if the function
- * returns an error.
- *
- * returns:
- *	0, on success
- *	-FDT_ERR_NOSPACE, there's not enough space in the base device tree
- *	-FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or
- *		properties in the base DT
- *	-FDT_ERR_BADPHANDLE,
- *	-FDT_ERR_BADOVERLAY,
- *	-FDT_ERR_NOPHANDLES,
- *	-FDT_ERR_INTERNAL,
- *	-FDT_ERR_BADLAYOUT,
- *	-FDT_ERR_BADMAGIC,
- *	-FDT_ERR_BADOFFSET,
- *	-FDT_ERR_BADPATH,
- *	-FDT_ERR_BADVERSION,
- *	-FDT_ERR_BADSTRUCTURE,
- *	-FDT_ERR_BADSTATE,
- *	-FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_overlay_apply(void *fdt, void *fdto);
-
-/**********************************************************************/
-/* Debugging / informational functions                                */
-/**********************************************************************/
+/* U-Boot local hacks */
 
 #ifndef SWIG /* Not available in Python */
-const char *fdt_strerror(int errval);
-
 struct fdt_region {
 	int offset;
 	int size;
@@ -2155,4 +315,4 @@  extern struct fdt_header *working_fdt;  /* Pointer to the working fdt */
 /* adding a ramdisk needs 0x44 bytes in version 2008.10 */
 #define FDT_RAMDISK_OVERHEAD	0x80
 
-#endif /* _LIBFDT_H */
+#endif /* UBOOT_LIBFDT_H */