diff mbox

regulator: core: Update regulator_is_supported_voltage for fixed voltages

Message ID 1352458309-18141-1-git-send-email-tushar.behera@linaro.org
State Rejected
Headers show

Commit Message

Tushar Behera Nov. 9, 2012, 10:51 a.m. UTC
Commit c5f3939b8fe0 ("regulator: core: Support fixed voltages in
regulator_is_supported_voltage()") adds support for fixed regulators
in regulator_is_supported_voltage.

In case of fixed regulators for which voltage cannot be changed,
regulator_is_supported_voltage should return success only if the
min_uV and max_uV parameters are same and it is equal to the current
voltage of the regulator.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---

Currently this patch breaks MMC support for boards on which vmmc is a
fixed regulator and the voltage is not equal to either of 3.3v, 3.0v
or 1.8v. Earlier it used to work if the voltage was less than 3.3v.

 drivers/regulator/core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Mark Brown Nov. 9, 2012, 5:09 p.m. UTC | #1
On Fri, Nov 09, 2012 at 04:21:49PM +0530, Tushar Behera wrote:

> In case of fixed regulators for which voltage cannot be changed,
> regulator_is_supported_voltage should return success only if the
> min_uV and max_uV parameters are same and it is equal to the current
> voltage of the regulator.

This makes no sense to me at all.  The caller is asking if it's possible
to set the voltage between the minimum and maximum values, any voltage
in that range should be OK.  Your patch makes the function massively
less useful.

> Currently this patch breaks MMC support for boards on which vmmc is a
> fixed regulator and the voltage is not equal to either of 3.3v, 3.0v
> or 1.8v. Earlier it used to work if the voltage was less than 3.3v.

This sounds like a problem in the MMC framework.  If it's happy with
non-standard voltages it should be happy with non-standard voltages,
or perhaps it should be ignoring voltages if it can't find any sane
voltages at all.  The regulator framework is accurately answering the
question it was asked.

It also seems like the MMC framework will be broken by a regulator which
can change voltage but not over the full range the MMC framework is
interested in, this is essentially just a special case of that situation.
diff mbox

Patch

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1a35251..4a377a7 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1974,7 +1974,7 @@  int regulator_is_supported_voltage(struct regulator *regulator,
 	if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
 		ret = regulator_get_voltage(regulator);
 		if (ret >= 0)
-			return (min_uV >= ret && ret <= max_uV);
+			return (ret == min_uV && ret == max_uV);
 		else
 			return ret;
 	}