Applied "ASoC: support ROHM BD28623 codec" to the asoc tree

Message ID E1eqzZ1-0005DV-Rw@debutante
State Accepted
Commit f6d4b052175d84c6f2b73e884f3ab8c83c5f4d45
Headers show
Series
  • Applied "ASoC: support ROHM BD28623 codec" to the asoc tree
Related show

Commit Message

Mark Brown Feb. 28, 2018, 11:06 a.m.
The patch

   ASoC: support ROHM BD28623 codec

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From f6d4b052175d84c6f2b73e884f3ab8c83c5f4d45 Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>

Date: Fri, 23 Feb 2018 10:17:17 +0900
Subject: [PATCH] ASoC: support ROHM BD28623 codec

This patch adds support of the ROHM BD28623MUV
Class D speaker amplifier for Flat-panel TVs.
This IC delivers an output power of 20W + 20W.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>

Signed-off-by: Mark Brown <broonie@kernel.org>

---
 sound/soc/codecs/Kconfig   |   8 ++
 sound/soc/codecs/Makefile  |   2 +
 sound/soc/codecs/bd28623.c | 242 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 252 insertions(+)
 create mode 100644 sound/soc/codecs/bd28623.c

-- 
2.16.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 2b331f7266ab..4545f8fde220 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -45,6 +45,7 @@  config SND_SOC_ALL_CODECS
 	select SND_SOC_ALC5623 if I2C
 	select SND_SOC_ALC5632 if I2C
 	select SND_SOC_BT_SCO
+	select SND_SOC_BD28623
 	select SND_SOC_CQ0093VC
 	select SND_SOC_CS35L32 if I2C
 	select SND_SOC_CS35L33 if I2C
@@ -405,6 +406,13 @@  config SND_SOC_ALC5623
 config SND_SOC_ALC5632
 	tristate
 
+config SND_SOC_BD28623
+	tristate "ROHM BD28623 CODEC"
+	help
+	  Enable support for ROHM BD28623MUV Class D speaker amplifier.
+	  This codec does not have any control buses such as I2C, it
+	  detect format of I2S automatically.
+
 config SND_SOC_BT_SCO
 	tristate "Dummy BT SCO codec driver"
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index da1571336f1e..6df2fb32fc7e 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -35,6 +35,7 @@  snd-soc-ak4642-objs := ak4642.o
 snd-soc-ak4671-objs := ak4671.o
 snd-soc-ak5386-objs := ak5386.o
 snd-soc-arizona-objs := arizona.o
+snd-soc-bd28623-objs := bd28623.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-cq93vc-objs := cq93vc.o
 snd-soc-cs35l32-objs := cs35l32.o
@@ -280,6 +281,7 @@  obj-$(CONFIG_SND_SOC_AK5386)	+= snd-soc-ak5386.o
 obj-$(CONFIG_SND_SOC_ALC5623)    += snd-soc-alc5623.o
 obj-$(CONFIG_SND_SOC_ALC5632)	+= snd-soc-alc5632.o
 obj-$(CONFIG_SND_SOC_ARIZONA)	+= snd-soc-arizona.o
+obj-$(CONFIG_SND_SOC_BD28623)	+= snd-soc-bd28623.o
 obj-$(CONFIG_SND_SOC_BT_SCO)	+= snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
 obj-$(CONFIG_SND_SOC_CS35L32)	+= snd-soc-cs35l32.o
diff --git a/sound/soc/codecs/bd28623.c b/sound/soc/codecs/bd28623.c
new file mode 100644
index 000000000000..31904ef5c88b
--- /dev/null
+++ b/sound/soc/codecs/bd28623.c
@@ -0,0 +1,242 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// ROHM BD28623MUV class D speaker amplifier codec driver.
+//
+// Copyright (c) 2018 Socionext Inc.
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#define BD28623_NUM_SUPPLIES    3
+
+static const char *const bd28623_supply_names[BD28623_NUM_SUPPLIES] = {
+	"VCCA",
+	"VCCP1",
+	"VCCP2",
+};
+
+struct bd28623_priv {
+	struct device *dev;
+	struct regulator_bulk_data supplies[BD28623_NUM_SUPPLIES];
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *mute_gpio;
+
+	int switch_spk;
+};
+
+static const struct snd_soc_dapm_widget bd28623_widgets[] = {
+	SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_OUTPUT("OUT1P"),
+	SND_SOC_DAPM_OUTPUT("OUT1N"),
+	SND_SOC_DAPM_OUTPUT("OUT2P"),
+	SND_SOC_DAPM_OUTPUT("OUT2N"),
+};
+
+static const struct snd_soc_dapm_route bd28623_routes[] = {
+	{ "OUT1P", NULL, "DAC" },
+	{ "OUT1N", NULL, "DAC" },
+	{ "OUT2P", NULL, "DAC" },
+	{ "OUT2N", NULL, "DAC" },
+};
+
+static int bd28623_power_on(struct bd28623_priv *bd)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(bd->supplies), bd->supplies);
+	if (ret) {
+		dev_err(bd->dev, "Failed to enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	gpiod_set_value_cansleep(bd->reset_gpio, 0);
+	usleep_range(300000, 400000);
+
+	return 0;
+}
+
+static void bd28623_power_off(struct bd28623_priv *bd)
+{
+	gpiod_set_value_cansleep(bd->reset_gpio, 1);
+
+	regulator_bulk_disable(ARRAY_SIZE(bd->supplies), bd->supplies);
+}
+
+static int bd28623_get_switch_spk(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = bd->switch_spk;
+
+	return 0;
+}
+
+static int bd28623_set_switch_spk(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+	if (bd->switch_spk == ucontrol->value.integer.value[0])
+		return 0;
+
+	bd->switch_spk = ucontrol->value.integer.value[0];
+
+	gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new bd28623_controls[] = {
+	SOC_SINGLE_BOOL_EXT("Speaker Switch", 0,
+			    bd28623_get_switch_spk, bd28623_set_switch_spk),
+};
+
+static int bd28623_codec_probe(struct snd_soc_component *component)
+{
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	bd->switch_spk = 1;
+
+	ret = bd28623_power_on(bd);
+	if (ret)
+		return ret;
+
+	gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+	return 0;
+}
+
+static void bd28623_codec_remove(struct snd_soc_component *component)
+{
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+	bd28623_power_off(bd);
+}
+
+static int bd28623_codec_suspend(struct snd_soc_component *component)
+{
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+
+	bd28623_power_off(bd);
+
+	return 0;
+}
+
+static int bd28623_codec_resume(struct snd_soc_component *component)
+{
+	struct bd28623_priv *bd = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	ret = bd28623_power_on(bd);
+	if (ret)
+		return ret;
+
+	gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1);
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver soc_codec_bd = {
+	.probe			= bd28623_codec_probe,
+	.remove			= bd28623_codec_remove,
+	.suspend		= bd28623_codec_suspend,
+	.resume			= bd28623_codec_resume,
+	.dapm_widgets		= bd28623_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(bd28623_widgets),
+	.dapm_routes		= bd28623_routes,
+	.num_dapm_routes	= ARRAY_SIZE(bd28623_routes),
+	.controls		= bd28623_controls,
+	.num_controls		= ARRAY_SIZE(bd28623_controls),
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static struct snd_soc_dai_driver soc_dai_bd = {
+	.name     = "bd28623-speaker",
+	.playback = {
+		.stream_name  = "Playback",
+		.formats      = SNDRV_PCM_FMTBIT_S32_LE |
+				SNDRV_PCM_FMTBIT_S24_LE |
+				SNDRV_PCM_FMTBIT_S16_LE,
+		.rates        = SNDRV_PCM_RATE_48000 |
+				SNDRV_PCM_RATE_44100 |
+				SNDRV_PCM_RATE_32000,
+		.channels_min = 2,
+		.channels_max = 2,
+	},
+};
+
+static int bd28623_probe(struct platform_device *pdev)
+{
+	struct bd28623_priv *bd;
+	struct device *dev = &pdev->dev;
+	int i, ret;
+
+	bd = devm_kzalloc(&pdev->dev, sizeof(struct bd28623_priv), GFP_KERNEL);
+	if (!bd)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(bd->supplies); i++)
+		bd->supplies[i].supply = bd28623_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(bd->supplies),
+				      bd->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to get supplies: %d\n", ret);
+		return ret;
+	}
+
+	bd->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						 GPIOD_OUT_HIGH);
+	if (IS_ERR(bd->reset_gpio)) {
+		dev_err(dev, "Failed to request reset_gpio: %ld\n",
+			PTR_ERR(bd->reset_gpio));
+		return PTR_ERR(bd->reset_gpio);
+	}
+
+	bd->mute_gpio = devm_gpiod_get_optional(dev, "mute",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(bd->mute_gpio)) {
+		dev_err(dev, "Failed to request mute_gpio: %ld\n",
+			PTR_ERR(bd->mute_gpio));
+		return PTR_ERR(bd->mute_gpio);
+	}
+
+	platform_set_drvdata(pdev, bd);
+	bd->dev = dev;
+
+	return devm_snd_soc_register_component(dev, &soc_codec_bd,
+					       &soc_dai_bd, 1);
+}
+
+static const struct of_device_id bd28623_of_match[] = {
+	{ .compatible = "rohm,bd28623", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bd28623_of_match);
+
+static struct platform_driver bd28623_codec_driver = {
+	.driver = {
+		.name = "bd28623",
+		.of_match_table = of_match_ptr(bd28623_of_match),
+	},
+	.probe  = bd28623_probe,
+};
+module_platform_driver(bd28623_codec_driver);
+
+MODULE_AUTHOR("Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>");
+MODULE_DESCRIPTION("ROHM BD28623 speaker amplifier driver");
+MODULE_LICENSE("GPL v2");