diff mbox series

[v4,07/10] scsi: hisi_sas: fix return value of hisi_sas_task_prep()

Message ID 1520425514-205565-8-git-send-email-john.garry@huawei.com
State New
Headers show
Series hisi_sas: support x6000 board and some misc changes | expand

Commit Message

John Garry March 7, 2018, 12:25 p.m. UTC 
From: Xiaofei Tan <tanxiaofei@huawei.com>


It is an implicit regulation that error code that function returned
should be negative. But hisi_sas_task_prep() doesn't follow this.
This may cause problems in the upper layer code.

For example, in sas_expander.c of libsas, smp_execute_task_sg() may
return the number of bytes of underrun. It will be conflicted with
the scenaio lldd_execute_task() return an positive error code.

This patch change the return value from SAS_PHY_DOWN to -ECOMM in
hisi_sas_task_prep().

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

-- 
1.9.1
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 88ad8d4..dff9723 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -316,7 +316,7 @@  static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
 		 */
 		if (device->dev_type != SAS_SATA_DEV)
 			task->task_done(task);
-		return SAS_PHY_DOWN;
+		return -ECOMM;
 	}
 
 	if (DEV_IS_GONE(sas_dev)) {
@@ -327,7 +327,7 @@  static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
 			dev_info(dev, "task prep: device %016llx not ready\n",
 				 SAS_ADDR(device->sas_addr));
 
-		return SAS_PHY_DOWN;
+		return -ECOMM;
 	}
 
 	port = to_hisi_sas_port(sas_port);
@@ -337,7 +337,7 @@  static int hisi_sas_task_prep(struct sas_task *task, struct hisi_sas_dq
 			 "SATA/STP" : "SAS",
 			 device->port->id);
 
-		return SAS_PHY_DOWN;
+		return -ECOMM;
 	}
 
 	if (!sas_protocol_ata(task->task_proto)) {