@@ -140,16 +140,16 @@
};
agnoc@0 {
- qcom,pcie@600000 {
+ pcie@600000 {
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
};
- qcom,pcie@608000 {
+ pcie@608000 {
status = "okay";
perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
};
- qcom,pcie@610000 {
+ pcie@610000 {
status = "okay";
perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
};
@@ -851,7 +851,7 @@
#size-cells = <1>;
ranges;
- pcie0: qcom,pcie@600000 {
+ pcie0: pcie@600000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
@@ -904,7 +904,7 @@
};
- pcie1: qcom,pcie@608000 {
+ pcie1: pcie@608000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
@@ -957,7 +957,7 @@
"bus_slave";
};
- pcie2: qcom,pcie@610000 {
+ pcie2: pcie@610000 {
compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
The node name for a PCIe host bridge must be "pcie" as required by the binging. dtc now warns about it: arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie" arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie" arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' This renames the nodes as appropriate. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 +++--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) -- 2.9.0