diff mbox series

[v2] db410c: set clk node to be probed before relocation

Message ID 20180420193403.20619-1-ramon.fried@linaro.org
State New
Headers show
Series [v2] db410c: set clk node to be probed before relocation | expand

Commit Message

Ramon Fried April 20, 2018, 7:34 p.m. UTC
The clock node is used by the serial driver and it's needed
before relocation.
This patch ensures that the msm-serial driver can actually
use the clock node.

Signed-off-by: Ramon Fried <ramon.fried@linaro.org>
---
v2: Moved the u-boot,dm-pre-reloc attribute to the -uboot.dtsi file

 arch/arm/dts/dragonboard410c-uboot.dtsi | 8 ++++++++
 arch/arm/dts/dragonboard410c.dts        | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi
index c3475c4227..adf6b62f13 100644
--- a/arch/arm/dts/dragonboard410c-uboot.dtsi
+++ b/arch/arm/dts/dragonboard410c-uboot.dtsi
@@ -10,6 +10,14 @@ 
 	config {
 		u-boot,mmc-env-partition = "boot";
 	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+
+	serial@78b0000 {
+		u-boot,dm-pre-reloc;
+		};
+	};
 };
 
 
diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
index 5ccfe7f8c8..d6a296ca37 100644
--- a/arch/arm/dts/dragonboard410c.dts
+++ b/arch/arm/dts/dragonboard410c.dts
@@ -44,12 +44,12 @@ 
 			reg = <0x1800000 0x80000>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
+			u-boot,dm-pre-reloc;
 		};
 
 		serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4";
 			reg = <0x78b0000 0x200>;
-			u-boot,dm-pre-reloc;
 			clock = <&clkc 4>;
 		};