| Message ID | 1525267434-12644-1-git-send-email-alexandre.torgue@st.com |
|---|---|
| State | Accepted |
| Commit | 2ff04d0f537fcb8ff033b4ae97e5e0751e21de5e |
| Headers | show |
| Series | ARM: dts: stm32: Fix IRQ_TYPE_NONE warnings on stm32mp157c | expand |
On 05/02/2018 03:23 PM, Alexandre Torgue wrote: > Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about > the use of IRQ_TYPE_NONE"), a warning is raised if IRQ_TYPE_NONE is used. > So we use IRQ_TYPE_LEVEL_HIGH for usart nodes instead of IRQ_TYPE_NONE. > > Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Hi Alexandre, Tested-by: Fabrice Gasnier <fabrice.gasnier@st.com> BR, Fabrice > > diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi > index 9c1a6c4..d096d06 100644 > --- a/arch/arm/boot/dts/stm32mp157c.dtsi > +++ b/arch/arm/boot/dts/stm32mp157c.dtsi > @@ -314,7 +314,7 @@ > usart2: serial@4000e000 { > compatible = "st,stm32h7-uart"; > reg = <0x4000e000 0x400>; > - interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc USART2_K>; > status = "disabled"; > }; > @@ -322,7 +322,7 @@ > usart3: serial@4000f000 { > compatible = "st,stm32h7-uart"; > reg = <0x4000f000 0x400>; > - interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc USART3_K>; > status = "disabled"; > }; > @@ -330,7 +330,7 @@ > uart4: serial@40010000 { > compatible = "st,stm32h7-uart"; > reg = <0x40010000 0x400>; > - interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc UART4_K>; > status = "disabled"; > }; > @@ -338,7 +338,7 @@ > uart5: serial@40011000 { > compatible = "st,stm32h7-uart"; > reg = <0x40011000 0x400>; > - interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc UART5_K>; > status = "disabled"; > }; > @@ -370,7 +370,7 @@ > uart7: serial@40018000 { > compatible = "st,stm32h7-uart"; > reg = <0x40018000 0x400>; > - interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc UART7_K>; > status = "disabled"; > }; > @@ -378,7 +378,7 @@ > uart8: serial@40019000 { > compatible = "st,stm32h7-uart"; > reg = <0x40019000 0x400>; > - interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc UART8_K>; > status = "disabled"; > }; > @@ -428,7 +428,7 @@ > usart6: serial@44003000 { > compatible = "st,stm32h7-uart"; > reg = <0x44003000 0x400>; > - interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc USART6_K>; > status = "disabled"; > }; > @@ -591,7 +591,7 @@ > usart1: serial@5c000000 { > compatible = "st,stm32h7-uart"; > reg = <0x5c000000 0x400>; > - interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&rcc USART1_K>; > status = "disabled"; > }; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 9c1a6c4..d096d06 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -314,7 +314,7 @@ usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART2_K>; status = "disabled"; }; @@ -322,7 +322,7 @@ usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART3_K>; status = "disabled"; }; @@ -330,7 +330,7 @@ uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; status = "disabled"; }; @@ -338,7 +338,7 @@ uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART5_K>; status = "disabled"; }; @@ -370,7 +370,7 @@ uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART7_K>; status = "disabled"; }; @@ -378,7 +378,7 @@ uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART8_K>; status = "disabled"; }; @@ -428,7 +428,7 @@ usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART6_K>; status = "disabled"; }; @@ -591,7 +591,7 @@ usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART1_K>; status = "disabled"; };
Since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"), a warning is raised if IRQ_TYPE_NONE is used. So we use IRQ_TYPE_LEVEL_HIGH for usart nodes instead of IRQ_TYPE_NONE. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html