diff mbox series

[4/5] kconfig: refactor ncurses package checks for building mconf

Message ID 1526619146-1895-5-git-send-email-yamada.masahiro@socionext.com
State Superseded
Headers show
Series kconfig: refactor package checks for GUI frontends | expand

Commit Message

Masahiro Yamada May 18, 2018, 4:52 a.m. UTC 
The mconf (or its infrastructure, lxdiaglog) depends on ncurses.
check-lxdialog.sh has additional checks in case pkg-config is not
available.  However, qconf and gconf already rely on pkg-config to
check necessary packages.  For simplification, drop the fallback
code from check-lxdialog.sh and move/rename to mconf-cfg.sh to
make it work in the same way as the other GUI frontends.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 scripts/kconfig/Makefile                   | 44 +++++---------
 scripts/kconfig/lxdialog/check-lxdialog.sh | 93 ------------------------------
 scripts/kconfig/lxdialog/dialog.h          |  2 +-
 scripts/kconfig/mconf-cfg.sh               | 24 ++++++++
 4 files changed, 41 insertions(+), 122 deletions(-)
 delete mode 100755 scripts/kconfig/lxdialog/check-lxdialog.sh
 create mode 100755 scripts/kconfig/mconf-cfg.sh

-- 
2.7.4

Comments

Randy Dunlap May 19, 2018, 6:02 p.m. UTC | #1 
On 05/17/18 21:52, Masahiro Yamada wrote:
> The mconf (or its infrastructure, lxdiaglog) depends on ncurses.

> check-lxdialog.sh has additional checks in case pkg-config is not

> available.  However, qconf and gconf already rely on pkg-config to

> check necessary packages.  For simplification, drop the fallback

> code from check-lxdialog.sh and move/rename to mconf-cfg.sh to

> make it work in the same way as the other GUI frontends.

> 

> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>


Hi,

I began by testing "make menuconfig" first and immediately got this:

*
* Unable to find the ncurses.
* Install ncurses (ncurses-devel or libncurses-dev
* depending on your distribution)
*

I do have ncurses-devel installed.  However, it seems that
pkg-config on openSUSE is not very reliable.  zypper (package management
tool) says:

$ zypper info ncurses-devel
Loading repository data...
Reading installed packages...

Information for package ncurses-devel:
--------------------------------------
Repository     : openSUSE-Leap-42.3-Update                            
Name           : ncurses-devel                                        
Version        : 5.9-62.1                                             
Arch           : x86_64                                               
Vendor         : openSUSE                                             
Installed Size : 25.0 MiB                                             
Installed      : Yes                                                  
Status         : up-to-date                                           
Source package : ncurses-5.9-62.1.src                                 
Summary        : Include Files and Libraries mandatory for Development
Description    :                                                      
    This package contains all necessary include files and libraries needed
    to develop applications that require these.
<END>

but there doesn't seem to be a way to get cflags and libs (name).


> diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh

> new file mode 100755

> index 0000000..7d5a4b2

> --- /dev/null

> +++ b/scripts/kconfig/mconf-cfg.sh

> @@ -0,0 +1,24 @@

> +#!/bin/sh

> +# SPDX-License-Identifier: GPL-2.0

> +

> +PKG="ncursesw"

> +PKG2="ncurses"

> +

> +if pkg-config --exists $PKG; then

> +	echo cflags=\"-DNCURSES_WIDECHAR=1 $(pkg-config --cflags $PKG)\"

> +	echo libs=\"$(pkg-config --libs $PKG)\"

> +	exit 0

> +fi

> +

> +if pkg-config --exists $PKG2; then

> +	echo cflags=\"$(pkg-config --cflags $PKG2)\"

> +	echo libs=\"$(pkg-config --libs $PKG2)\"

> +	exit 0

> +fi

> +

> +echo >&2 "*"

> +echo >&2 "* Unable to find the ncurses."


                              the ncurses package."

> +echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"

> +echo >&2 "* depending on your distribution)"


                                 distribution)."

> +echo >&2 "*"

> +exit 1

> 


(more on the other patches later.)

thanks.
-- 
~Randy
Masahiro Yamada May 20, 2018, 8:21 a.m. UTC | #2 
2018-05-20 3:02 GMT+09:00 Randy Dunlap <rdunlap@infradead.org>:
> On 05/17/18 21:52, Masahiro Yamada wrote:

>> The mconf (or its infrastructure, lxdiaglog) depends on ncurses.

>> check-lxdialog.sh has additional checks in case pkg-config is not

>> available.  However, qconf and gconf already rely on pkg-config to

>> check necessary packages.  For simplification, drop the fallback

>> code from check-lxdialog.sh and move/rename to mconf-cfg.sh to

>> make it work in the same way as the other GUI frontends.

>>

>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

>

> Hi,

>

> I began by testing "make menuconfig" first and immediately got this:

>

> *

> * Unable to find the ncurses.

> * Install ncurses (ncurses-devel or libncurses-dev

> * depending on your distribution)

> *

>

> I do have ncurses-devel installed.  However, it seems that

> pkg-config on openSUSE is not very reliable.  zypper (package management

> tool) says:



Oh, this is unfortunate.

I was eager to use pkg-config only,
but I do not want to cause troubles.

Could you check v2, please?



-- 
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index c222745..25a3d25 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -173,60 +173,48 @@  help:
 	@echo  '  xenconfig       - Enable additional options for xen dom0 and guest kernel support'
 	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
-# lxdialog stuff
-check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
-
-# Use recursively expanded variables so we do not call gcc unless
-# we really need to do so. (Do not call gcc as part of make mrproper)
-HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-                    -DLOCALE
-
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
 # conf:	  Used for defconfig, oldconfig and related targets
 # nconf:  Used for the nconfig target.
 #         Utilizes ncurses
-# mconf:  Used for the menuconfig target
-#         Utilizes the lxdialog package
 # object files used by all kconfig flavours
 
-lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
-lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
-
 conf-objs	:= conf.o  zconf.tab.o
-mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
 nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
 kxgettext-objs	:= kxgettext.o zconf.tab.o
 
-hostprogs-y := conf nconf mconf kxgettext
+hostprogs-y := conf nconf kxgettext
 
 targets		+= zconf.lex.c
 clean-files	+= gconf.glade.h
 clean-files     += config.pot linux.pot
 
-# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
-PHONY += $(obj)/dochecklxdialog
-$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/dochecklxdialog
-$(obj)/dochecklxdialog:
-	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf)
-
-always := dochecklxdialog
-
 # Add environment specific flags
-HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
-HOST_EXTRACXXFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCXX) $(HOSTCXXFLAGS))
-
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) \
+		    -DLOCALE
+HOST_EXTRACXXFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCXX) $(HOSTCXXFLAGS)) \
+		    -DLOCALE
 # generated files seem to need this to find local include files
 HOSTCFLAGS_zconf.lex.o	:= -I$(src)
 HOSTCFLAGS_zconf.tab.o	:= -I$(src)
 
-HOSTLOADLIBES_mconf   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
-
 HOSTLOADLIBES_nconf	= $(shell \
 				pkg-config --libs menuw panelw ncursesw 2>/dev/null \
 				|| pkg-config --libs menu panel ncurses 2>/dev/null \
 				|| echo "-lmenu -lpanel -lncurses"  )
 
+# mconf: Used for the menuconfig target based on lxdialog
+hostprogs-y	+= mconf
+lxdialog	:= checklist.o inputbox.o menubox.o textbox.o util.o yesno.o
+mconf-objs	:= mconf.o zconf.tab.o $(addprefix lxdialog/, $(lxdialog))
+
+HOSTLOADLIBES_mconf = $(shell . $(obj)/.mconf-cfg && echo $$libs)
+$(foreach f, mconf.o $(lxdialog), \
+  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/.mconf-cfg && echo $$$$cflags)))
+
+$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/.mconf-cfg
+
 # qconf: Used for the xconfig target based on Qt
 hostprogs-y	+= qconf
 qconf-cxxobjs	:= qconf.o
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
deleted file mode 100755
index 6c0bcd9..0000000
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ /dev/null
@@ -1,93 +0,0 @@ 
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Check ncurses compatibility
-
-# What library to link
-ldflags()
-{
-	pkg-config --libs ncursesw 2>/dev/null && exit
-	pkg-config --libs ncurses 2>/dev/null && exit
-	for ext in so a dll.a dylib ; do
-		for lib in ncursesw ncurses curses ; do
-			$cc -print-file-name=lib${lib}.${ext} | grep -q /
-			if [ $? -eq 0 ]; then
-				echo "-l${lib}"
-				exit
-			fi
-		done
-	done
-	exit 1
-}
-
-# Where is ncurses.h?
-ccflags()
-{
-	if pkg-config --cflags ncursesw 2>/dev/null; then
-		echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
-	elif pkg-config --cflags ncurses 2>/dev/null; then
-		echo '-DCURSES_LOC="<ncurses.h>"'
-	elif [ -f /usr/include/ncursesw/curses.h ]; then
-		echo '-I/usr/include/ncursesw -DCURSES_LOC="<curses.h>"'
-		echo ' -DNCURSES_WIDECHAR=1'
-	elif [ -f /usr/include/ncurses/ncurses.h ]; then
-		echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
-	elif [ -f /usr/include/ncurses/curses.h ]; then
-		echo '-I/usr/include/ncurses -DCURSES_LOC="<curses.h>"'
-	elif [ -f /usr/include/ncurses.h ]; then
-		echo '-DCURSES_LOC="<ncurses.h>"'
-	else
-		echo '-DCURSES_LOC="<curses.h>"'
-	fi
-}
-
-# Temp file, try to clean up after us
-tmp=.lxdialog.tmp
-trap "rm -f $tmp" 0 1 2 3 15
-
-# Check if we can link to ncurses
-check() {
-        $cc -x c - -o $tmp 2>/dev/null <<'EOF'
-#include CURSES_LOC
-main() {}
-EOF
-	if [ $? != 0 ]; then
-	    echo " *** Unable to find the ncurses libraries or the"       1>&2
-	    echo " *** required header files."                            1>&2
-	    echo " *** 'make menuconfig' requires the ncurses libraries." 1>&2
-	    echo " *** "                                                  1>&2
-	    echo " *** Install ncurses (ncurses-devel or libncurses-dev " 1>&2
-	    echo " *** depending on your distribution) and try again."    1>&2
-	    echo " *** "                                                  1>&2
-	    exit 1
-	fi
-}
-
-usage() {
-	printf "Usage: $0 [-check compiler options|-ccflags|-ldflags compiler options]\n"
-}
-
-if [ $# -eq 0 ]; then
-	usage
-	exit 1
-fi
-
-cc=""
-case "$1" in
-	"-check")
-		shift
-		cc="$@"
-		check
-		;;
-	"-ccflags")
-		ccflags
-		;;
-	"-ldflags")
-		shift
-		cc="$@"
-		ldflags
-		;;
-	"*")
-		usage
-		exit 1
-		;;
-esac
diff --git a/scripts/kconfig/lxdialog/dialog.h b/scripts/kconfig/lxdialog/dialog.h
index fcffd5b..52e30a0 100644
--- a/scripts/kconfig/lxdialog/dialog.h
+++ b/scripts/kconfig/lxdialog/dialog.h
@@ -35,7 +35,7 @@ 
 #ifdef __sun__
 #define CURS_MACROS
 #endif
-#include CURSES_LOC
+#include <ncurses.h>
 
 /*
  * Colors in ncurses 1.9.9e do not work properly since foreground and
diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh
new file mode 100755
index 0000000..7d5a4b2
--- /dev/null
+++ b/scripts/kconfig/mconf-cfg.sh
@@ -0,0 +1,24 @@ 
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+PKG="ncursesw"
+PKG2="ncurses"
+
+if pkg-config --exists $PKG; then
+	echo cflags=\"-DNCURSES_WIDECHAR=1 $(pkg-config --cflags $PKG)\"
+	echo libs=\"$(pkg-config --libs $PKG)\"
+	exit 0
+fi
+
+if pkg-config --exists $PKG2; then
+	echo cflags=\"$(pkg-config --cflags $PKG2)\"
+	echo libs=\"$(pkg-config --libs $PKG2)\"
+	exit 0
+fi
+
+echo >&2 "*"
+echo >&2 "* Unable to find the ncurses."
+echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"
+echo >&2 "* depending on your distribution)"
+echo >&2 "*"
+exit 1