@@ -182,6 +182,8 @@ [Components.common]
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
@@ -123,6 +123,8 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
new file mode 100644
@@ -0,0 +1,198 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include "HiKey960Dxe.h"
+
+STATIC
+VOID
+InitSdCard (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ //
+ // LDO16
+ // 000: 1.75V, 001: 1.8V, 010: 2.4V, 011: 2.6V, 100: 2.7V,
+ // 101: 2.85V, 110: 2.95V, 111: 3.0V.
+ //
+ Data = MmioRead32 (PMIC_LDO16_VSET_REG) & LDO16_VSET_MASK;
+ Data |= 6;
+ MmioWrite32 (PMIC_LDO16_VSET_REG, Data);
+ MmioOr32 (PMIC_LDO16_ONOFF_ECO_REG, LDO16_ONOFF_ECO_LDO16_ENABLE);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // LDO9
+ // 000: 1.75V, 001: 1.8V, 010: 1.825V, 011: 2.8V, 100: 2.85V,
+ // 101: 2.95V, 110: 3.0V, 111: 3.3V.
+ //
+ Data = MmioRead32 (PMIC_LDO9_VSET_REG) & LDO9_VSET_MASK;
+ Data |= 5;
+ MmioWrite32 (PMIC_LDO9_VSET_REG, Data);
+ MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // GPIO203
+ //
+ MmioWrite32 (IOMG_AO_REG_BASE + (24 << 2), 0); // GPIO function
+
+ //
+ // SD pinmux
+ //
+ MmioWrite32 (IOMG_MMC0_000_REG, IOMG_FUNC1); // SD_CLK
+ MmioWrite32 (IOMG_MMC0_001_REG, IOMG_FUNC1); // SD_CMD
+ MmioWrite32 (IOMG_MMC0_002_REG, IOMG_FUNC1); // SD_DATA0
+ MmioWrite32 (IOMG_MMC0_003_REG, IOMG_FUNC1); // SD_DATA1
+ MmioWrite32 (IOMG_MMC0_004_REG, IOMG_FUNC1); // SD_DATA2
+ MmioWrite32 (IOMG_MMC0_005_REG, IOMG_FUNC1); // SD_DATA3
+ MmioWrite32 (IOCG_MMC0_000_REG, IOCG_DRIVE (15)); // SD_CLK float with 32mA
+ MmioWrite32 (IOCG_MMC0_001_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_CMD
+ MmioWrite32 (IOCG_MMC0_002_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA0
+ MmioWrite32 (IOCG_MMC0_003_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA1
+ MmioWrite32 (IOCG_MMC0_004_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA2
+ MmioWrite32 (IOCG_MMC0_005_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA3
+
+ //
+ // SC_SEL_SD:
+ // 0xx: 3.2MHz, 100: PPLL0, 101: PPLL1, 11x: PPLL2.
+ // SC_DIV_SD:
+ // divider = value + 1
+ //
+ do {
+ MmioOr32 (
+ CRG_CLKDIV4,
+ CLKDIV4_SC_SEL_SD (7) |
+ (CLKDIV4_SC_SEL_SD_MASK << CLKDIV4_SC_MASK_SHIFT)
+ );
+ Data = MmioRead32 (CRG_CLKDIV4) & CLKDIV4_SC_SEL_SD_MASK;
+ } while (Data != CLKDIV4_SC_SEL_SD (7));
+
+ //
+ // Unreset SD controller
+ //
+ MmioWrite32 (CRG_PERRSTDIS4, PERRSTEN4_SD);
+ do {
+ Data = MmioRead32 (CRG_PERRSTSTAT4);
+ } while ((Data & PERRSTEN4_SD) == PERRSTEN4_SD);
+ //
+ // Enable SD controller clock
+ //
+ MmioOr32 (CRG_PEREN0, PEREN0_GT_HCLK_SD);
+ MmioOr32 (CRG_PEREN4, PEREN4_GT_CLK_SD);
+ do {
+ Data = MmioRead32 (CRG_PERCLKEN4);
+ } while ((Data & PEREN4_GT_CLK_SD) != PEREN4_GT_CLK_SD);
+}
+
+VOID
+InitPeripherals (
+ IN VOID
+ )
+{
+ //
+ // Enable FPLL0
+ //
+ MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN);
+
+ InitSdCard ();
+
+ //
+ // Enable wifi clock
+ //
+ MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK);
+ MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K);
+}
+
+/**
+ Notification function of the event defined as belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
+ the entry point of the driver.
+
+ This function is called when an event belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
+ event is signalled once at the end of the dispatching of all
+ drivers (end of the so called DXE phase).
+
+ @param[in] Event Event declared in the entry point of the driver whose
+ notification function is being invoked.
+ @param[in] Context NULL
+**/
+STATIC
+VOID
+OnEndOfDxe (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINT32 BootMode;
+ CHAR8 Buf[64];
+ UINTN Count;
+
+ BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
+ if (BootMode == BOOT_MODE_RECOVERY) {
+ Count = AsciiSPrint (
+ Buf,
+ 64,
+ "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
+ );
+ SerialPortWrite ((UINT8 *)Buf, Count);
+ Count = AsciiSPrint (
+ Buf,
+ 64,
+ "Switch to normal boot mode, then reboot to boot kernel.\n"
+ );
+ SerialPortWrite ((UINT8 *)Buf, Count);
+ }
+}
+
+EFI_STATUS
+EFIAPI
+HiKey960EntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT EndOfDxeEvent;
+
+ InitPeripherals ();
+
+ //
+ // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group.
+ // The "OnEndOfDxe()" function is declared as the call back function.
+ // It will be called at the end of the DXE phase when an event of the
+ // same group is signalled to inform about the end of the DXE phase.
+ // Install the INSTALL_FDT_PROTOCOL protocol.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnEndOfDxe,
+ NULL,
+ &gEfiEndOfDxeEventGroupGuid,
+ &EndOfDxeEvent
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
new file mode 100644
@@ -0,0 +1,37 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HIKEY960DXE_H__
+#define __HIKEY960DXE_H__
+
+#include <Guid/EventGroup.h>
+
+#include <Hi3660.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+enum {
+ BOOT_MODE_RECOVERY = 0,
+ BOOT_MODE_MASK = 1,
+};
+
+#endif /* __HIKEY960DXE_H__ */
new file mode 100644
@@ -0,0 +1,47 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKey960Dxe
+ FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960EntryPoint
+
+[Sources.common]
+ HiKey960Dxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/Hi3660/Hi3660.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DxeServicesTableLib
+ IoLib
+ PcdLib
+ TimerLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+
+[Depex]
+ TRUE
new file mode 100644
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001a
+ PACKAGE_NAME = Hi3660
+ PACKAGE_GUID = e457ba7c-faba-4dea-b274-f5962d016c79
+ PACKAGE_VERSION = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+[Includes.common]
+ Include # Root include for the package
+
+[Guids.common]
+ gHi3660TokenSpaceGuid = { 0x4abc73fa, 0x8a49, 0x4d2c, { 0x95, 0x44, 0x17, 0x87, 0x29, 0x06, 0x20, 0xb4 } }
new file mode 100644
@@ -0,0 +1,195 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI3660_H__
+#define __HI3660_H__
+
+#define HKADC_SSI_REG_BASE 0xE82B8000
+
+#define PCTRL_REG_BASE 0xE8A09000
+
+#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010)
+#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064)
+
+#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1)
+#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25)
+
+#define SCTRL_REG_BASE 0xFFF0A000
+
+#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120)
+#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0)
+
+#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C)
+
+#define USB3OTG_BC_REG_BASE 0xFF200000
+
+#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000)
+#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008)
+#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C)
+#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010)
+#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018)
+#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C)
+#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050)
+#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054)
+
+#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0)
+#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6)
+#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5)
+#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16)
+#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1)
+#define USB3OTG_PHY_CR_ACK (1 << 0)
+#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4)
+#define USB3OTG_PHY_CR_WRITE (1 << 3)
+#define USB3OTG_PHY_CR_READ (1 << 2)
+#define USB3OTG_PHY_CR_CAP_DATA (1 << 1)
+#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0)
+
+#define PMU_REG_BASE 0xFFF34000
+#define PMIC_LDO9_VSET_REG (PMU_REG_BASE + (0x068 << 2))
+#define LDO9_VSET_MASK (7 << 0)
+
+#define PMIC_LDO16_ONOFF_ECO_REG (PMU_REG_BASE + (0x078 << 2))
+#define LDO16_ONOFF_ECO_LDO16_ENABLE BIT1
+#define LDO16_ONOFF_ECO_ECO_ENABLE BIT0
+
+#define PMIC_LDO16_VSET_REG (PMU_REG_BASE + (0x079 << 2))
+#define LDO16_VSET_MASK (7 << 0)
+
+#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2))
+#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2))
+
+#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5)
+#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1)
+
+
+#define CRG_REG_BASE 0xFFF35000
+
+#define CRG_PEREN0 (CRG_REG_BASE + 0x000)
+#define CRG_PEREN2 (CRG_REG_BASE + 0x020)
+#define CRG_PERDIS2 (CRG_REG_BASE + 0x024)
+#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028)
+#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C)
+#define CRG_PEREN4 (CRG_REG_BASE + 0x040)
+#define CRG_PERDIS4 (CRG_REG_BASE + 0x044)
+#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048)
+#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C)
+#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078)
+#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C)
+#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080)
+#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084)
+#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088)
+#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C)
+#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090)
+#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094)
+#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098)
+#define CRG_CLKDIV4 (CRG_REG_BASE + 0x0B8)
+#define CRG_ISOEN (CRG_REG_BASE + 0x144)
+#define CRG_ISODIS (CRG_REG_BASE + 0x148)
+#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C)
+
+#define PERI_UFS_BIT (1 << 12)
+#define PERI_ARST_UFS_BIT (1 << 7)
+
+#define PEREN0_GT_HCLK_SD BIT30
+
+#define PEREN2_HKADCSSI BIT24
+
+#define PEREN4_GT_CLK_SD BIT17
+#define PEREN4_GT_ACLK_USB3OTG (1 << 1)
+#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0)
+
+#define PERRSTEN2_HKADCSSI BIT24
+
+#define PERRSTEN4_SD BIT18
+
+#define PERRSTEN4_USB3OTG_MUX (1 << 8)
+#define PERRSTEN4_USB3OTG_AHBIF (1 << 7)
+#define PERRSTEN4_USB3OTG_32K (1 << 6)
+#define PERRSTEN4_USB3OTG (1 << 5)
+#define PERRSTEN4_USB3OTGPHY_POR (1 << 3)
+
+#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25)
+
+#define CLKDIV4_SC_SEL_SD_MASK (7 << 4)
+#define CLKDIV4_SC_DIV_SD_MASK 0xf
+#define CLKDIV4_SC_MASK_SHIFT 16
+#define CLKDIV4_SC_SEL_SD(x) (((x) & 0x7) << 4)
+#define CLKDIV4_SC_DIV_SD(x) ((x) & 0xf)
+
+#define CRG_CLKDIV16_OFFSET 0x0E8
+#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9)
+#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9)
+
+#define CRG_CLKDIV17_OFFSET 0x0EC
+#define SC_DIV_UFS_PERIBUS (1 << 14)
+
+#define IOMG_MMC0_REG_BASE 0xFF37E000
+#define IOMG_MMC0_000_REG (IOMG_MMC0_REG_BASE + 0x000)
+#define IOMG_MMC0_001_REG (IOMG_MMC0_REG_BASE + 0x004)
+#define IOMG_MMC0_002_REG (IOMG_MMC0_REG_BASE + 0x008)
+#define IOMG_MMC0_003_REG (IOMG_MMC0_REG_BASE + 0x00C)
+#define IOMG_MMC0_004_REG (IOMG_MMC0_REG_BASE + 0x010)
+#define IOMG_MMC0_005_REG (IOMG_MMC0_REG_BASE + 0x014)
+
+#define IOCG_MMC0_REG_BASE 0xFF37E800
+#define IOCG_MMC0_000_REG (IOCG_MMC0_REG_BASE + 0x000)
+#define IOCG_MMC0_001_REG (IOCG_MMC0_REG_BASE + 0x004)
+#define IOCG_MMC0_002_REG (IOCG_MMC0_REG_BASE + 0x008)
+#define IOCG_MMC0_003_REG (IOCG_MMC0_REG_BASE + 0x00C)
+#define IOCG_MMC0_004_REG (IOCG_MMC0_REG_BASE + 0x010)
+#define IOCG_MMC0_005_REG (IOCG_MMC0_REG_BASE + 0x014)
+
+#define IOMG_AO_REG_BASE 0xFFF11000
+#define IOMG_AO_006_REG (IOMG_AO_REG_BASE + 0x018)
+
+#define IOMG_FUNC0 0
+#define IOMG_FUNC1 1
+#define IOCG_PULLUP BIT0
+#define IOCG_PULLDOWN BIT1
+#define IOCG_DRIVE(x) ((x) << 4)
+
+#define UFS_SYS_REG_BASE 0xFF3B1000
+
+#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004
+#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008
+#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C
+#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010
+#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014
+#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018
+#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C
+#define UFS_SYS_MONITOR_HH_OFFSET 0x03C
+#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C
+#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060
+#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0)
+#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (1 << 16)
+#define BIT_UFS_DEVICE_RESET (1 << 0)
+
+#endif /* __HI3660_H__ */
Do some basic initliazation on peripherals, such as pins and regulators. The hardcoding code is taken from non-open reference code. Can't fix it for lack of documents. Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- Platform/Hisilicon/HiKey960/HiKey960.dsc | 2 + Platform/Hisilicon/HiKey960/HiKey960.fdf | 2 + .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 198 +++++++++++++++++++++ .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 37 ++++ .../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 47 +++++ Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 ++++ Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 195 ++++++++++++++++++++ 7 files changed, 513 insertions(+) create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf create mode 100644 Silicon/Hisilicon/Hi3660/Hi3660.dec create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel