Add an "else" argument to IFN_COND_* functions

Message ID 878t89e9fj.fsf@linaro.org
State New
Headers show
Series
  • Add an "else" argument to IFN_COND_* functions
Related show

Commit Message

Richard Sandiford May 24, 2018, 8:37 a.m.
As suggested by Richard B, this patch changes the IFN_COND_*
functions so that they take the else value of the ?: operation
as a final argument, rather than always using argument 1.

All current callers will still use the equivalent of argument 1,
so this patch makes the SVE code assert that for now.  Later patches
add the general case.

This relies on the earlier "Try harder to preserve operand ties in
maybe_legitimize_operands"
https://gcc.gnu.org/ml/gcc-patches/2018-05/msg01199.html

Tested on aarch64-linux-gnu (with and without SVE), aarch64_be-elf
and x86_64-linux-gnu.  OK for the non-AArch64 bits?

Thanks,
Richard


2018-05-24  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
	* doc/md.texi: Update the documentation of the cond_* optabs
	to mention the new final operand.  Fix GET_MODE_NUNITS call.
	Describe the scalar case too.
	* internal-fn.def (IFN_EXTRACT_LAST): Change type to fold_left.
	* internal-fn.c (expand_cond_unary_optab_fn): Expect 3 operands
	instead of 2.
	(expand_cond_binary_optab_fn): Expect 4 operands instead of 3.
	(get_conditional_internal_fn): Update comment.
	* tree-vect-loop.c (vectorizable_reduction): Pass the original
	accumulator value as a final argument to conditional functions.
	* config/aarch64/aarch64-sve.md (cond_<optab><mode>): Turn into
	a define_expand and add an "else" operand.  Assert for now that
	the else operand is equal to operand 2.  Use SVE_INT_BINARY and
	SVE_COND_FP_BINARY instead of SVE_COND_INT_OP and SVE_COND_FP_OP.
	(*cond_<optab><mode>): New patterns.
	* config/aarch64/iterators.md (UNSPEC_COND_SMAX, UNSPEC_COND_UMAX)
	(UNSPEC_COND_SMIN, UNSPEC_COND_UMIN, UNSPEC_COND_AND, UNSPEC_COND_ORR)
	(UNSPEC_COND_EOR): Delete.
	(optab): Remove associated mappings.
	(SVE_INT_BINARY): New code iterator.
	(sve_int_op): Remove int attribute and add "minus" to the code
	attribute.
	(SVE_COND_INT_OP): Delete.
	(SVE_COND_FP_OP): Rename to...
	(SVE_COND_FP_BINARY): ...this.

Comments

Richard Biener May 24, 2018, 10:07 a.m. | #1
On Thu, May 24, 2018 at 10:37 AM Richard Sandiford <
richard.sandiford@linaro.org> wrote:

> As suggested by Richard B, this patch changes the IFN_COND_*

> functions so that they take the else value of the ?: operation

> as a final argument, rather than always using argument 1.


> All current callers will still use the equivalent of argument 1,

> so this patch makes the SVE code assert that for now.  Later patches

> add the general case.


> This relies on the earlier "Try harder to preserve operand ties in

> maybe_legitimize_operands"

> https://gcc.gnu.org/ml/gcc-patches/2018-05/msg01199.html


> Tested on aarch64-linux-gnu (with and without SVE), aarch64_be-elf

> and x86_64-linux-gnu.  OK for the non-AArch64 bits?


OK.

Thanks,
Richard.

> Thanks,

> Richard



> 2018-05-24  Richard Sandiford  <richard.sandiford@linaro.org>


> gcc/

>          * doc/md.texi: Update the documentation of the cond_* optabs

>          to mention the new final operand.  Fix GET_MODE_NUNITS call.

>          Describe the scalar case too.

>          * internal-fn.def (IFN_EXTRACT_LAST): Change type to fold_left.

>          * internal-fn.c (expand_cond_unary_optab_fn): Expect 3 operands

>          instead of 2.

>          (expand_cond_binary_optab_fn): Expect 4 operands instead of 3.

>          (get_conditional_internal_fn): Update comment.

>          * tree-vect-loop.c (vectorizable_reduction): Pass the original

>          accumulator value as a final argument to conditional functions.

>          * config/aarch64/aarch64-sve.md (cond_<optab><mode>): Turn into

>          a define_expand and add an "else" operand.  Assert for now that

>          the else operand is equal to operand 2.  Use SVE_INT_BINARY and

>          SVE_COND_FP_BINARY instead of SVE_COND_INT_OP and SVE_COND_FP_OP.

>          (*cond_<optab><mode>): New patterns.

>          * config/aarch64/iterators.md (UNSPEC_COND_SMAX, UNSPEC_COND_UMAX)

>          (UNSPEC_COND_SMIN, UNSPEC_COND_UMIN, UNSPEC_COND_AND,

UNSPEC_COND_ORR)
>          (UNSPEC_COND_EOR): Delete.

>          (optab): Remove associated mappings.

>          (SVE_INT_BINARY): New code iterator.

>          (sve_int_op): Remove int attribute and add "minus" to the code

>          attribute.

>          (SVE_COND_INT_OP): Delete.

>          (SVE_COND_FP_OP): Rename to...

>          (SVE_COND_FP_BINARY): ...this.


> Index: gcc/doc/md.texi

> ===================================================================

> --- gcc/doc/md.texi     2018-05-24 09:31:46.687834412 +0100

> +++ gcc/doc/md.texi     2018-05-24 09:32:10.522816506 +0100

> @@ -6349,13 +6349,21 @@ operand 0, otherwise (operand 2 + operan

>   @itemx @samp{cond_smax@var{mode}}

>   @itemx @samp{cond_umin@var{mode}}

>   @itemx @samp{cond_umax@var{mode}}

> -Perform an elementwise operation on vector operands 2 and 3,

> -under the control of the vector mask in operand 1, and store the result

> -in operand 0.  This is equivalent to:

> +When operand 1 is true, perform an operation on operands 2 and 3 and

> +store the result in operand 0, otherwise store operand 4 in operand 0.

> +The operation works elementwise if the operands are vectors.

> +

> +The scalar case is equivalent to:

> +

> +@smallexample

> +op0 = op1 ? op2 @var{op} op3 : op4;

> +@end smallexample

> +

> +while the vector case is equivalent to:


>   @smallexample

> -for (i = 0; i < GET_MODE_NUNITS (@var{n}); i++)

> -  op0[i] = op1[i] ? op2[i] @var{op} op3[i] : op2[i];

> +for (i = 0; i < GET_MODE_NUNITS (@var{m}); i++)

> +  op0[i] = op1[i] ? op2[i] @var{op} op3[i] : op4[i];

>   @end smallexample


>   where, for example, @var{op} is @code{+} for @samp{cond_add@var{mode}}.

> @@ -6364,8 +6372,9 @@ When defined for floating-point modes, t

>   are not interpreted if @var{op1[i]} is false, just like they would not

>   be in a normal C @samp{?:} condition.


> -Operands 0, 2 and 3 all have mode @var{m}, while operand 1 has the mode

> -returned by @code{TARGET_VECTORIZE_GET_MASK_MODE}.

> +Operands 0, 2, 3 and 4 all have mode @var{m}.  Operand 1 is a scalar

> +integer if @var{m} is scalar, otherwise it has the mode returned by

> +@code{TARGET_VECTORIZE_GET_MASK_MODE}.


>   @cindex @code{neg@var{mode}cc} instruction pattern

>   @item @samp{neg@var{mode}cc}

> Index: gcc/internal-fn.def

> ===================================================================

> --- gcc/internal-fn.def 2018-05-24 09:31:46.687834412 +0100

> +++ gcc/internal-fn.def 2018-05-24 09:32:10.522816506 +0100

> @@ -173,7 +173,7 @@ DEF_INTERNAL_OPTAB_FN (REDUC_XOR, ECF_CO


>   /* Extract the last active element from a vector.  */

>   DEF_INTERNAL_OPTAB_FN (EXTRACT_LAST, ECF_CONST | ECF_NOTHROW,

> -                      extract_last, cond_unary)

> +                      extract_last, fold_left)


>   /* Same, but return the first argument if no elements are active.  */

>   DEF_INTERNAL_OPTAB_FN (FOLD_EXTRACT_LAST, ECF_CONST | ECF_NOTHROW,

> Index: gcc/internal-fn.c

> ===================================================================

> --- gcc/internal-fn.c   2018-05-24 09:31:46.687834412 +0100

> +++ gcc/internal-fn.c   2018-05-24 09:32:10.522816506 +0100

> @@ -2988,10 +2988,10 @@ #define expand_ternary_optab_fn(FN, STMT

>     expand_direct_optab_fn (FN, STMT, OPTAB, 3)


>   #define expand_cond_unary_optab_fn(FN, STMT, OPTAB) \

> -  expand_direct_optab_fn (FN, STMT, OPTAB, 2)

> +  expand_direct_optab_fn (FN, STMT, OPTAB, 3)


>   #define expand_cond_binary_optab_fn(FN, STMT, OPTAB) \

> -  expand_direct_optab_fn (FN, STMT, OPTAB, 3)

> +  expand_direct_optab_fn (FN, STMT, OPTAB, 4)


>   #define expand_fold_extract_optab_fn(FN, STMT, OPTAB) \

>     expand_direct_optab_fn (FN, STMT, OPTAB, 3)

> @@ -3219,12 +3219,19 @@ #define DEF_INTERNAL_FN(CODE, FLAGS, FNS

>     0

>   };


> -/* Return a function that performs the conditional form of CODE, i.e.:

> +/* Return a function that only performs CODE when a certain condition is

met
> +   and that uses a given fallback value otherwise.  For example, if CODE

is
> +   a binary operation associated with conditional function FN:

> +

> +     LHS = FN (COND, A, B, ELSE)

> +

> +   is equivalent to the C expression:

> +

> +     LHS = COND ? A CODE B : ELSE;


> -     LHS = RHS1 ? RHS2 CODE RHS3 : RHS2

> +   operating elementwise if the operands are vectors.


> -   (operating elementwise if the operands are vectors).  Return IFN_LAST

> -   if no such function exists.  */

> +   Return IFN_LAST if no such function exists.  */


>   internal_fn

>   get_conditional_internal_fn (tree_code code)

> Index: gcc/tree-vect-loop.c

> ===================================================================

> --- gcc/tree-vect-loop.c        2018-05-24 09:31:46.687834412 +0100

> +++ gcc/tree-vect-loop.c        2018-05-24 09:32:10.523816456 +0100

> @@ -7222,8 +7222,9 @@ vectorizable_reduction (gimple *stmt, gi

>                  }

>                tree mask = vect_get_loop_mask (gsi, masks, vec_num *

ncopies,
>                                                vectype_in, i * ncopies +

j);
> -             gcall *call = gimple_build_call_internal (cond_fn, 3, mask,

> -                                                       vop[0], vop[1]);

> +             gcall *call = gimple_build_call_internal (cond_fn, 4, mask,

> +                                                       vop[0], vop[1],

> +                                                       vop[0]);

>                new_temp = make_ssa_name (vec_dest, call);

>                gimple_call_set_lhs (call, new_temp);

>                gimple_call_set_nothrow (call, true);

> Index: gcc/config/aarch64/aarch64-sve.md

> ===================================================================

> --- gcc/config/aarch64/aarch64-sve.md   2018-05-24 09:32:03.433159783

+0100
> +++ gcc/config/aarch64/aarch64-sve.md   2018-05-24 09:32:10.521816556

+0100
> @@ -1787,14 +1787,31 @@ (define_insn "*<maxmin_uns><mode>3"

>     "<maxmin_uns_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"

>   )


> +;; Predicated integer operations with select.

> +(define_expand "cond_<optab><mode>"

> +  [(set (match_operand:SVE_I 0 "register_operand")

> +       (unspec:SVE_I

> +         [(match_operand:<VPRED> 1 "register_operand")

> +          (SVE_INT_BINARY:SVE_I

> +            (match_operand:SVE_I 2 "register_operand")

> +            (match_operand:SVE_I 3 "register_operand"))

> +          (match_operand:SVE_I 4 "register_operand")]

> +         UNSPEC_SEL))]

> +  "TARGET_SVE"

> +{

> +  gcc_assert (rtx_equal_p (operands[2], operands[4]));

> +})

> +

>   ;; Predicated integer operations.

> -(define_insn "cond_<optab><mode>"

> +(define_insn "*cond_<optab><mode>"

>     [(set (match_operand:SVE_I 0 "register_operand" "=w")

>          (unspec:SVE_I

>            [(match_operand:<VPRED> 1 "register_operand" "Upl")

> -          (match_operand:SVE_I 2 "register_operand" "0")

> -          (match_operand:SVE_I 3 "register_operand" "w")]

> -         SVE_COND_INT_OP))]

> +          (SVE_INT_BINARY:SVE_I

> +            (match_operand:SVE_I 2 "register_operand" "0")

> +            (match_operand:SVE_I 3 "register_operand" "w"))

> +          (match_dup 2)]

> +         UNSPEC_SEL))]

>     "TARGET_SVE"

>     "<sve_int_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"

>   )

> @@ -2566,14 +2583,35 @@ (define_expand "vec_pack_<su>fix_trunc_v

>     }

>   )


> +;; Predicated floating-point operations with select.

> +(define_expand "cond_<optab><mode>"

> +  [(set (match_operand:SVE_F 0 "register_operand")

> +       (unspec:SVE_F

> +         [(match_operand:<VPRED> 1 "register_operand")

> +          (unspec:SVE_F

> +            [(match_dup 1)

> +             (match_operand:SVE_F 2 "register_operand")

> +             (match_operand:SVE_F 3 "register_operand")]

> +            SVE_COND_FP_BINARY)

> +          (match_operand:SVE_F 4 "register_operand")]

> +         UNSPEC_SEL))]

> +  "TARGET_SVE"

> +{

> +  gcc_assert (rtx_equal_p (operands[2], operands[4]));

> +})

> +

>   ;; Predicated floating-point operations.

> -(define_insn "cond_<optab><mode>"

> +(define_insn "*cond_<optab><mode>"

>     [(set (match_operand:SVE_F 0 "register_operand" "=w")

>          (unspec:SVE_F

>            [(match_operand:<VPRED> 1 "register_operand" "Upl")

> -          (match_operand:SVE_F 2 "register_operand" "0")

> -          (match_operand:SVE_F 3 "register_operand" "w")]

> -         SVE_COND_FP_OP))]

> +          (unspec:SVE_F

> +            [(match_dup 1)

> +             (match_operand:SVE_F 2 "register_operand" "0")

> +             (match_operand:SVE_F 3 "register_operand" "w")]

> +            SVE_COND_FP_BINARY)

> +          (match_dup 2)]

> +         UNSPEC_SEL))]

>     "TARGET_SVE"

>     "<sve_fp_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"

>   )

> Index: gcc/config/aarch64/iterators.md

> ===================================================================

> --- gcc/config/aarch64/iterators.md     2018-05-24 09:32:03.433159783

+0100
> +++ gcc/config/aarch64/iterators.md     2018-05-24 09:32:10.521816556

+0100
> @@ -464,13 +464,6 @@ (define_c_enum "unspec"

>       UNSPEC_UMUL_HIGHPART ; Used in aarch64-sve.md.

>       UNSPEC_COND_ADD    ; Used in aarch64-sve.md.

>       UNSPEC_COND_SUB    ; Used in aarch64-sve.md.

> -    UNSPEC_COND_SMAX   ; Used in aarch64-sve.md.

> -    UNSPEC_COND_UMAX   ; Used in aarch64-sve.md.

> -    UNSPEC_COND_SMIN   ; Used in aarch64-sve.md.

> -    UNSPEC_COND_UMIN   ; Used in aarch64-sve.md.

> -    UNSPEC_COND_AND    ; Used in aarch64-sve.md.

> -    UNSPEC_COND_ORR    ; Used in aarch64-sve.md.

> -    UNSPEC_COND_EOR    ; Used in aarch64-sve.md.

>       UNSPEC_COND_LT     ; Used in aarch64-sve.md.

>       UNSPEC_COND_LE     ; Used in aarch64-sve.md.

>       UNSPEC_COND_EQ     ; Used in aarch64-sve.md.

> @@ -1207,6 +1200,9 @@ (define_code_iterator SVE_INT_UNARY [neg

>   ;; SVE floating-point unary operations.

>   (define_code_iterator SVE_FP_UNARY [neg abs sqrt])


> +(define_code_iterator SVE_INT_BINARY [plus minus smax umax smin umin

> +                                     and ior xor])

> +

>   (define_code_iterator SVE_INT_BINARY_SD [div udiv])


>   ;; SVE integer comparisons.

> @@ -1381,6 +1377,7 @@ (define_mode_attr lconst_atomic [(QI "K"


>   ;; The integer SVE instruction that implements an rtx code.

>   (define_code_attr sve_int_op [(plus "add")

> +                             (minus "sub")

>                                (div "sdiv")

>                                (udiv "udiv")

>                                (neg "neg")

> @@ -1538,14 +1535,7 @@ (define_int_iterator UNPACK_UNSIGNED [UN


>   (define_int_iterator MUL_HIGHPART [UNSPEC_SMUL_HIGHPART

UNSPEC_UMUL_HIGHPART])

> -(define_int_iterator SVE_COND_INT_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB

> -                                     UNSPEC_COND_SMAX UNSPEC_COND_UMAX

> -                                     UNSPEC_COND_SMIN UNSPEC_COND_UMIN

> -                                     UNSPEC_COND_AND

> -                                     UNSPEC_COND_ORR

> -                                     UNSPEC_COND_EOR])

> -

> -(define_int_iterator SVE_COND_FP_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB])

> +(define_int_iterator SVE_COND_FP_BINARY [UNSPEC_COND_ADD

UNSPEC_COND_SUB])

>   (define_int_iterator SVE_COND_FP_CMP [UNSPEC_COND_LT UNSPEC_COND_LE

>                                        UNSPEC_COND_EQ UNSPEC_COND_NE

> @@ -1575,14 +1565,7 @@ (define_int_attr optab [(UNSPEC_ANDF "an

>                          (UNSPEC_IORV "ior")

>                          (UNSPEC_XORV "xor")

>                          (UNSPEC_COND_ADD "add")

> -                       (UNSPEC_COND_SUB "sub")

> -                       (UNSPEC_COND_SMAX "smax")

> -                       (UNSPEC_COND_UMAX "umax")

> -                       (UNSPEC_COND_SMIN "smin")

> -                       (UNSPEC_COND_UMIN "umin")

> -                       (UNSPEC_COND_AND "and")

> -                       (UNSPEC_COND_ORR "ior")

> -                       (UNSPEC_COND_EOR "xor")])

> +                       (UNSPEC_COND_SUB "sub")])


>   (define_int_attr  maxmin_uns [(UNSPEC_UMAXV "umax")

>                                (UNSPEC_UMINV "umin")

> @@ -1793,15 +1776,5 @@ (define_int_attr cmp_op [(UNSPEC_COND_LT

>                           (UNSPEC_COND_GE "ge")

>                           (UNSPEC_COND_GT "gt")])


> -(define_int_attr sve_int_op [(UNSPEC_COND_ADD "add")

> -                            (UNSPEC_COND_SUB "sub")

> -                            (UNSPEC_COND_SMAX "smax")

> -                            (UNSPEC_COND_UMAX "umax")

> -                            (UNSPEC_COND_SMIN "smin")

> -                            (UNSPEC_COND_UMIN "umin")

> -                            (UNSPEC_COND_AND "and")

> -                            (UNSPEC_COND_ORR "orr")

> -                            (UNSPEC_COND_EOR "eor")])

> -

>   (define_int_attr sve_fp_op [(UNSPEC_COND_ADD "fadd")

>                              (UNSPEC_COND_SUB "fsub")])

Patch

Index: gcc/doc/md.texi
===================================================================
--- gcc/doc/md.texi	2018-05-24 09:31:46.687834412 +0100
+++ gcc/doc/md.texi	2018-05-24 09:32:10.522816506 +0100
@@ -6349,13 +6349,21 @@  operand 0, otherwise (operand 2 + operan
 @itemx @samp{cond_smax@var{mode}}
 @itemx @samp{cond_umin@var{mode}}
 @itemx @samp{cond_umax@var{mode}}
-Perform an elementwise operation on vector operands 2 and 3,
-under the control of the vector mask in operand 1, and store the result
-in operand 0.  This is equivalent to:
+When operand 1 is true, perform an operation on operands 2 and 3 and
+store the result in operand 0, otherwise store operand 4 in operand 0.
+The operation works elementwise if the operands are vectors.
+
+The scalar case is equivalent to:
+
+@smallexample
+op0 = op1 ? op2 @var{op} op3 : op4;
+@end smallexample
+
+while the vector case is equivalent to:
 
 @smallexample
-for (i = 0; i < GET_MODE_NUNITS (@var{n}); i++)
-  op0[i] = op1[i] ? op2[i] @var{op} op3[i] : op2[i];
+for (i = 0; i < GET_MODE_NUNITS (@var{m}); i++)
+  op0[i] = op1[i] ? op2[i] @var{op} op3[i] : op4[i];
 @end smallexample
 
 where, for example, @var{op} is @code{+} for @samp{cond_add@var{mode}}.
@@ -6364,8 +6372,9 @@  When defined for floating-point modes, t
 are not interpreted if @var{op1[i]} is false, just like they would not
 be in a normal C @samp{?:} condition.
 
-Operands 0, 2 and 3 all have mode @var{m}, while operand 1 has the mode
-returned by @code{TARGET_VECTORIZE_GET_MASK_MODE}.
+Operands 0, 2, 3 and 4 all have mode @var{m}.  Operand 1 is a scalar
+integer if @var{m} is scalar, otherwise it has the mode returned by
+@code{TARGET_VECTORIZE_GET_MASK_MODE}.
 
 @cindex @code{neg@var{mode}cc} instruction pattern
 @item @samp{neg@var{mode}cc}
Index: gcc/internal-fn.def
===================================================================
--- gcc/internal-fn.def	2018-05-24 09:31:46.687834412 +0100
+++ gcc/internal-fn.def	2018-05-24 09:32:10.522816506 +0100
@@ -173,7 +173,7 @@  DEF_INTERNAL_OPTAB_FN (REDUC_XOR, ECF_CO
 
 /* Extract the last active element from a vector.  */
 DEF_INTERNAL_OPTAB_FN (EXTRACT_LAST, ECF_CONST | ECF_NOTHROW,
-		       extract_last, cond_unary)
+		       extract_last, fold_left)
 
 /* Same, but return the first argument if no elements are active.  */
 DEF_INTERNAL_OPTAB_FN (FOLD_EXTRACT_LAST, ECF_CONST | ECF_NOTHROW,
Index: gcc/internal-fn.c
===================================================================
--- gcc/internal-fn.c	2018-05-24 09:31:46.687834412 +0100
+++ gcc/internal-fn.c	2018-05-24 09:32:10.522816506 +0100
@@ -2988,10 +2988,10 @@  #define expand_ternary_optab_fn(FN, STMT
   expand_direct_optab_fn (FN, STMT, OPTAB, 3)
 
 #define expand_cond_unary_optab_fn(FN, STMT, OPTAB) \
-  expand_direct_optab_fn (FN, STMT, OPTAB, 2)
+  expand_direct_optab_fn (FN, STMT, OPTAB, 3)
 
 #define expand_cond_binary_optab_fn(FN, STMT, OPTAB) \
-  expand_direct_optab_fn (FN, STMT, OPTAB, 3)
+  expand_direct_optab_fn (FN, STMT, OPTAB, 4)
 
 #define expand_fold_extract_optab_fn(FN, STMT, OPTAB) \
   expand_direct_optab_fn (FN, STMT, OPTAB, 3)
@@ -3219,12 +3219,19 @@  #define DEF_INTERNAL_FN(CODE, FLAGS, FNS
   0
 };
 
-/* Return a function that performs the conditional form of CODE, i.e.:
+/* Return a function that only performs CODE when a certain condition is met
+   and that uses a given fallback value otherwise.  For example, if CODE is
+   a binary operation associated with conditional function FN:
+
+     LHS = FN (COND, A, B, ELSE)
+
+   is equivalent to the C expression:
+
+     LHS = COND ? A CODE B : ELSE;
 
-     LHS = RHS1 ? RHS2 CODE RHS3 : RHS2
+   operating elementwise if the operands are vectors.
 
-   (operating elementwise if the operands are vectors).  Return IFN_LAST
-   if no such function exists.  */
+   Return IFN_LAST if no such function exists.  */
 
 internal_fn
 get_conditional_internal_fn (tree_code code)
Index: gcc/tree-vect-loop.c
===================================================================
--- gcc/tree-vect-loop.c	2018-05-24 09:31:46.687834412 +0100
+++ gcc/tree-vect-loop.c	2018-05-24 09:32:10.523816456 +0100
@@ -7222,8 +7222,9 @@  vectorizable_reduction (gimple *stmt, gi
 		}
 	      tree mask = vect_get_loop_mask (gsi, masks, vec_num * ncopies,
 					      vectype_in, i * ncopies + j);
-	      gcall *call = gimple_build_call_internal (cond_fn, 3, mask,
-							vop[0], vop[1]);
+	      gcall *call = gimple_build_call_internal (cond_fn, 4, mask,
+							vop[0], vop[1],
+							vop[0]);
 	      new_temp = make_ssa_name (vec_dest, call);
 	      gimple_call_set_lhs (call, new_temp);
 	      gimple_call_set_nothrow (call, true);
Index: gcc/config/aarch64/aarch64-sve.md
===================================================================
--- gcc/config/aarch64/aarch64-sve.md	2018-05-24 09:32:03.433159783 +0100
+++ gcc/config/aarch64/aarch64-sve.md	2018-05-24 09:32:10.521816556 +0100
@@ -1787,14 +1787,31 @@  (define_insn "*<maxmin_uns><mode>3"
   "<maxmin_uns_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"
 )
 
+;; Predicated integer operations with select.
+(define_expand "cond_<optab><mode>"
+  [(set (match_operand:SVE_I 0 "register_operand")
+	(unspec:SVE_I
+	  [(match_operand:<VPRED> 1 "register_operand")
+	   (SVE_INT_BINARY:SVE_I
+	     (match_operand:SVE_I 2 "register_operand")
+	     (match_operand:SVE_I 3 "register_operand"))
+	   (match_operand:SVE_I 4 "register_operand")]
+	  UNSPEC_SEL))]
+  "TARGET_SVE"
+{
+  gcc_assert (rtx_equal_p (operands[2], operands[4]));
+})
+
 ;; Predicated integer operations.
-(define_insn "cond_<optab><mode>"
+(define_insn "*cond_<optab><mode>"
   [(set (match_operand:SVE_I 0 "register_operand" "=w")
 	(unspec:SVE_I
 	  [(match_operand:<VPRED> 1 "register_operand" "Upl")
-	   (match_operand:SVE_I 2 "register_operand" "0")
-	   (match_operand:SVE_I 3 "register_operand" "w")]
-	  SVE_COND_INT_OP))]
+	   (SVE_INT_BINARY:SVE_I
+	     (match_operand:SVE_I 2 "register_operand" "0")
+	     (match_operand:SVE_I 3 "register_operand" "w"))
+	   (match_dup 2)]
+	  UNSPEC_SEL))]
   "TARGET_SVE"
   "<sve_int_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"
 )
@@ -2566,14 +2583,35 @@  (define_expand "vec_pack_<su>fix_trunc_v
   }
 )
 
+;; Predicated floating-point operations with select.
+(define_expand "cond_<optab><mode>"
+  [(set (match_operand:SVE_F 0 "register_operand")
+	(unspec:SVE_F
+	  [(match_operand:<VPRED> 1 "register_operand")
+	   (unspec:SVE_F
+	     [(match_dup 1)
+	      (match_operand:SVE_F 2 "register_operand")
+	      (match_operand:SVE_F 3 "register_operand")]
+	     SVE_COND_FP_BINARY)
+	   (match_operand:SVE_F 4 "register_operand")]
+	  UNSPEC_SEL))]
+  "TARGET_SVE"
+{
+  gcc_assert (rtx_equal_p (operands[2], operands[4]));
+})
+
 ;; Predicated floating-point operations.
-(define_insn "cond_<optab><mode>"
+(define_insn "*cond_<optab><mode>"
   [(set (match_operand:SVE_F 0 "register_operand" "=w")
 	(unspec:SVE_F
 	  [(match_operand:<VPRED> 1 "register_operand" "Upl")
-	   (match_operand:SVE_F 2 "register_operand" "0")
-	   (match_operand:SVE_F 3 "register_operand" "w")]
-	  SVE_COND_FP_OP))]
+	   (unspec:SVE_F
+	     [(match_dup 1)
+	      (match_operand:SVE_F 2 "register_operand" "0")
+	      (match_operand:SVE_F 3 "register_operand" "w")]
+	     SVE_COND_FP_BINARY)
+	   (match_dup 2)]
+	  UNSPEC_SEL))]
   "TARGET_SVE"
   "<sve_fp_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"
 )
Index: gcc/config/aarch64/iterators.md
===================================================================
--- gcc/config/aarch64/iterators.md	2018-05-24 09:32:03.433159783 +0100
+++ gcc/config/aarch64/iterators.md	2018-05-24 09:32:10.521816556 +0100
@@ -464,13 +464,6 @@  (define_c_enum "unspec"
     UNSPEC_UMUL_HIGHPART ; Used in aarch64-sve.md.
     UNSPEC_COND_ADD	; Used in aarch64-sve.md.
     UNSPEC_COND_SUB	; Used in aarch64-sve.md.
-    UNSPEC_COND_SMAX	; Used in aarch64-sve.md.
-    UNSPEC_COND_UMAX	; Used in aarch64-sve.md.
-    UNSPEC_COND_SMIN	; Used in aarch64-sve.md.
-    UNSPEC_COND_UMIN	; Used in aarch64-sve.md.
-    UNSPEC_COND_AND	; Used in aarch64-sve.md.
-    UNSPEC_COND_ORR	; Used in aarch64-sve.md.
-    UNSPEC_COND_EOR	; Used in aarch64-sve.md.
     UNSPEC_COND_LT	; Used in aarch64-sve.md.
     UNSPEC_COND_LE	; Used in aarch64-sve.md.
     UNSPEC_COND_EQ	; Used in aarch64-sve.md.
@@ -1207,6 +1200,9 @@  (define_code_iterator SVE_INT_UNARY [neg
 ;; SVE floating-point unary operations.
 (define_code_iterator SVE_FP_UNARY [neg abs sqrt])
 
+(define_code_iterator SVE_INT_BINARY [plus minus smax umax smin umin
+				      and ior xor])
+
 (define_code_iterator SVE_INT_BINARY_SD [div udiv])
 
 ;; SVE integer comparisons.
@@ -1381,6 +1377,7 @@  (define_mode_attr lconst_atomic [(QI "K"
 
 ;; The integer SVE instruction that implements an rtx code.
 (define_code_attr sve_int_op [(plus "add")
+			      (minus "sub")
 			      (div "sdiv")
 			      (udiv "udiv")
 			      (neg "neg")
@@ -1538,14 +1535,7 @@  (define_int_iterator UNPACK_UNSIGNED [UN
 
 (define_int_iterator MUL_HIGHPART [UNSPEC_SMUL_HIGHPART UNSPEC_UMUL_HIGHPART])
 
-(define_int_iterator SVE_COND_INT_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB
-				      UNSPEC_COND_SMAX UNSPEC_COND_UMAX
-				      UNSPEC_COND_SMIN UNSPEC_COND_UMIN
-				      UNSPEC_COND_AND
-				      UNSPEC_COND_ORR
-				      UNSPEC_COND_EOR])
-
-(define_int_iterator SVE_COND_FP_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB])
+(define_int_iterator SVE_COND_FP_BINARY [UNSPEC_COND_ADD UNSPEC_COND_SUB])
 
 (define_int_iterator SVE_COND_FP_CMP [UNSPEC_COND_LT UNSPEC_COND_LE
 				      UNSPEC_COND_EQ UNSPEC_COND_NE
@@ -1575,14 +1565,7 @@  (define_int_attr optab [(UNSPEC_ANDF "an
 			(UNSPEC_IORV "ior")
 			(UNSPEC_XORV "xor")
 			(UNSPEC_COND_ADD "add")
-			(UNSPEC_COND_SUB "sub")
-			(UNSPEC_COND_SMAX "smax")
-			(UNSPEC_COND_UMAX "umax")
-			(UNSPEC_COND_SMIN "smin")
-			(UNSPEC_COND_UMIN "umin")
-			(UNSPEC_COND_AND "and")
-			(UNSPEC_COND_ORR "ior")
-			(UNSPEC_COND_EOR "xor")])
+			(UNSPEC_COND_SUB "sub")])
 
 (define_int_attr  maxmin_uns [(UNSPEC_UMAXV "umax")
 			      (UNSPEC_UMINV "umin")
@@ -1793,15 +1776,5 @@  (define_int_attr cmp_op [(UNSPEC_COND_LT
 			 (UNSPEC_COND_GE "ge")
 			 (UNSPEC_COND_GT "gt")])
 
-(define_int_attr sve_int_op [(UNSPEC_COND_ADD "add")
-			     (UNSPEC_COND_SUB "sub")
-			     (UNSPEC_COND_SMAX "smax")
-			     (UNSPEC_COND_UMAX "umax")
-			     (UNSPEC_COND_SMIN "smin")
-			     (UNSPEC_COND_UMIN "umin")
-			     (UNSPEC_COND_AND "and")
-			     (UNSPEC_COND_ORR "orr")
-			     (UNSPEC_COND_EOR "eor")])
-
 (define_int_attr sve_fp_op [(UNSPEC_COND_ADD "fadd")
 			    (UNSPEC_COND_SUB "fsub")])